- Batteries, Brushes, and Charger

Click to enlarge

Part	Description	Req	Notes
175-5019	36V 750Ah wet battery (Tennant Industrial)	1
175-5018	36V 600Ah sealed battery (Tennant Industrial)	1
675-9151	BATTERY, WET, 36VDC 0380AH [TR] (Tennant Industrial)	1
675-9149	BATTERY, WET, 36VDC, 510AH (Tennant Industrial)	1
675-9200	BATTERY, WET, 36VDC, 750AH (Tennant Industrial)	1
275-8755	CHARGER, 36VDC 120A TRI-VAC 1PH 60HZ (Tennant Industrial)	1
675-8990	CHARGER, 36VDC/80A, 200-240VAC 3PH (Tennant Industrial)	1
275-8754	CHARGER, 36VDC 120A TRI-VAC 3PH 60HZ (Tennant Industrial)	1
275-8757	Charger 36V 93A (Tennant Industrial) (OBSOLETE)	1
275-8758	Charger 36V 93A (Tennant Industrial) (OBSOLETE)	1
275-8756	36V charger (Tennant Industrial) (OBSOLETE)	1
275-8279	BRUSH, SCB, 39L, 20SR, PYP, SPL (Tennant Industrial)	2	(MaxPro 1000)
275-8280	BRUSH, SCB, 39L, 20SR, SAB, SPL (Tennant Industrial)	2	(MaxPro 1000)
175-2978	BRUSH, SCB, 39L, 20SR, NYL, SPL (Tennant Industrial)	2	(MaxPro 1000)
175-0504	Scrub brush disk assembly 20 D Nylon (Tennant Industrial)	2	(MaxPro 1000)
996-1019	Polypropelene scrubbing brush ( Tennant Industrial)	2	(MaxPro 1000)
996-1624	19 inch heavy grit stripping brush - 80 grit	2	(MaxPro 1000)
275-8282	BRUSH, SCB, 47L, 20SR, PYP, SPL (Tennant Industrial)	2	(MaxPro 1200)
275-8283	BRUSH, SCB, 47L, 20SR, SAB, SPL (Tennant Industrial)	2	(MaxPro 1200)
275-8284	BRUSH, SCB, 47L, 20SR, NYL, SPL (Tennant Industrial)	2	(MaxPro 1200)
275-6002	16 inch super abrasive scrubbing brush	3	(MaxPro 1200)
996-1034	16 inch nylon scrubbing brush	3	(MaxPro 1200)
996-1037	16 inch polypropelene scrubbing brush	3	(MaxPro 1200)

- Frequently Replaced Parts

Click to enlarge

Part	Description	Req	Notes
675-9149	BATTERY, WET, 36VDC, 510AH (Tennant Industrial)	1
675-9190	BATTERY KIT, WET, 36VDC 0380AH, CI (Tennant Industrial)	1
675-9200	BATTERY, WET, 36VDC, 750AH (Tennant Industrial)	1
675-9151	BATTERY, WET, 36VDC 0380AH [TR] (Tennant Industrial)	1
275-8755	CHARGER, 36VDC 120A TRI-VAC 1PH 60HZ (Tennant Industrial)	1
675-8990	CHARGER, 36VDC/80A, 200-240VAC 3PH (Tennant Industrial)	1
275-8754	CHARGER, 36VDC 120A TRI-VAC 3PH 60HZ (Tennant Industrial)	1
275-4284	CONNECTOR, 350A, GRAY [ANDERSON] (Tennant Industrial)	1
175-2120	6 gauge black wire jumper cable	1	(after SN 001705)
175-3214	Key switch	1
175-3215	Key (sold individually)	1
991-3066	Key	1
175-0582	CHAIN, RLR, 40 X 129 PITCHES (Tennant Industrial)	1
175-2094	Chain	1
275-8315	CHAIN, RLR, 40 X 109 PITCHES (Tennant Industrial)	1
275-4304	CHAIN, SASH, 35, 07.2L 13 LINK (Tennant Industrial)	1
175-0583	LINK, CHAIN, RLR, 40 (Tennant Industrial)	1
675-0825	VALVE, WATER, SOLENOID - 36V (Tennant Industrial)	1
275-4208	VALVE, WATER, SOLENOID, 36VDC PF08/PF08 (Tennant Industrial	2
175-3408	Solution filter	1
175-0816	BLADE, SQGE, REAR, 51.38L linatex (Tennant Industrial)	1
275-2644	Squeegee assy 48 inch (1200mm) rear linatex (Tennant Ind)	1
275-8725	BLADE, SQGE, REAR, 58.62L linatex [48 inch] (Tennant Indus	1
175-0811	BLADE, SQGE, FRONT, 49.00L linatex (Tennant Industrial)	1
175-0833	BLADE, SQGE, FRONT, TILE, 49.00L linatex (Tennant Industria	1
275-8723	BLADE, SQGE, FRONT, 57.00L linatex [48 inch] (Tennant Indu	1
275-8729	BLADE, SQGE, FRONT, TILE, 57.00L linatex (Tennant Industria	1
175-0698	HOSE, VACUUM, 0.16ID X 006.0L (Tennant Industrial)	2
175-0751	HOSE, VACUUM, 091.0L (Tennant Industrial)	1
275-8618	HOSE, VACUUM, 058.5L (Tennant Industrial)	1	(before SN 001703)
275-8613	HOSE ASSY, W/2CUFF, 2.0D 075L 2.0/2.0 (Tennant Industrial)	1	(after SN 001702)
275-8617	HOSE, VACUUM, 2.00ID X 035.0L (Tennant Industrial)	1	(before SN 001703)
275-8614	HOSE ASSY, W/2CUFF, 2.0D 026L 2.0/2.0 (Tennant Industrial)	1	(after SN 001702)
175-0693	COVER KIT, RECVY, W/ GASKET (Tennant Industrial)	1	(before SN 005000)
275-9311	Recovery cover kit with gasket (teal) (Tennant Industrial)	1	(after SN 004999)
175-0694	GASKET, URE, .50, 12.65W 18.89L, ADH (Tennant Industrial)	1
175-0682	Plastic plug fitting	1	(before SN 001987)
175-0707	HOSE ASSY, DRAIN (Tennant Industrial)	1
275-5200	36V 3 stage vacuum motor kit	1
991-1202-D	36V 3 stage vacuum motor tangential with Delphi plug	2
275-5816	Carbon brush kit (pkg of 2)	1
275-0109	Carbon brush assembly	1
175-1113	Carbon brush (sold individually)	2
991-1222	Plastic covered carbon brush (sold individually)	2
275-9057	Carbon brush kit (OBSOLETE)	1
996-1624	19 inch heavy grit stripping brush - 80 grit	2
996-0165	16 inch heavy grit stripping brush - 80 grit	3
996-0116	16 inch medium grit scrubbing brush - 180 grit	3
996-0084	16 inch lite grit scrubbing brush - 500 grit	3
996-1019	Polypropelene scrubbing brush ( Tennant Industrial)	2
996-1037	16 inch polypropelene scrubbing brush	3
996-1389	Pad driver	1
996-0186	16 inch Pad driver	3
996-0086	Clutch plate	2	(qty 3 for MaxPro 1200)
991-2214	Center-Lok II pad holder - left hand thread (red)	1
991-2201	Center-Lok II pad holder - right hand thread (black)	1
991-2206	Center-Lok 3 pad holder	1

