| Step | | Procedure & Parts & Tools |
| 1 |
|
LOCATE THE DRAIN HOSES ON THE BACK OF THE MACHINE
|
| 2 |
|
PULL TO REMOVE THE BLUE CAPPED HOSE FROM MACHINE. PLACE HOSE NEAR DRAIN AND REMOVE CAP
|
| 3 |
|
PULL TO REMOVE THE RED CAPPED HOSE FROM MACHINE. PLACE HOSE NEAR DRAIN AND REMOVE CAP
|
| 4 |
|
LOCATE THE 2 BOLTS AT THE FRONT BASE OF MACHINE. REMOVE THE 2 BOLTS ON EACH SIDE OF BASE (SET BOLTS ASIDE)
| Wrench-Allen metric 6.0mm |
|
|
| 5 |
|
LIFT THE FRONT OF THE TANK TO OPEN THE MACHINE AND LOCATE THE BATTERIES
|
| 6 |
|
VISUALLY INSPECT THE BATTERY CABLES FOR CONNECTIVITY, CORROSION AND DAMAGE
|
| 7 |
|
CLOSE THE MACHINE AND REINSTALL THE TANK BOLTS IF CABLES ARE OK. FILL THE SOLUTION TANK IF NEEDED
| Wrench-Allen metric 6.0mm |
|
|