- Batteries, Brushes, and Chargers

#PartDescription ReqNotesAvailability
183-0358 High/low grout brush - CYLINDRICAL (orange) 1 (for models 1.127-121.0/-321.0/-683.0/-805.0/-809.0)
183-0360 Soft scrub brush black 1 (for models 1.127-121.0/-321.0/-683.0/-805.0/-809.0)
183-0363 Grey brush roll 1 (for models 1.127-221.0/-421.0/-807.0)
183-0364 Black brush roll 1 (for models 1.127-221.0/-421.0/-807.0)
373-3043 Brush roller (black) 1 (for models 1.127-121.0/-321.0/-805.0/-809.0)

- Commonly Asked For Parts

#PartDescription ReqNotesAvailability
1b 373-3040 Brush roller (orange)
1d 373-3042 Brush roller (white)
1e 373-3043 Brush roller (black)

- Pad Holders

#PartDescription ReqNotesAvailability
1 991-2214 Center-Lok II pad holder - left hand thread (red)
2a 991-2201 Center-Lok II pad holder - right hand thread (black) (Pad driver side female, Floor side male)
3a 991-2202 Big mouth pad holder set (blue) (includes 3 screws)
3b 991-2205 Deep lock ring and pad grip ring
4 991-2203 Big mouth pad holder male thread portion
5 991-2206 Center-Lok 3 pad holder (includes 3 screws)
6 996-0372 Big mouth pad holder (left hand thread)
8 991-2209 Split retainer - pad holder ring (OBSOLETE)
9 N/A Not available (replaced by #3 991-2202)
10 991-2211 Center lock pad holding cup (male) (yellow) (OBSOLETE)

Accessories-1

#PartDescription ReqNotesAvailability
0a 183-0417 Roller pad holder 1 (for models 1.127-121.0/-131.0/161.0/-321.0/-331.0/-361.0) (includes 1,3,7-8)
0b 183-0418 Cylindrical pad shaft 1 (for models 1.127.221.0/-231.0/-261.0/-421.0/-431.0/-461.0) (includes 1,3,7-8)
1 183-0454 Washer 1
3 183-0575 Brush bearing (OBSOLETE) 1
6a 183-0423 White pad 96 20 pcs 1 (white)
6c 183-0425 Green pad 96 20 pcs 1 (green)
6d 183-0426 Red pad 96 20 pcs 1 (red)
7 183-0427 Ronde 1
8 183-0428 Spring clip 1

Accessories-2

#PartDescription ReqNotesAvailability
0 183-7478 Caster assembly 1 (includes 1-19)
1 183-0460 Handle 1
2 183-0455 Bracket (OBSOLETE) 1
3 183-0467 Axle 1
4 183-0457 Quick fastener 2
5 183-0461 Bracket 1
6 183-0468 Bolt 1
7 183-0196 Washer lock 1
8 183-7556 Helical spring 1
9 183-0456 Button (OBSOLETE) 1
10 183-4708 Caster 1
13 183-0463 Hex nut 1
14 183-0464 Cap 1
18 183-0466 Template (OBSOLETE) 1
19 183-7555 Joint ring 1

Chassis Assembly

#PartDescription ReqNotesAvailability
6 183-0089 Sleeve 2 (before SN 13377)
7 183-0218 Hex nut 2
9 183-0220 Axle (Obsolete) 1 (before SN 13377)
10 183-0222 Bracket (Obsolete) 1 (before SN 13377)
11 183-0224 Carrier 1 (before SN 13377)
12 183-0226 Washer (Obsolete) 1
13 183-0227 Hex nut 1
14 183-0256 Washer (OBSOLETE) 2
16 183-0229 Wheel cab 2
18 183-0099 Washer 2
20 183-0236 Screw 2
23 183-0238 Helical spring 1
28 183-0087 Protecting cap 2
30 183-0240 Washer 1
31 183-0241 Washer lock 1
42 183-0251 Washer 1
45 183-0255 Washer 2
46 183-0257 Wheel 2
47 183-0258 Spring clip 2
48 183-0234 Bracket (Obsolete) 1 (after SN 13376)

