| Step | | Procedure & Parts & Tools |
| 1 |
|
TURN THE COVER AND LIFT UP TO REMOVE IT.
|
| 2 |
|
LIFT THE SEAT UP TO ACCESS THE VACUUM COVER.
|
| 3 |
|
LIFT UP ON THE VACUUM COVER TO REMOVE IT.
|
| 4 |
|
PULL UP ON THE VAC MOTOR GASKET TO REMOVE IT FROM THE MOTOR.
|
| 5 |
|
REMOVE THE 4 SCREWS HOLDING THE VAC MOTOR COVER.
| Screwdriver-phillips |
|
|
| 6 |
|
LIFT THE VAC MOTOR COVER OFF THE VAC MOTOR. SLIDE THE 2 WHITE PLASTIC CARBON BRUSHES FROM THE VAC MOTOR.
|
| 7 |
|
INSPECT THE EXPOSED PART OF THE CARBON BRUSHES FOR DAMAGE AND WEAR. THE CARBON BRUSH WILL NEED TO BE REPLACED IF BELOW A 1/2 INCH.
|
| 8 |
|
IF THE CARBON BRUSHES ARE OKAY, REVERSE STEPS 1 THRU 6 TO REASSEMBLE THE MACHINE.
|