- Pad Holders

Click to enlarge

#	Part	Description	Notes
1	991-2214	Center-Lok II pad holder - left hand thread (red)
2a	991-2201	Center-Lok II pad holder - right hand thread (black)	(Pad driver side female, Floor side male)
2b	991-8577	Pad retainer	(Pad driver side male, Floor side female)
3a	991-2202	Big mouth pad holder set (blue)	(includes 3 screws)
3b	991-2205	Deep lock ring and pad grip ring
4	991-2203	Big mouth pad holder male thread portion
5	991-2206	Center-Lok 3 pad holder	(includes 3 screws)
6	996-0372	Big mouth pad holder (left hand thread)
7	N/A	Not available
8	991-2209	Split retainer - pad holder ring (OBSOLETE)
9	N/A	Not available	(replaced by #3 991-2202)
10	991-2211	Center lock pad holding cup (male) (yellow) (OBSOLETE)

- Pads - 16 inch

Click to enlarge

#	Part	Description
01	255-1640	16 inch aqua plus burnishing pad (pkg of 5)
02	255-1635	16 inch Armadillo concrete scrubbing pad (pkg of 5)
03	255-1664	16 inch Blue ace pad (pkg of 5)
04	255-1642	16 inch Blue Jay burnishing pad (pkg of 5)
05	255-1612	16 inch Cure white pad (pkg of 5)
06	255-1677	16 inch Diamondback extreme stripping pad (pkg of 5)
07	255-1638	16 inch EHD Extra Heavy Duty Concrete Leveling Pad (pkg of 2
08	255-1621	16 inch gorilla lite burnishing pad (pkg of 5)
09	255-1650	16 inch gorilla spray buff/polish/burnish pad (pkg of 5)
10	255-1665	16 inch Heat concrete bonding pad (pkg of 5)
11	255-1630	16 inch jaguar burnishing pad (pkg of 5)
12	255-1687	16 inch Melamine Mela-Kleen pad (pkg of 2)
13	255-1690	16 inch premium black stripping pad (pkg of 5)
14	255-1670	16 inch premium blue cleaning pad (pkg of 5)
15	255-1692	16 inch premium brown stripping pad (pkg of 5)
16	255-1680	16 inch premium green scrubbing pad (pkg of 5)
17	255-1660	16 inch premium red scrubbing pad (pkg of 5)
18	255-1652	16 inch premium tan polishing pad (pkg of 5)
19	255-1620	16 inch premium white polishing pad (pkg of 5)
20	255-1611	16 inch superspeed rubberized pad (pkg of 5)
21	255-1695	16 inch razorback stripping pad (pkg of 5)
22	255-1647	16 inch Redwood maroon floor prep pad (pkg of 10)
23	255-1655	16 inch Ruff non-abrasive brush pad (pkg of 2)
24	255-1623	16 inch sand screen driver pad (pkg of 2)
25	255-0132	16 inch Professional sand screen 100 grit (pkg of 10)
26	255-0133	16 inch Professional sand screen 120 grit (pkg of 10)
27	255-0134	16 inch Professional sand screen 150 grit (pkg of 10)
28	255-0135	16 inch Professional sand screen 180 grit (pkg of 10)
29	255-0136	16 inch Professional sand screen 220 grit (pkg of 10)
30	255-0137	16 inch Professional sand screen 400 grit (pkg of 10)
31	255-0130	16 inch Professional sand screen 60 grit (pkg of 10)
32	255-0131	16 inch Professional sand screen 80 grit (pkg of 10)
33	255-0217	16 inch Superscreen sand screen 100 grit (pkg of 10)
34	255-0218	16 inch Superscreen sand screen 120 grit (pkg of 10)
35	255-0219	16 inch Superscreen sand screen 150 grit (pkg of 10)
36	255-0220	16 inch Superscreen sand screen 180 grit (pkg of 10)
37	255-0221	16 inch Superscreen sand screen 220 grit (pkg of 10)
38	255-0222	16 inch Superscreen sand screen 400 grit (pkg of 10)
39	255-0215	16 inch Superscreen sand screen 60 grit (pkg of 10)
40	255-0216	16 inch Superscreen sand screen 80 grit (pkg of 10)
41	255-1624	16 inch Tiger carpet bonnet (pkg of 2)
42	255-9563	16 inch Diamond by Gorilla 11000 Grit (pkg of 2)
43	255-9560	16 inch Diamond by Gorilla 1500 Grit (pkg of 2)
44	255-9557	16 inch Diamond by Gorilla 200 Grit (pkg of 2)
45	255-9561	16 inch Diamond by Gorilla 3000 Grit (pkg of 2)
46	255-9558	16 inch Diamond by Gorilla 400 Grit (pkg of 2)
47	255-9559	16 inch Diamond by Gorilla 800 Grit (pkg of 2)
48	255-9562	16 inch Diamond by Gorilla 8000 Grit (pkg of 2)
49	255-9641	16 inch Diamond starter pack (1 of each grit)
50	255-1682	16 inch Turbostrip segmented rotary pad (pkg of 4)(OBSOLETE)
51	255-1615	16 inch Duala clean and shine pad - low speed (pkg of 5)
52	255-1616	16 inch 2001 Duala clean and shine pad - high speed (pkg 5)

- Pads - 20 inch

Click to enlarge

#	Part	Description
01	255-2040	20 inch aqua plus burnishing pad (pkg of 5)
02	255-2035	20 inch Armadillo concrete scrubbing pad (pkg 5) (OBSOLETE)
03	255-2064	20 inch Blue ace pad (pkg of 5)
04	255-2042	20 inch Blue Jay burnishing pad (pkg of 5)
05	255-2012	20 inch super white pad (pkg of 5)
06	255-2077	20 inch Diamondback extreme stripping pad (pkg of 5)
07	255-2038	20 inch EHD Extra Heavy Duty Concrete Leveling Pad (pkg of 2
08	255-2021	20 inch gorilla lite burnishing pad (pkg of 5)
09	255-2050	20 inch gorilla spray buff/polish/burnish pad (pkg of 5)
10	255-2065	20 inch Heat concrete bonding pad (pkg of 5)
11	255-2030	20 inch jaguar burnishing pad (pkg of 5)
12	255-2067	20 inch Laminated 2001 Gorilla polish pad (pkg of 5)
13	255-2087	20 inch Melamine Mela-Kleen pad (pkg of 2)
14	255-2068	20 inch Microclean daily cleaning pad (pkg of 2)
15	255-2069	20 inch Micropolish polishing and burnishing pad (pkg of 2)
16	255-2090	20 inch premium black stripping pad (pkg of 5)
17	255-2070	20 inch premium blue cleaning pad (pkg of 5)
18	255-2092	20 inch premium brown stripping pad (pkg of 5)
19	255-2080	20 inch premium green scrubbing pad (pkg of 5)
20	255-2060	20 inch premium red scrubbing pad (pkg of 5)
21	255-2052	20 inch premium tan polishing pad (pkg of 5)
22	255-2020	20 inch premium white polishing pad (pkg of 5)
23	255-2011	20 inch superspeed rubberized pad (pkg of 5)
24	255-2095	20 inch razorback stripping pad (pkg of 5)
25	255-2047	20 inch Redwood maroon floor prep pad (pkg of 10)
26	255-2055	20 inch Ruff non-abrasive brush pad (pkg of 2)
27	255-2023	20 inch sand screen driver pad (pkg of 2)
28	255-0157	20 inch Professional sand screen 100 grit (pkg of 10)
29	255-0021	20 inch Professional sand screen 120 grit (pkg of 10)
30	255-0158	20 inch Professional sand screen 150 grit (pkg of 10)
31	255-0159	20 inch Professional sand screen 180 grit (pkg of 10)
32	255-0160	20 inch Professional sand screen 220 grit (pkg of 10)
33	255-0161	20 inch Professional sand screen 400 grit (pkg of 10)
34	255-0030	20 inch Professional sand screen 60 grit (pkg of 10)
35	255-0020	20 inch Professional sand screen 80 grit (pkg of 10)
36	255-0249	20 inch Superscreen sand screen 100 grit (pkg of 10)
37	255-0250	20 inch Superscreen sand screen 120 grit (pkg of 10)
38	255-0251	20 inch Superscreen sand screen 150 grit (pkg of 10)
39	255-0252	20 inch Superscreen sand screen 180 grit (pkg of 10)
40	255-0253	20 inch Superscreen sand screen 220 grit (pkg10) (OBSOLETE)
41	255-0254	20 inch Superscreen sand screen 400 grit (pkg of 10)
42	255-0247	20 inch Superscreen sand screen 60 grit (pkg of 10)
43	255-0248	20 inch Superscreen sand screen 80 grit (pkg of 10)
45	255-9591	20 inch Diamond by Gorilla 11000 Grit (pkg of 2)
46	255-9588	20 inch Diamond by Gorilla 1500 Grit (pkg of 2)
47	255-9585	20 inch Diamond by Gorilla 200 Grit (pkg of 2)
48	255-9589	20 inch Diamond by Gorilla 3000 Grit (pkg of 2)
49	255-9586	20 inch Diamond by Gorilla 400 Grit (pkg of 2)
50	255-9587	20 inch Diamond by Gorilla 800 Grit (pkg of 2)
51	255-9590	20 inch Diamond by Gorilla 8000 Grit (pkg of 2)
52	255-9645	20 inch Diamond starter pack (1 of each grit)
53	255-2082	20 inch Turbostrip segmented rotary pad (OBSOLETE)
54	255-2015	20 inch Duala clean and shine pad - low speed (pkg of 5)
55	255-2016	20in 2001 Duala clean& shine pad-high speed(pkg 5) (OBSOLETE

