| Step | | Procedure & Parts & Tools |
| 1 |
|
PULL THE VAC HOSE FROM THE RECOVERY TANK COVER.
|
| 2 |
|
PLACE YOUR HAND OVER THE END OF THE VAC HOSE. TURN THE MACHINE ON AND TURN ON THE VAC MOTOR. IF THE SUCTION IS WEAK, CHECK THE HOSE FOR A CLOG BY GENTLY INSERTING A COAT HANGER INTO THE HOSE. INSPECT THE RECOVERY TANK COVER FOR A GOOD SEAL AS THIS WILL ALSO CAUSE LOW SUCTION.
|
| 3 |
|
LAY THE MACHINE BACK AND REST ON ITS HANDLE.
|
| 4 |
|
REMOVE THE 2 METAL GUARDS FROM THE VAC SHOE. NOTE: YOU MAY NEED TO GENTLY PRY THESE FROM MACHINE WITH A SCREWDRIVER.
| Screwdriver-flat tip |
|
|
| 5 |
|
INSERT A LONG SCREWDRIVER INTO THE VAC SHOE AND MOVE IT BACK AND FORTH TO CHECK FOR A CLOG.
| Screwdriver-flat tip |
|
|