Step | | Procedure & Parts & Tools |
1 |
|
Disconnect the Main Negative Battery lead.
Wrench-9/16 in |
|
|
2 |
|
Remove 2 screws at the rear panel.
Screwdriver-phillips |
|
|
3 |
|
With a crescent or similar wrench, loosen the jam nut around the key switch.
Crescent wrench |
|
|
4 |
|
disconnect the wires from the key switch
|
5 |
|
Pull key switch out from control panel.
Reverse Steps to reinstall new switch. Note the orientation of the key with the on/off markings of the label.
|