Backup Alarm Assembly

Click to enlarge

#	Part	Description	Req	Notes
0a	275-2544	Backup alarm kit (gray) (Tennant Industrial)	1	(includes 1-18, 19a,20-21) (after SN 004999)
0b	275-8568	ALARM KIT, BACKUP / A/V, CI [7300] (Tennant Industrial)	1	(includes 1-18, 19b, 20-24) (before SN 005000)
1	275-2542	Backup alarm assembly	1
2	999-0502	Bolt M6-1 x 20mm hex head full thread zinc	2
3	999-6694	Nut M6-1 hex serrated flange stainless steel	2
4	999-0006	Washer 3/16 flat zinc plated	2
5a	275-8570	LIGHT, SPOT, 36VDC, 60WATT, RWK 72173 (Tennant Industrial)	1	(includes 5b)
5b	275-4235	HEADLIGHT, 36VDC, 60WATT 1.7A (Tennant Industrial)	1
6	999-0114	Washer 1/2 SAE flat	1
7	999-0815	Screw 1/2-13 x 3/4 hex hot dipped galvanized	1
8	275-8572	GUARD, LIGHT (Tennant Industrial)	1
9	275-8573	FLASHER, 12/48VDC 5A [6309/12-48V] (Tennant Industrial)	1
10	275-0417	Screw M6-1 x 50 hex head	2
11	999-0469	Nut M6-1 nylon insert lock zinc plated	2
12	999-0016	Washer 1/4 flat plain finish	2
13	175-2265	36V 5amp relay	1
14	175-4401	GROMMET, RBR, 0.38ID, F/0.5H, .12 MATL (Tennant Industrial)	1
15	175-5421	P clamp	1
16	999-0089	Washer #10 internal star lock zinc plated	2
17	N/A	Not available	1	(spring)
18	275-8571	HARNESS, ALARM, BACKUP, SHRD [7300] (Tennant Industrial)	1
19a	275-2545	Iron mounting bracket (gray) (Tennant Industrial)	1	(after SN 004999)
19b	275-8574	BRACKET, MTG (Tennant Industrial)	1	(before SN 005000)
20	999-0006	Washer 3/16 flat zinc plated	5
21	999-1352	Screw 10-14 x 3/4 phillips pan head plastic thread rolling	6
22	275-8575	SWITCH KIT, MICRO (Tennant Industrial)	1	(before SN 001706)
23	275-8576	HARNESS, JUMPER, REVERSE SWITCH (Tennant Industrial)	1	(before SN 001706)
24	175-2162	Nylon wire tie	4	(before SN 001706)

Battery Assembly

Click to enlarge

#	Part	Description	Req	Notes
0a	275-8751	BATTERY KIT, WET, 36VDC 0750AH, CI (Tennant Industrial)	1	(includes 1a, 2, 3a, 4a, 5-7, 8a) (750AH wet)
0b	675-9304	BATTERY KIT, 36VDC 0600AH, SEALED (OBSOLETE)	1	(includes 1b, 2, 3b, 4b, 5-7, 8a) (600AH after SN 004999)
0c	675-9311	BATTERY KIT, 36VDC 0600AH, SEALED (OBSOLETE)	1	(includes 1b, 2, 3c, 4c, 5-7, 8b) (600AH before SN 005000)
0d	275-8745	BATTERY KIT, WET, 36VDC 0500AH, CI (Tennant Industrial)	1	(includes 1a, 2, 3a, 4a, 5-7, 8a) (500AH wet)
0e	675-9190	BATTERY KIT, WET, 36VDC 0380AH, CI (Tennant Industrial)	1	(includes 1c, 2, 3d, 6-7, 8b)
1a	175-5019	36V 750Ah wet battery (Tennant Industrial)	1	(includes 2) (750AH wet)
1b	175-5018	36V 600Ah sealed battery (Tennant Industrial)	1	(includes 2) (600AH wet after SN 004999)
1c	675-9151	BATTERY, WET, 36VDC 0380AH [TR] (Tennant Industrial)	1	(includes 2) (380AH wet)
2	275-4284	CONNECTOR, 350A, GRAY [ANDERSON] (Tennant Industrial)	1
3a	275-2627	Right hand battery spacer (gray) (Tennant Industrial)	1	(750AH wet, 500AH wet)
3b	575-8262	SPACER, BATTERY, RH, IRON GRAY (Tennant Industrial)	1	(600AH wet after SN 004999)
3c	275-8749	SPACER, BATTERY, RH (Tennant Industrial)	1	(600AH wet before SN 005000)
3d	575-3268	SPACER, BATTERY, STL, IRON GRAY (Tennant Industrial)	2	(380AH wet)
4a	275-2628	Left hand battery spacer (gray) (Tennant Industrial)	1	(750AH wet, 500AH wet)
4b	575-8263	SPACER, BATTERY, LH, IRON GRAY (Tennant Industrial)	1	(600AH wet after SN 004999)
4c	275-8750	SPACER, BATTERY, LH (Tennant Industrial)	1	(600AH wet before SN 005000)
5	275-2629	Rear hand battery spacer (gray) (Tennant Industrial)	1	(750AH wet, 600AH wet, 500AH wet)
6	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	6	(750AH wet, 600AH wet, 500AH wet)
7	999-0355	175-2249	6
8a	999-0665	Nut M8-1.25 flange lock	6	(500AH wet, 600AH wet after SN 004999)
8b	999-0496	Nut M8-1.25 nylon insert lock stainless steel	6	(600AH wet before SN 005000) (qty 4 for 380AH wet)

Battery Charger Assembly

Click to enlarge

#	Part	Description	Req	Notes
1a	275-8755	CHARGER, 36VDC 120A TRI-VAC 1PH 60HZ (Tennant Industrial)	1	(includes 2)
1b	675-8990	CHARGER, 36VDC/80A, 200-240VAC 3PH (Tennant Industrial)	1	(includes 2)
1c	275-8754	CHARGER, 36VDC 120A TRI-VAC 3PH 60HZ (Tennant Industrial)	1	(includes 2)
1d	275-8757	Charger 36V 93A (Tennant Industrial) (OBSOLETE)	1	(includes 2)
1e	275-8758	Charger 36V 93A (Tennant Industrial) (OBSOLETE)	1	(includes 2)
1f	275-8756	36V charger (Tennant Industrial) (OBSOLETE)	1	(includes 2)
2	275-4284	CONNECTOR, 350A, GRAY [ANDERSON] (Tennant Industrial)	1

