Step | | Procedure & Parts & Tools |
1 |
|
Disconnect the Main Negative Battery lead.
Wrench-9/16 in |
|
|
2 |
|
Remove 2 screws at the rear panel.
Screwdriver-phillips |
|
|
3 |
|
Remove the 2 screws holding the drive button in.
Screwdriver-phillips |
|
|
4 |
|
Locate these 2 red wires behind the panel.
|
6 |
|
Pull these connectors apart.
|
7 |
|
Pull the switch down, fishing the wires through the handle
|
8 |
|
remove the black plastic jam nut, slide past the wires.
|
9 |
|
Remove rubber cover and metal plate.
Reverse Steps to reinstall new switch.
|