The vacuum’s spring-assisted design means lighter handle weight and less operator fatigue. The ergonomic handle is designed to fit every operator comfortably.
Robust performance
This upright vacuum is designed for years of use with its rotationally-molded base and robust foot latch. Three levels of filtration down to .1 micron at 99.99% efficiency help improve indoor air quality.
Productive product features
With variable height settings, this unit accommodates a variety of floor surfaces. Low profile capabilities allow the vacuum to lay flat to clean under hard to reach areas.
• Rotationally-molded base is more durable than commonly used injected molded plastic
•Dual motor design with separate vacuum and brush motors deliver powerful, dirt-lifting suction
• Multi-signal indicator light alerts for product and user safety
Airflow at 2 in / 50 mm orifice: 125 cfm / 3.54 m3/h
Vacuum motor hp: 1 hp / .75 kW each
Vacuum motor type: Through flow, single stage, thermal protected
Vacuum motor watts/amps: 915 watts / 7.9 A
Water lift at sealed orifice : 0 in / 2030 mm
Brush belt description: Dual, round drive belts
Brush type: Single row, chevron pattern
Brush size: 2.25 / 57 mm in diameter, 12 in / 305 mm length
Brush motor HP: 0.1 hp / .07 kW
Brush motor RPM: 6000
Brush RPM: 3000
Brush height: Adjustable to 6 positions with manual dial
Triple filtration system: Filter bag, vac motor filter, and post filter
Triple filtration description: High efficiency (99.9%) at 0.3 micron
Vacuum bag capacity: Top fill design, 5.2 qt / 5 L
Vacuum hose length: 1.5 ft / 0.46 m (4:1 stretch ratio)
Electrical system: Printed circuit board protected
Indicator light: Multi - Signal light system for improved safety
Power cord length: 40 ft / 12 m
Construction: Rotationally-molded polyethylene
Length: 14.5 in / 368 mm
Width: 14 in / 356 mm
Height: 47 in / 1190 mm
Weight: 21 lb / 9.53 kg
Sound level (at operator’s ear): 69.5 dBA
Tennant V-HDU-14 Parts and Support
increase user comfort
the vacuum’s spring-assisted design means lighter handle weight and less operator fatigue. the ergonomic handle is designed to fit every operator comfortably.
robust performance
this upright vacuum is designed for years of use with its rotationally-molded base and robust foot latch. three levels of filtration down to .1 micron at 99.99% efficiency help improve indoor air quality.
productive product features
with variable height settings, this unit accommodates a variety of floor surfaces. low profile capabilities allow the vacuum to lay flat to clean under hard to reach areas.
• rotationally-molded base is more durable than commonly used injected molded plastic
•dual motor design with separate vacuum and brush motors deliver powerful, dirt-lifting suction
• multi-signal indicator light alerts for product and user safety
airflow at 2 in / 50 mm orifice: 125 cfm / 3.54 m3/h
vacuum motor hp: 1 hp / .75 kw each
vacuum motor type: through flow, single stage, thermal protected
vacuum motor watts/amps: 915 watts / 7.9 a
water lift at sealed orifice : 0 in / 2030 mm
brush belt description: dual, round drive belts
brush type: single row, chevron pattern
brush size: 2.25 / 57 mm in diameter, 12 in / 305 mm length
brush motor hp: 0.1 hp / .07 kw
brush motor rpm: 6000
brush rpm: 3000
brush height: adjustable to 6 positions with manual dial
triple filtration system: filter bag, vac motor filter, and post filter
triple filtration description: high efficiency (99.9%) at 0.3 micron
vacuum bag capacity: top fill design, 5.2 qt / 5 l
vacuum hose length: 1.5 ft / 0.46 m (4:1 stretch ratio)
electrical system: printed circuit board protected
indicator light: multi - signal light system for improved safety
power cord length: 40 ft / 12 m
construction: rotationally-molded polyethylene
length: 14.5 in / 368 mm
width: 14 in / 356 mm
height: 47 in / 1190 mm
weight: 21 lb / 9.53 kg
sound level (at operator’s ear): 69.5 dba
the vacuum’s spring-assisted design means lighter handle weight and less operator fatigue. the ergonomic handle is designed to fit every operator comfortably.
robust performance
this upright vacuum is designed for years of use with its rotationally-molded base and robust foot latch. three levels of filtration down to .1 micron at 99.99% efficiency help improve indoor air quality.
productive product features
with variable height settings, this unit accommodates a variety of floor surfaces. low profile capabilities allow the vacuum to lay flat to clean under hard to reach areas.
• rotationally-molded base is more durable than commonly used injected molded plastic
•dual motor design with separate vacuum and brush motors deliver powerful, dirt-lifting suction
• multi-signal indicator light alerts for product and user safety
airflow at 2 in / 50 mm orifice: 125 cfm / 3.54 m3/h
vacuum motor hp: 1 hp / .75 kw each
vacuum motor type: through flow, single stage, thermal protected
vacuum motor watts/amps: 915 watts / 7.9 a
water lift at sealed orifice : 0 in / 2030 mm
brush belt description: dual, round drive belts
brush type: single row, chevron pattern
brush size: 2.25 / 57 mm in diameter, 12 in / 305 mm length
brush motor hp: 0.1 hp / .07 kw
brush motor rpm: 6000
brush rpm: 3000
brush height: adjustable to 6 positions with manual dial
triple filtration system: filter bag, vac motor filter, and post filter
triple filtration description: high efficiency (99.9%) at 0.3 micron
vacuum bag capacity: top fill design, 5.2 qt / 5 l
vacuum hose length: 1.5 ft / 0.46 m (4:1 stretch ratio)
electrical system: printed circuit board protected
indicator light: multi - signal light system for improved safety
power cord length: 40 ft / 12 m
construction: rotationally-molded polyethylene
length: 14.5 in / 368 mm
width: 14 in / 356 mm
height: 47 in / 1190 mm
weight: 21 lb / 9.53 kg
sound level (at operator’s ear): 69.5 dba
Parts
Can't find what you need? Click here or call 1-800-USA-CLEAN
In the market for a new machine? You can find quality new and reconditioned floor care equipment at one of our vendor partners:
Need a professional? We offer service both virtually and in person.
Learn more