Battery Forklift Assembly

Click to enlarge

#	Part	Description	Req	Notes
0	275-8743	LIFT KIT, FORK, BATTERY, CI (Tennant Industrial)	1	(includes 1-3)
1	275-2626	Battery cradle weldment (gray) (Tennant Industrial)	1
2	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	4
3	999-0496	Nut M8-1.25 nylon insert lock stainless steel	4

Battery Rollout Assembly

Click to enlarge

#	Part	Description	Req	Notes
0	275-8733	BATTERY KIT, R/O, CI (Tennant Industrial)	1	(includes 1-20)
1	275-8734	CABLE, GLV .19D 036.5L .38EYE / HOOK (Tennant Industrial)	1
2	275-2622	Battery channel (gray) (Tennant Industrial)	2
3	275-0003	Bearing	20
4	175-9662	Screw M6-1 x 35mm hex head stainless steel	20
5	999-0497	Nut M6-1 nylon insert lock stainless steel	20
6	275-2623	Battery angle (gray) (Tennant Industrial)	4
7	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	6
8	999-0496	Nut M8-1.25 nylon insert lock stainless steel	6
9	275-8737	HARNESS, BATTERY, R/O [7300/8300] (Tennant Industrial)	1
10	275-2624	Battery bar weldment (Tennant Industrial)	1
11	275-2625	Iron stop weldment (gray) (Tennant Industrial)	1	(after SN 001792)
12	275-8740	SWITCH, LIMIT, NO (Tennant Industrial)	1	(after SN 001792)
13	175-6939	Screw M5 x 16mm stainless steel	4	(after SN 001792)
14	999-0998	Washer #10 flat stainless steel	4	(after SN 001792)
15	999-0740	Nut M5-.8 hex stainless steel	4	(after SN 001792)
16	275-8741	BOLT, SHLD, .38D X 0.38, .31-18 (Tennant Industrial)	1	(after SN 001792)
17	999-0549	Washer 5/16 x 3/4 SAE flat stainless steel	1	(after SN 001792)
18	999-0278	Nut 5/16-18 nylon insert lock jam zinc plated	1	(after SN 001792)
19	275-8742	LATCH, HANDLE (Tennant Industrial)	1	(after SN 001792)
20	999-0355	175-2249	2	(after SN 001792)
21	999-0355	175-2249	5	(before SN 001793)
22	999-0954	Nut M4-.7 nylon insert lock stainless steel	5	(before SN 001793)
23	999-0786	Screw M8-1.25 x 35mm hex head stainless steel	1	(before SN 001793)
24	175-2079	Screw M4-.07 x 35mm pan head stainless steel	2	(before SN 001793)
25	275-5093	LOCK ASSY KIT, BATTERY, R/O, REPLMT (Tennant Industrial)	1	(before SN 001793)
26	275-5093	LOCK ASSY KIT, BATTERY, R/O, REPLMT (Tennant Industrial)	1	(before SN 001793)

Battery Tray Assembly

Click to enlarge

#	Part	Description	Req	Notes	Availability
1	275-8747	TRAY WLDT, BATTERY, 500AH, 750AH (Tennant Industrial)	1

Brake Pedal Assembly

Click to enlarge

#	Part	Description	Req
1	175-0627	CABLE, PULL, 049.0L, .3CLEVIS /.3CLEVIS (Tennant Industrial	1
2	175-3351	Clevis pin	1
3	175-6176	Cotter pin	1
4	275-7957	Iron lever weldment (Tennant Industrial)	1
5	175-3354	Thrust washer	2
6	175-2249	Sleeve	1
7	999-0787	Bolt M8-1.25 x 40mm hex head full thread stainless steel	1
8	999-0496	Nut M8-1.25 nylon insert lock stainless steel	1
9	999-0355	175-2249	2
10	175-0629	SPRING, EXTN, 1.00OD 0.11WIR 05.5L (Tennant Industrial)	1
11	175-3279	Pedal pad	1
12	175-2366	Rubber grommet	1
13	175-0630	PLATE, STOP (Tennant Industrial)	1
14	999-0502	Bolt M6-1 x 20mm hex head full thread zinc	2
15	999-0123	Washer 1/4 SAE flat zinc plated	2
16	275-7958	Iron parking brake pedal (Tennant Industrial)	1
17	175-0632	Sleeve bushing	1
18	175-0633	Spring	1
19	175-0634	Bolt M8-1 1/4 x 35mm hex head	1
20	999-0471	Nut M8-1.25 nylon insert lock zinc plated	1
21	999-0549	Washer 5/16 x 3/4 SAE flat stainless steel	1

Brush Assembly - MaxPro 1000

Click to enlarge

#	Part	Description	Req	Notes
1a	275-8279	BRUSH, SCB, 39L, 20SR, PYP, SPL (Tennant Industrial)	2
1b	275-8280	BRUSH, SCB, 39L, 20SR, SAB, SPL (Tennant Industrial)	2
1c	175-2978	BRUSH, SCB, 39L, 20SR, NYL, SPL (Tennant Industrial)	2
2a	175-0504	Scrub brush disk assembly 20 D Nylon (Tennant Industrial)	2	(includes 3-7)
2b	996-1019	Polypropelene scrubbing brush ( Tennant Industrial)	2	(includes 3-7)
2c	996-1624	19 inch heavy grit stripping brush - 80 grit	2	(includes 3-7)
3	175-2335	Brush adaptor	1
4	175-2071	Brush retaining spring	1
5	175-2072	Spring retainer bracket	1
6	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	1
7	175-0505	Screw M6-1 x 35mm pan head stainless steel	3
8a	255-2020	20 inch premium white polishing pad (pkg of 5)	2
8b	175-0510	Buff pad 20d red	2
8c	175-0511	20in scrub pad (blue)	2
8d	255-2092	20 inch premium brown stripping pad (pkg of 5)	2
8e	475-3466	20 inch stripping pad (each)	2
8f	475-3477	20 inch surface prep pad (maroon)(each)	2
9	175-0513	DRIVER ASSY, PAD, 20.0D (Tennant Industrial)	2	(includes 10-18)
10	175-0514	DISK, DRIVER, PAD, W/ FACE, 20.0D (Tennant Industrial)	1
11	175-2335	Brush adaptor	1
12	175-2071	Brush retaining spring	1
13	175-2072	Spring retainer bracket	1
14	175-0515	Centering device (OBSOLETE)	1
15	175-2079	Screw M4-.07 x 35mm pan head stainless steel	3
16	999-0266	Washer #8 SAE flat stainless steel	3
17	175-0505	Screw M6-1 x 35mm pan head stainless steel	3
18	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	1
19	275-1971	Polypropylene side broom (Tennant Industrial)	1	(option)

Brush Assembly - MaxPro 1200

Click to enlarge

#	Part	Description	Req	Notes
1a	275-8282	BRUSH, SCB, 47L, 20SR, PYP, SPL (Tennant Industrial)	2
1b	275-8283	BRUSH, SCB, 47L, 20SR, SAB, SPL (Tennant Industrial)	2
1c	275-8284	BRUSH, SCB, 47L, 20SR, NYL, SPL (Tennant Industrial)	2
2a	275-6002	16 inch super abrasive scrubbing brush	3	(includes 3-7)
2b	996-1034	16 inch nylon scrubbing brush	3	(includes 3-7)
2c	996-1037	16 inch polypropelene scrubbing brush	3	(includes 3-7)
3	275-4936	Brush hub 3 hole	1
4	175-2071	Brush retaining spring	1
5	175-2072	Spring retainer bracket	1
6	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	1
7	175-0505	Screw M6-1 x 35mm pan head stainless steel	3
8a	255-1692	16 inch premium brown stripping pad (pkg of 5)	3
8b	175-0518	16 inch scrubbing pad (blue)(each)	3
8c	175-0519	16 inch buffing pad (red)(each)	3
8d	255-1620	16 inch premium white polishing pad (pkg of 5)	3
8e	175-4909	Black strip head pad	3
8f	255-1647	16 inch Redwood maroon floor prep pad (pkg of 10)	3
9	175-2405	Pad driver assembly	3	(includes 10-18)
10	996-1389	Pad driver	1
11	175-2335	Brush adaptor	1
12	175-2071	Brush retaining spring	1
13	175-2072	Spring retainer bracket	1
14	275-6264	Pad centering device	1
15	175-2079	Screw M4-.07 x 35mm pan head stainless steel	3
16	999-0266	Washer #8 SAE flat stainless steel	3
17	175-0505	Screw M6-1 x 35mm pan head stainless steel	3
18	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	1
19	275-1971	Polypropylene side broom (Tennant Industrial)	1	(option)