Control Panel Assembly

#PartDescription ReqNotesAvailability
1 273-9184 Flat gasket 1
2 183-0132 Closure 1
5 373-2070 Capacitor 1
6 183-0139 Cable tie (Obsolete) 1
7 183-0110 Switch 1
12 373-1441 O-ring seal 1
13 373-1449 Screen 1
14 183-9710 Ground decal 2
15 373-2071 Protecting cap 1
16 183-6007 Motor protection switch 1
17 273-6476 Screw 1
19 999-1619 Nut M4 hex stainless steel 3
21b 373-2080 Control panel 1 (before SN 35012)
22 183-0114 Ornamental hub cap 1
24 183-0116 Handle 1
26 183-0118 Helecal spring 1
27 183-0119 Bar 1
28 183-0142 Tie band 6
30 183-0143 Double nipple connector 1
31 183-7489 Manual ball valve 1
33 183-0122 Angle Socket 1
34 183-0123 Hose clamp 1
35 183-0124 Hose 2in (to order as cut goods)
36a 373-2072 Cable with plug 1 (before SN 47202 for model numbers 1.127-121.0/-221.0/-321.0/-421.0/-805.0/-807.0)
36c 373-2073 Cable with plug RA 1 (before SN 47202 for model number 1.127-809.0)
36e 373-2075 Cable with plug 1 (after SN 47201 for model numbers 1.127-321.0/-421.0)
36f 373-2076 Cable with plug 1 (after SN 47201 for model number 1.127-683.0)
36h N/A Not available 1 (cable)
26i 373-2082 Cable with plug 1 (before SN 35012)
44 N/A Not available 2 (plug)
48a 183-6009 Capacitor 1 (only for IBMEI-Motor) (models 1.127-121.0/-221.0/-321.1/-421.1/-683.0/-805.0/-807.0/-809.0)
50 183-0133 Screw 5
53 183-0153 Hex nut (Obsolete) 1
54a 183-6010 Relay 1 (for models 1.127-121.0/-221.0-/-321.0/-421.0/-805.0/-807.0/-809.0)
55a 373-2079 Plate 1 (after SN 35011)
56 273-9959 Screw M3 x 8 3
57 183-0243 Washer 2
59 273-9209 Serrated lock washer 4 (after SN 47200)
61 183-6011 Mid-size autoscrubber PCB 1 (after SN 47200)
N/S 373-2081 Holder 1 (before SN 35012) (for models 1.127-121.0/-221.0/-321.0/-421.0/-805.0/-807.0/-809.0)
N/S 373-1709 Pipe clamp 1 (before SN 35012) (for models 1.127-121.0/-221.0/-321.0/-421.0/-805.0/-807.0/-809.0)
N/S 183-0111 Screw (Obsolete) 1 (before SN 35012)
N/S 183-0115 Sheet metal screw (Obsolete) 1 (before SN 35012)
N/S 183-0121 Double nipple 1 (before SN 35012)
N/S 183-0126 Gasket 1 (before SN 35012)
N/S 183-0127 Closing screw 1 (before SN 35012)
N/S 183-0146 Insulating house 5 (before SN 35012) (all CVD uprights)

Cover Assembly

#PartDescription ReqNotesAvailability
0 183-0068 Housing with cover 1 (includes 1-4, 7, 17, 28-30, 33-37)
2 N/A Not available 1 (housing)
4 183-0072 Joint ring 1
6 183-0074 Washer 1
8 183-0474 Joint ring gasket 1
9 183-0077 Bolt 3
11 173-9058 Nut M6-8 hex 3
12.1 183-6012 Vacuum motor 1 (includes 31) (old version)
12.3 173-9055 120V vacuum motor 1 (includes 31) (for model 1.127-683.0)
14 183-0082 Sound proof hose 1
16 183-0084 Screw 1
19 183-0087 Protecting cap 2
20 183-0088 Plate 1
27 183-0094 Gasket 1
28 183-0095 Plate 1
29 183-0097 Plate (OBSOLETE) 1
30 183-0098 Seal 1
31 173-9061 Carbon brush set 1
35 N/A Not available 1 (housing)
36 183-0128 Cellular rubber cord 1
37 183-0113 Decal (Obsolete) 1
40 183-6013 Capacitor 1 (for model 1.127-683.0)
42 373-2086 LOCK WASHER A 13,0 1 (for model 1.127-683.0)
43 373-2087 Angle 1 (for model 1.127-683.0)
44 183-0182 Cheese head screw 1 (for model 1.127-683.0)
47 N/A Not available 2 (for model 1.127-683.0) (Plug-in connection)
N/S 173-9897 Cable tie 1

