| Step | | Procedure & Parts & Tools |
| 1 |
|
LIFT THE SEAT AND ATTACHED BATTERY COVER FROM MACHINE.
|
| 2 |
|
REMOVE THE SCREW HOLDING THE BOX COVER.
| Screwdriver-phillips |
|
|
| 3 |
|
LIFT THE BOX COVER FROM THE MACHINE.
|
| 4 |
|
LOCATE THE 2 CIRCUIT BREAKERS FOR THE BRUSHES. NOTE: THE BRUSH CIRCUIT BREAKERS ARE THE MIDDLE BREAKER AND THE BREAKER ON THE RIGHT (STANDING IN FRONT OF THE CIRCUIT BREAKER PUSH BUTTONS). PLACE THE VOLT METER PROBES ON THE SCREW HEADS. ONE PROBE ON THE TOP SCREW AND ONE PROBE ON THE BOTTOM SCREW. TURN THE VOLT METER TO CONTINUITY. IF THE VOLT METER BEEPS, THE CIRCUIT BREAKERS ARE OKAY.
| Volt meter (True RMS capable) |
&Width=100)
|
|
| 5 |
|
REPEAT STEP 4 FOR THE OTHER CIRCUIT BREAKER. REVERSE STEPS 1 THRU 3 TO REASSEMBLE THE MACHINE.
| Volt meter (True RMS capable) |
|
|