Brush Motor and Pivot Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	275-0833	Cable	1
2	275-0154	SPRING, EXTN, 1.10OD 0.15WIR 03.2L (Tennant Industrial)	1
3a	275-7978	Iron motor mounting bracket (gray) (Tennant Industrial)	2	(right)
3b	275-2550	Motor mounting bracket (gray) (Tennant Industrial)	2	(left)
4	275-0157	SPRING, DSL, 1.00OD 0.50ID 1.25L (Tennant Industrial)	2
5a	275-7979	Iron motor mounting bracket (gray) (Tennant Industrial)	1	(right)
5b	275-2551	Motor mounting bracket (gray) (Tennant Industrial)	1	(left)
6	575-8054	BRACKET, MTG, MOTOR [1000] (Tennant Industrial)	1	(right)
7	999-0032	Washer 3/8 USS flat plain finish	2
8a	275-0108	36V sidebrush motor	1	(includes 8c-8f) (right)
8b	275-4683	Electric motor 36VDC .08hp	1	(includes 8c-8f) (left)
8c	275-0109	Carbon brush assembly	1
8d	175-9270	Brush cap	2
8e	175-9271	Brush holder	2
8f	175-9272	Clip	2
9	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	4
10	999-1312	Screw M6-1 x 20mm hex head stainless steel	4
11	275-8358	GUARD, BRUSH, SIDE, 10.5D 3.8H (Tennant Industrial)	1
12	275-7980	Iron plate (gray) (Tennant Industrial)	1
13	275-8360	HUB, ADAPTER, BRUSH, 1.7D 0.6B 1.4L (Tennant Industrial)	1	(before SN 002347)
14	275-8361	PLATE, ADAPTER, BRUSH (Tennant Industrial)	1	(before SN 002347)
15	175-2106	Cotter hair pin	1
16	275-1660	PIN, ROLL, .250D X 2.00L, .250/.256 (Tennant Industrial)	1
17	999-0665	Nut M8-1.25 flange lock	1
18	999-0519	Nut M12-1.75 nylon insert lock stainless steel	1
19	999-0024	Washer 5/16 flat stainless steel	1
20	175-3354	Thrust washer	1
21	999-0581	Bolt M8-1.25 x 25mm hex head full thread zinc	3
22	275-8362	PIN, CLEVIS, 0.37D X 3.25L (Tennant Industrial)	1
23	999-1280	Screw M12-1.75 x 80mm hex	1
24	175-0550	Sleeve	2
25	999-0471	Nut M8-1.25 nylon insert lock zinc plated	1
26	175-9085	PIN, CLEVIS, 0.37D X 0.62L (Tennant Industrial)	1
27	999-0355	175-2249	1
28	175-6176	Cotter pin	2
29	999-0114	Washer 1/2 SAE flat	4
30	275-0025	Screw M10-1.5 x 25 hex head 8.8	2	(right)
31	275-7983	Brush adapter plate (Tennant Industrial)	1	(after SN 002346)
32	275-7984	Washer (Tennant Industrial) (OBSOLETE)	1	(after SN 002346)
N/S	275-0025	Screw M10-1.5 x 25 hex head 8.8	1	(left)

Circuit Board Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	275-2464	Circuitboard assembly (Tennant Industrial)	1	(includes 2)
2	175-0872	Fuse .20A slo-blo	2
3	175-0873	PIN, PRONG, CIRCUITBOARD ASSY (Tennant Industrial)	7
4a	175-0874	BOX, CIRCUITBOARD (Tennant Industrial) (OBSOLETE)	1	(before SN 005000)
4b	275-2466	Circuitboard box (iron gray) (Tennant Industrial)	1	(after SN 004999)
5	175-0875	GASKET, NEO, .19, 07.60W 10.25L, ADH (Tennant Industrial)	1
6a	175-0876	COVER (Tennant Industrial)	1	(before SN 005000)
6b	275-2467	Cover (iron gray) (Tennant Industrial)	1	(after SN 004999)
7	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	6
8	999-0016	Washer 1/4 flat plain finish	4
9	175-0838	GROMMET, RBR, 1.00ID, F/ SL, .19 MATL (Tennant Industrial)	1
10	175-0841	PLUG, HOLE, BLK PYU (Tennant Industrial)	1
11	175-0877	TAPE, FOAM (Tennant Industrial)	1

Control Box Circuit Breaker Assembly

Click to enlarge

#	Part	Description	Req	Notes
1a	N/A	Not available	1	(controlbox plate) (before SN 005000)
1b	275-9357	Control box plate (iron gray) (Tennant Industrial)	1	(after SN 004999)
2	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	3
3	999-0024	Washer 5/16 flat stainless steel	3
4	999-0471	Nut M8-1.25 nylon insert lock zinc plated	1
5	175-0835	GASKET, NEO, .12, 16.93W 20.00L, ADH (Tennant Industrial)	1
6	175-0836	COVER, CONTROLBOX (Tennant Industrial)	1
7	175-0837	Bolt M5-.8 x 16mm hex head	8
8	999-0998	Washer #10 flat stainless steel	8
9	175-0838	GROMMET, RBR, 1.00ID, F/ SL, .19 MATL (Tennant Industrial)	2
10	175-0839	Rubber grommet 1/2 ID	4
11	175-0840	Rubber grommet	2
12	175-0841	PLUG, HOLE, BLK PYU (Tennant Industrial)	1
13a	175-2337	20amp circuit breaker	2	(before SN 001706)
13b	175-2151	30amp circuit breaker	2	(after SN 001705)
14	175-0842	15amp circuit breaker	2
15	175-0844	CIRCUITBREAKER, 50.0A (Tennant Industrial)	2	(before SN 001706)
16	991-1631	25amp circuit breaker	1
17	275-2529	2.5amp circuitbreaker	2
18	175-0844	CIRCUITBREAKER, 50.0A (Tennant Industrial)	1	(before SN 001706) (center brush option)
19	175-0843	40amp circuitbreaker	1	(power steering option)
20	175-0842	15amp circuit breaker	1	(power wand / side sweep option)
21a	275-8531	CIRCUITBREAKER, 40.0A (Tennant Industrial)	3	(after SN 001705) (Max Pro 1200 disk) (Max Pro 1000 disk with standard motor)
21b	275-8532	CIRCUITBREAKER, 45.0A (Tennant Industrial)	2	(after SN 001705) (Max Pro 1000 disk with heavy duty motor) (Max Pro 1000 cylindrical) (Max Pro 1200 cylindrical)
22	275-8534	BOOT, CIRCUITBREAKER (Tennant Industrial)	1	(after SN 001705)
23	999-0463	Screw 6-32 x 3/8 pan head slotted zinc plated	6	(after SN 001705)