Handle Assembly-After SN 35011

#PartDescription ReqNotesAvailability
1 183-0185 Strap 1
2 183-0186 Hose 1
5 183-0169 Cheese head screw 4
6 183-0087 Protecting cap 4
7 183-0188 Pull relief 1
11a 183-0192 Oil resistant drain hose 1 (before SN 40382)
14 183-0194 Strap (OBSOLETE) 1
15 183-0195 Switch knob 1
16 183-0196 Washer lock 2
17 183-0197 Wheel cap 3
18 183-0075 Screw 5-16 x 10.9mm 7
20 183-0200 Plate 1
21 183-0201 Washer (Obsolete) 2
23 183-0202 Screw 1
27 183-0205 Plate 1
28 183-2026 Washer lock 1
31 183-0207 Extension spring 1
43b 183-6014 Microswitch 1 (after SN 47200) (includes 44)
44 183-0175 Insulating hose 1
N/S 183-0182 Cheese head screw 1

Handle Assembly-Before SN 35012

#PartDescription ReqNotesAvailability
21 183-0158 Flat head screw (Obsolete) 3
31 373-2089 Plate 1
40 183-0161 Drain hose cap 1 (before SN 14815)
42 183-0163 Sheet metal screw 2
43 183-6014 Microswitch 1
46a 183-0165 Handle 1 (before SN 14815) (includes 76)
46b 183-0166 Handle (Obsolete) 1 (after SN 14814) (includes 76)
49 N/A Not available 1 (bushing)
50 183-0169 Cheese head screw 4
51 183-0087 Protecting cap 4
53 183-0170 Washer lock 4
54 183-0171 Bolt 2
55 183-0172 Bracket 2
56 183-0173 Covering cap 1
57 183-0174 Sheet metal screw 2
58 373-2092 Cable 1
59 183-0175 Insulating hose 1 (to order as cut goods)
60 373-2090 Rubber cap 1
61 183-0177 Pin 3 (quantity according to demand)
63b 183-0180 Drain hose (OBSOLETE) 1 (before SN 14770)
73 183-0181 Washer (Obsolete) 2
74 183-0092 Pipe clip 1 (after SN 14814)
75 183-0182 Cheese head screw 1 (after SN 14814)
76 183-0183 Hose (Obsolete) 1 (after SN 14814)

Power Brush Assembly

#PartDescription ReqNotesAvailability
2 183-0206 Screw 8
3 183-0353 Counter holder 1
7 183-0355 Cable connector (obsolete) 1
9a 183-4702 Medium grit brush CYLINDRICAL 2 (for models 1.127-121.0/-321.0/-683.0/-805.0/-809.0)
9b 183-0358 High/low grout brush - CYLINDRICAL (orange) 2 (for models 1.127-121.0/-321.0/-683.0/-805.0/-809.0)
9c 183-0359 Extra heavy grit scrubbing brush (gray) 2 (for models 1.127-121.0/-321.0/-683.0/-805.0/-809.0)
9d 183-0360 Soft scrub brush black 2 (for models 1.127-121.0/-321.0/-683.0/-805.0/-809.0)
9e 183-0361 Standard brush roll 2 (for models 1.127-221.0/-421.0/-807.0)
9f 183-4587 Orange hi low grit brush 2 (for models 1.127-221.0/-421.0/-807.0)
9g 183-0363 Grey brush roll 2 (for models 1.127-221.0/-421.0/-807.0)
9h 183-0364 Black brush roll 2 (for models 1.127-221.0/-421.0/-807.0)
9i 183-0483 Roller brush (very hard) (OBSOLETE) 2 (for models 1.127-221.0/-241.0)
10a 183-0365 Plate 1 (for models 1.127-121.0/-321.0/-683.0/-805.0/-809.0)
10b 183-0366 Plate 1 (for models 1.127-221.0/-421.0/-807.0)
11a 183-0367 Strip 1 (for models 1.127-121.0/-321.0/-683.0/-805.0/-809.0)
12 183-0281 Screw 14
13 183-0369 Spring 2
16 183-0373 Safety ring 3
17 183-0374 Sleeve 2
18 183-0375 Ball bearing 6
20 183-0378 Plate 1
21 183-0379 Washer 6
22 183-0093 Screw M6-1 x 16mm 10
23 183-0381 Screw 1
25 183-0382 Sleeve 1
31 183-0389 Cover plate 1
32 373-2095 Plug holder bracket 1
33a 373-2096 230V motor 1 (for models 1.127-121.0/-221.0/-321.0/-421.0/-805.0/-807.0/-809.0)
35 183-0393 Spring 1
36 183-0394 Quick fastener (OBSOLETE) 2
41 183-0397 Stand 1
43 183-0348 Roller 1
45 183-0400 Axle 1
50 183-0405 Hex nut 3
51 183-0406 Hex screw 1
52a 183-0407 Brush housing (Obsolete) 1 (for models 1.127-121.0/-321.0/-683.0/-805.0/-809.0)
53a 183-0409 Pipe 2 (for models 1.127-121.0/-421.0/-807.0)
53b 183-0401 Pipe 2
54 183-0216 Washer 3
55b 183-0411 Plate 1 (for models 1.127-221.0/-421.0/-807.0)
57 183-0412 Sleeve (Obsolete) 1
61 183-0415 Pin (threaded) 2 (after SN 35011)
62 273-3611 Wing nut 2 (after SN 35011)