Control Box Contactor Assembly - After SN 001705

Click to enlarge

#	Part	Description	Req	Notes
1	175-0850	CONTROLLER, MOTOR, 36VDC 275A [CURT1204] (Tennant Industria	1
2	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	4
3	999-0016	Washer 1/4 flat plain finish	4
4	999-6694	Nut M6-1 hex serrated flange stainless steel	4
5	175-0847	FUSE, 150A, 0.88 2.4L [SLO-BLO] (Tennant Industrial)	1
6	175-3226	Insulated stand off	1
7	175-3227	Threaded rod	1
8	275-8539	CONTACTOR, 36VDC, 200A, SPST (Tennant Industrial)	1
9	175-0598	Screw 5mm-.8 x 6 pan head	6
10	999-1026	Washer #10 internal lock stainless steel	6
11	275-8540	CONTACTOR, 36VDC, NO (Tennant Industrial)	1
12	999-1083	Washer #8 internal star lock stainless steel	4
13	999-1283	Screw M4-.7 x 6mm pan head phillips zinc	4
14a	275-8542	BRACKET, MTG, CONTROLLER, SGL (Tennant Industrial)	1	(between SN 001706 and SN 004999)
14b	275-2530	Controller mounting bracket (gray) (Tennant Industrial)	1	(after SN 004999)
15	175-4963	Bolt M6-1 x 20mm hex head	4
16	999-0024	Washer 5/16 flat stainless steel	4
17	275-8543	CONTACTOR, 36VDC, 200A, DPDT (Tennant Industrial)	1
18a	275-8544	BRACKET, MTG, RELAY (Tennant Industrial)	1	(between SN 001706 and SN 004999)
18b	275-2531	Relay mounting bracket (gray) (Tennant Industrial)	1	(after SN 004999)
19	175-2373	36V contactor	2
20	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	4
21	999-0016	Washer 1/4 flat plain finish	4
22	999-0469	Nut M6-1 nylon insert lock zinc plated	4
23	175-0849	Nut 5/16-24 hex	4
24	999-0406	Washer 5/16 internal star lock zinc plated	4
25	999-0549	Washer 5/16 x 3/4 SAE flat stainless steel	4
26	999-0460	Nut 10-32 hex	4
27	999-0006	Washer 3/16 flat zinc plated	4
28	999-0089	Washer #10 internal star lock zinc plated	4
29	175-0851	RESISTOR, 040.000HM, 0040WATT (Tennant Industrial)	1
30	175-0852	Bolt 5mm-.8 x 12 hex head	2
31	999-0998	Washer #10 flat stainless steel	2
32	175-2894	Nut M5-.8 hex nylon locking	2
33	999-0123	Washer 1/4 SAE flat zinc plated	1
34	999-0190	Nut 1/4-20 hex plain finish	1
35	999-0238	Washer 1/4 internal star lock zinc plated	1
36	275-6131	Nut M8 x 1.25 hex coupling (Tennant Industrial)	1
37	275-0284	HARNESS, SWITCH, KEY, DIODE [515] (Tennant Industrial)	2
38	175-2216	Diode plug	2

Control Box Contactor Assembly - Before SN 001706

Click to enlarge

#	Part	Description	Req
1	175-0845	RELAY, 36VDC, 100A, SPDT NO [CABELFORM] (Tennant Industrial	2
2	999-0789	Screw M4-.7 x 20mm hex head	8
3	175-2894	Nut M5-.8 hex nylon locking	2
4	275-4173	CONTACTOR, 36VDC [SPNO] (Tennant Industrial)	2
5	175-3226	Insulated stand off	4
6	175-0846	BUSBAR, FUSE, .6 0.6W 0.8H 2.0L (Tennant Industrial)	2
7	175-0847	FUSE, 150A, 0.88 2.4L [SLO-BLO] (Tennant Industrial)	1
8	999-0123	Washer 1/4 SAE flat zinc plated	4
9	999-0361	Bolt 1/4-20 x 3/8 hex head grade 5 zinc	6
10	999-0190	Nut 1/4-20 hex plain finish	2
11	175-3227	Threaded rod	2
12	175-0848	BUSBAR, .06 0.6W 2.5L 2/.28H (Tennant Industrial)	1
13	175-2373	36V contactor	2
14	999-0016	Washer 1/4 flat plain finish	9
15	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	6
16	999-0469	Nut M6-1 nylon insert lock zinc plated	4
17	999-0089	Washer #10 internal star lock zinc plated	4
18	999-0006	Washer 3/16 flat zinc plated	4
19	999-0460	Nut 10-32 hex	4
20	999-0406	Washer 5/16 internal star lock zinc plated	4
21	999-0549	Washer 5/16 x 3/4 SAE flat stainless steel	4
22	175-0849	Nut 5/16-24 hex	4
23	175-0850	CONTROLLER, MOTOR, 36VDC 275A [CURT1204] (Tennant Industria	1
24	999-6694	Nut M6-1 hex serrated flange stainless steel	4
25	999-0238	Washer 1/4 internal star lock zinc plated	9
26	175-0851	RESISTOR, 040.000HM, 0040WATT (Tennant Industrial)	1
27	999-0998	Washer #10 flat stainless steel	2
28	175-0852	Bolt 5mm-.8 x 12 hex head	2

Control Box Wires Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	175-0862	TIE, CABLE, NYL, 28.3L .50W 8.0 MAX D (Tennant Industrial)	4
2	175-0863	CABLE, 04GA 32.0L BLK .34RING /.34RING (Tennant Industrial)	1	(before SN 001706)
3	175-0864	CABLE, 02GA 27.0L BLK .34RING /.34RING (Tennant Industrial)	2
4	175-0865	CABLE, 04GA 09.0L BLK .28RING /.34RING (Tennant Industrial)	4	(before SN 001706)
5	175-0866	CABLE, 06GA 11.0L BLK .28RING /.34RING (Tennant Industrial)	1	(before SN 001706)
6	999-0406	Washer 5/16 internal star lock zinc plated	4
7	175-0867	WASHER, FLAT, 1.50B 3.50D .18, PL (Tennant Industrial)	4
8	175-0849	Nut 5/16-24 hex	4
9	175-0848	BUSBAR, .06 0.6W 2.5L 2/.28H (Tennant Industrial)	2	(before SN 001706)
10	999-1026	Washer #10 internal lock stainless steel	4
11	999-0006	Washer 3/16 flat zinc plated	4
12	999-0460	Nut 10-32 hex	4
13	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	4
14	999-0471	Nut M8-1.25 nylon insert lock zinc plated	4
15	175-0869	HARNESS, BATTERY, CONNECTING (Tennant Industrial)	1
16	175-0870	SLEEVE, NYL, 1.06ID 14.0L (Tennant Industrial)	1
17	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	2
18	175-0758	Bolt M6-1 x 40mm hex head stainless steel	2
19	999-0238	Washer 1/4 internal star lock zinc plated	2	(before SN 001706)
20	999-0579	Nut M8-1.25 hex coarse thread zinc	4
21	999-0123	Washer 1/4 SAE flat zinc plated	4
22	999-0201	Washer 3/8 internal star lock	2
23	999-0439	Nut M6-1 hex coarse thread	2	(before SN 001706)
24	999-0016	Washer 1/4 flat plain finish	4	(before SN 001706)
N/S	275-8541	CABLE, 02GA 10.0L BLK .34RING /.34RING (Tennant Industrial)	4	(after SN 001705)
N/S	175-2120	6 gauge black wire jumper cable	1	(after SN 001705)

Debris Tray Assembly - Cylindrical - Max Pro 1000

Click to enlarge

#	Part	Description	Req
1	275-8662	TRAY, DEBRIS, 40.0L, W/ HOLE (Tennant Industrial)	1
2	999-1312	Screw M6-1 x 20mm hex head stainless steel	5
3	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	5
4	999-0497	Nut M6-1 nylon insert lock stainless steel	5
5	275-2578	Iron angle (gray) (Tennant Industrial)	1