Squeegee Assembly-Design 1

#PartDescription ReqNotesAvailability
3 183-0284 Star handle 2
4 183-0285 Washer (OBSOLETE) 2
5 183-0286 Pin (OBSOLETE) 2
6 173-6204 Washer 8M 2
9 183-0964 Knob (Obsolete) 2
10 183-0471 Washer 2
11 183-0289 Roller wheel 2
13 183-0291 Tail piece 1
14b 183-0293 Squeege blade set 1 (standard)
25 183-6016 Insert 1
30 183-0320 Bracket (Obsolete) 2
32 183-0323 Screw M5-.8 x 10mm stainless steel 2
33 183-0298 Angle 2
34 183-0303 Axle 2
35 183-0302 Screw 1
36 183-0301 Wheel 1
48 273-3480 36 inch squeegee assembly 1 (curved design)
51 183-0309 Profile (Obsolete) 1 (straight design)

Squeegee Assembly-Design 2

#PartDescription ReqNotesAvailability
15 183-0471 Washer 3
16 183-0964 Knob (Obsolete) 2
17 183-0459 Washer 2
18 183-0311 Pipe 2
19 183-0289 Roller wheel 2
20 183-0284 Star handle 2
22 183-0308 Plate 1
23 183-0314 Intake tube 1
24 183-0315 Pin (Obsolete) 2
28 183-0304 Hex nut 1
29 999-1261 Washer M6 flat stainless steel 2
30 183-0320 Bracket (Obsolete) 2
31 183-0485 Washer (OBSOLETE) 2
32 183-0323 Screw M5-.8 x 10mm stainless steel 2
34 183-0303 Axle 1
35 183-0302 Screw 1
38a 183-0327 Oil-resistant squeegee blade set 1 (oil resistant)
38c 183-0326 Anti-stripe squeegee blade set 1 (anti-strip) (oil resistant)
40 183-0299 Support wheels kit 2 (includes 28-35)
42 183-0486 Profile (OBSOLETE) 1 (curved design)
43 183-0487 Weight addition 1
45 999-1424 Nut M8-1.25 hex stainless steel 2

Squeegee Bracket Assembly

#PartDescription ReqNotesAvailability
17 183-0334 Moulded part (Obsolete) 1 (before SN 35012)
19 183-0181 Washer (Obsolete) 1 (before SN 35012)
21 183-0337 Pin (Obsolete) 1 (before SN 35012)
22 183-0338 Hex nut (Obsolete) 1 (before SN 35012)
24 183-0341 Hex nut 1
27 183-0197 Wheel cap 2
29 183-0237 Washer 2
30 183-0343 Screw 2
31 183-0344 Rocker 1
44 183-0347 Wing nut (Obsolete) 2
45 183-0099 Washer 1
46 183-0348 Roller 1
48 183-0350 Moulded part (Obsolete) 1 (before SN 35012)

Switch Box Assembly-Before SN 35012

#PartDescription ReqNotesAvailability
1 373-2098 Chest and mounting plate 1 (3 pieces)
2 N/A Not available 4 (cheese head screw)
3 999-1619 Nut M4 hex stainless steel 4
4 183-0182 Cheese head screw 3
8a 373-2099 16MF capacitor 1 (16MF)
8b 183-6009 Capacitor 1 (20MF)
9 183-0264 Screw (Obsolete) 2
10 373-2100 Nine pole terminal strip 1
11 N/A Not available 1 (terminal strip)
12 373-2101 Anti-interference capacitor 1