Debris Tray Assembly - Cylindrical - Max Pro 1200

Click to enlarge

#	Part	Description	Req
1	275-8671	TRAY, DEBRIS, 48.0L, W/ HOLE (Tennant Industrial)	1
2	999-1312	Screw M6-1 x 20mm hex head stainless steel	5
3	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	5
4	999-0497	Nut M6-1 nylon insert lock stainless steel	5
5	275-2584	Iron angle (gray) (Tennant Industrial)	1

Decal Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	175-0880	LABEL SET, OPERTNL [7300/8300] (Tennant Industrial)	1
2	175-0881	LABEL SET, INFO/HZRD [7300/8300] (Tennant Industrial)	1
3	275-7938	Tank decal (Tennant Industrial)	2
4	175-0883	LABEL, SQGE (Tennant Industrial)	1
5a	275-2448	Logo decal - ec-H2O (Tennant Industrial)	2	(ec-H2O)
5b	275-2450	Logo decal - FaST	2	(FaST)
5c	275-2449	Logo decal (Tennant Industrial)	2	(ES)

Detergent Metering Assembly

Click to enlarge

#	Part	Description	Req	Notes
0	275-8700	METERING KIT, DETGT, CI (Tennant Industrial)	1	(includes 1-24)
1	275-8701	TANK, DETGT (Tennant Industrial)	1
2	175-3384	Tank cap	1	(includes 3)
3	275-4663	Gasket	1
4	175-3414	Tank cover	1
5	275-8702	GROMMET, PYE, 0.37ID, F/1.5H, .13 MATL (Tennant Industrial)	2
6	175-8716	FITTING, PLSTC, E90, BM06/BM06 (Tennant Industrial)	1
7	175-6958	Hose PVC (Tennant Industrial) (OBSOLETE)	1
8	275-8703	Straight plastic fitting (Tennant Industrial)	1
9	275-8704	SCREEN, PUMP (Tennant Industrial)	1
10	275-2610	Detergent tank mounting plate (gray) (Tennant Industrial)	1
11	999-0355	175-2249	4
12	999-0496	Nut M8-1.25 nylon insert lock stainless steel	2
13	999-0786	Screw M8-1.25 x 35mm hex head stainless steel	2
14	275-8706	PUMP, DETGT, 36VDC (Tennant Industrial)	1
15	175-5326	Screw M4-.7 x 20mm pan head phillips stainless steel	4
16	999-0954	Nut M4-.7 nylon insert lock stainless steel	4
17	999-0266	Washer #8 SAE flat stainless steel	4
18	275-2611	Detergent pump mounting angle (gray) (Tennant Industrial)	1
19	275-8708	HOSE, PVC, BRD, 0.38ID 0.60OD 045.0L,CLR (Tennant Industria	1
20	275-7845	8 foot clear PVC hose (Tennant Industrial)	1
21	999-0786	Screw M8-1.25 x 35mm hex head stainless steel	2
22	275-8710	Straight plastic fitting (Tennant Industrial)	1
23	175-3594	Hose clamp	4
24	275-8711	BRACKET, RETAINING, TANK, DETGT (Tennant Industrial)	1

Directional Control Assembly

Click to enlarge

#	Part	Description	Req	Notes
1a	275-9282	PEDAL ASSY, PROPEL, 36VDC (Tennant Industrial)	1	(includes 2-3) (between SN 001947 and SN 003394) (replaced by 1b)
1b	275-5774	Pedal kit (Tennant Industrial)	1	(includes 2-3) (after SN 003393)
2	175-9511	VR, SENSOR, POSITION, PEDAL (Tennant Industrial)	1	(between SN 001947 and SN 003394)
3	175-3307	Non-skid tread	1	(between SN 001947 and SN 003394)
4	175-3298	Bolt M6-1 x 12mm hex head	4	(between SN 001947 and SN 003394)
5	275-8320	TREAD, NON-SKID, 06.0W 15.5L (Tennant Industrial)	1	(after SN 001946)
6	175-3311	Rubber grommet	1	(after SN 001946)
7	175-3307	Non-skid tread	1	(before SN 001947)
8	175-0598	Screw 5mm-.8 x 6 pan head	2	(before SN 001947)
9	999-0998	Washer #10 flat stainless steel	2	(before SN 001947)
10	999-0089	Washer #10 internal star lock zinc plated	2	(before SN 001947)
11	175-0599	Electronic control throttle arm	1	(before SN 001947)
12	999-0510	Screw 1/4-20 x 1 pan head phillips zinc plated	1	(before SN 001947)
13	999-0152	Nut 1/4-20 nylon insert lock zinc plated	1	(before SN 001947)
14	175-3302	Balljoint 1/4-28	2	(before SN 001947)
15	175-0600	2 end thread rod	1	(before SN 001947)
16	999-0651	Nut 1/4-28 hex stainless steel	2	(before SN 001947)
17	999-1201	Nut 1/4-28 nylon insert lock hex stainless steel	2	(before SN 001947)
18	999-0123	Washer 1/4 SAE flat zinc plated	2	(before SN 001947)
19	175-3299	Spring retainer	2	(before SN 001947)
20	175-3300	Strip stainless	4	(before SN 001947)
21	999-0518	Bolt M6-1 x 25mm hex head full thread zinc	2	(before SN 001947)
22	999-0469	Nut M6-1 nylon insert lock zinc plated	2	(before SN 001947)
23	175-3301	Accelerator pedal weldment	1	(before SN 001947)
24	175-3258	Bolt M10-1.5 x 35mm hex head	1	(before SN 001947)
25	999-0767	Nut M10-1.5 hex coarse thread	1	(before SN 001947)
26	175-3303	Spacer	1	(before SN 001947)
27	999-9081	Screw M10-1.5 x 65mm hex head stainless steel	1	(before SN 001947)
28	999-0120	Washer 3/8 SAE flat	1	(before SN 001947)
29	999-1120	Nut M10-1.5 nylon insert lock stainless steel	1	(before SN 001947)
30	175-0602	Screw M8-1.25 x 25mm socket	1	(before SN 001947)
31	999-0471	Nut M8-1.25 nylon insert lock zinc plated	1	(before SN 001947)
32	175-3280	Clevis pin	1	(before SN 001947)
33	999-0114	Washer 1/2 SAE flat	1	(before SN 001947)
34	175-3281	Cotter pin	1	(before SN 001947)
35	175-0597	Speed controller	1	(before SN 001947)
36	999-0779	Screw M6-1 x 25mm hex head plain finish	4	(after SN 003394)
37	275-9282	PEDAL ASSY, PROPEL, 36VDC (Tennant Industrial)	1	(includes 38-40) (after SN 003394)
38	175-9511	VR, SENSOR, POSITION, PEDAL (Tennant Industrial)	1	(after SN 003394)
39	275-9283	Non-skid tread	1	(after SN 003394)
40	275-9284	Pedal Circuitboard	1	(after SN 003394)

ec-H2O Module Breakdown Assembly - 9006270

Click to enlarge

#	Part	Description	Req	Notes
0	275-7912	ec-H2O module kit (Tennant Industrial)	1	(includes 1-24)
1	275-4775	Controller replacement kit (ec-H2O)	1
2	999-0531	Screw M5-.8 x 16mm pan head slotted zinc	8
3a	275-2630	Ec-H20 plumbing kit	1	(includes 3b-22)
3b	275-4956	5 plate electrode	1
4	275-4958	Main wiring harness	1
5	275-4939	1 foot PVC hose clear	1
6	275-2631	2 foot PVC hose (braided)	1
7	275-2632	Hose clamp (yellow) (Tennant Industrial)	3
8	275-5731	Direction decal	1
9	275-4957	Front module housing	1
10	999-1947	Screw M4-.7 x 50 hex stainless steel	4
11	999-0266	Washer #8 SAE flat stainless steel	4
12	999-0954	Nut M4-.7 nylon insert lock stainless steel	4
13	275-2633	Ec-H20 module decal	1
14	275-4773	Rocker switch	1
15	275-2634	Large valve bracket (Tennant Industrial)	1
16	275-2635	Screw 10-32 x .31 flat head phillips	2
17	275-9936	Cylindrical electrode	1
18	275-4770	Straight brass fitting	1
19	275-2636	Solenoid valve (Tennant Industrial)	1
20	175-8707	Strainer plastic fitting	1
21	275-2637	90 degree nylon elbow fitting (Tennant Industrial)	1
22	175-3671	Hose clamp	1
23	275-4761	Rear module housing	1
24	275-2638	Grommet	1

ec-H2O Solution Pump Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	275-2593	Module bracket weldment (Tennant Industrial)	1
2	275-9575	SCREW, HEX, M8 X 1.25 X 25, 9.8, SEMS (Tennant Industrial)	3
3	275-7912	ec-H2O module kit (Tennant Industrial)	1
4	275-5946	Grommet	1
5	999-1312	Screw M6-1 x 20mm hex head stainless steel	4
6	175-5242	36V solution pump	1
7	175-5205	Wormdrive hose clamp	1
8	175-5241	90 degree elbow	1
9	175-6863	Straight brass fitting	1
10	275-0341	Brass tee fitting	1
11	175-8707	Strainer plastic fitting	1
12	175-7941	Air vent valve	1
13	275-2594	Component bracket (Tennant Industrial)	1
14	999-0783	Screw M8-1.25 x 16mm hex head	1
15	999-0248	Bolt M8-1.25 x 30mm hex head full thread plain finish	2
16	999-0123	Washer 1/4 SAE flat zinc plated	3
17	175-0559	P clamp	1
18	999-0471	Nut M8-1.25 nylon insert lock zinc plated	1
19	275-2595	2amp circuit breaker (Tennant Industrial)	3
20	275-2596	Circuit breaker boot (Tennant Industrial)	3
21	275-4942	Alarm	1	(ec-H2O)
22	275-2597	Resistor (Tennant Industrial)	1
23	175-0852	Bolt 5mm-.8 x 12 hex head	2
24	999-0998	Washer #10 flat stainless steel	2
25	275-8551	Nut M5-.8 x 16mm hex flange (Tennant Industrial)	2
26	175-2523	Plastic fitting	1
27	175-3594	Hose clamp	18
28	275-9307	INSERT, CPLG, QM, BM08 (Tennant Industrial)	2
29	275-9306	HOUSING, CPLG, QF / PM08 (Tennant Industrial)	2
30	175-5234	Plastic fitting	1
31	175-9025	In-line screen filter assembly	1
32	175-5241	90 degree elbow	1
33	275-5768	Plastic fitting	1
34	175-6022	Brass fitting	1
35	275-2598	30 PSI check valve (Tennant Industrial)	1
36	275-2599	Plastic tee fitting (Tennant Industrial)	1
37	175-6943	FITTING, PLSTC, TEE, BM06/BM06/BM06 (Tennant Industrial)	1
38	275-7329	SWITCH, PRESS, 25 PSI, PM02 (Tennant Industrial)	1
39	175-8694	Brass fitting	1
40	275-7246	Straight plastic fitting (Tennant Industrial)	1
41	275-4757	Fitting assembly	1
42	175-3179	P clamp	1
43	275-2600	Tube (Tennant Industrial)	1
44	175-4738	Fitting	1
45	175-3594	Hose clamp	1
46	675-9600	HOSE, AFMKT, PVC, BRD, 0.25ID, 03FT (Tennant Industrial)	1
47	275-2601	3 foot braided PVC hose (clear)	1
48	175-9703	HOSE, AFMKT, PVC, BRD, 0.50ID, 08FT, CLR (Tennant Industria	1

ec-H2O Solution Pump Breakdown Assembly

Click to enlarge

#	Part	Description	Req	Notes
0	175-5242	36V solution pump	1	(includes 1-5)
1	175-8752	Pump head kit	1
2	175-8753	Female connector	1
3	175-8755	TERMINAL, FEM, MP280, SEALED, 18-16GA (Tennant Industrial)	1
4	175-8754	14/16 wire seal	1
5	175-8756	Male and female secondary lock	1

ec-H2O Switch and Decal Assembly

Click to enlarge

#	Part	Description	Req
1	275-8550	SWITCH, ROCKER, PRGRSV (Tennant Industrial)	1
2	275-4715	LED light	1
3	275-2602	LED light bushing (Tennant Industrial)	1
4	175-2289	Washer	1
5	275-2603	Decal set (Tennant Industrial)	1
6	275-5732	Attention users decal (ec-H2O)	1
7	175-2216	Diode plug	1
8	275-4752	Capacitor plug	1
9	375-0922	Logo decal - ec-H2O (Tennant Industrial)	1
10	275-2448	Logo decal - ec-H2O (Tennant Industrial)	2

ec-H2O Wire Harness Assembly

Click to enlarge

#	Part	Description	Req	Notes	Availability
1	275-2604	Wire harness (module) (Tennant Industrial)	1
2	275-2605	Wire harness (interface) (Tennant Industrial)	1

Edge Scrub Assembly - Cylindrical - Max Pro 1000

Click to enlarge

#	Part	Description	Req
1	175-0753	ROLLER, V-GROOVE, 1.5D 0.72B 0.8L [STL] (Tennant Industrial	2
2	175-2563	Sleeve	2
3	175-2099	Flanged bushing	4
4	175-2854	Screw M8-1.25 x 45mm hex head stainless steel	2
5	275-2570	Rail lift weldment (gray) (Tennant Industrial)	1
6	175-0755	Sleeve	2
7	175-3168	P clamp	1
8	999-1312	Screw M6-1 x 20mm hex head stainless steel	1
9	175-0602	Screw M8-1.25 x 25mm socket	2
10	999-0355	175-2249	2
11	175-0757	SHUNT, 2 HD MOTOR, RED [SCB 515] (Tennant Industrial)	1
12	175-0758	Bolt M6-1 x 40mm hex head stainless steel	2
13	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	3
14	999-0497	Nut M6-1 nylon insert lock stainless steel	3
15	175-0759	ACTUATOR, 36VDC, 02.7STRK, 500LB (Tennant Industrial)	1
16	175-2382	Clevis pin	2
17	175-3281	Cotter pin	2
18	175-0761	Gas spring ball stud	2
19	175-0762	NUT, RETAINER, .31-18 (Tennant Industrial)	2
20	275-9322	Side pivot arm weldment (gray) (Tennant Industrial)	1
21	173-1595	Clevis pin	1
22	999-0355	175-2249	1
23	175-6176	Cotter pin	1
24	175-0765	Gas spring, 56lb, 6.3 stroke (Tennant Industrial)	1
25	175-0766	CABLE, GLV .13D 015.5L .50EYE /.50EYE (Tennant Industrial)	1

Edge Scrub Assembly - Cylindrical - Max Pro 1200

Click to enlarge

#	Part	Description	Req
1	175-0753	ROLLER, V-GROOVE, 1.5D 0.72B 0.8L [STL] (Tennant Industrial	2
2	175-2563	Sleeve	2
3	175-2099	Flanged bushing	4
4	175-2854	Screw M8-1.25 x 45mm hex head stainless steel	2
5	275-2570	Rail lift weldment (gray) (Tennant Industrial)	1
6	175-0755	Sleeve	2
7	175-3168	P clamp	1
8	999-1312	Screw M6-1 x 20mm hex head stainless steel	1
9	175-0602	Screw M8-1.25 x 25mm socket	2
10	999-0355	175-2249	4
11	175-0757	SHUNT, 2 HD MOTOR, RED [SCB 515] (Tennant Industrial)	1
12	175-0758	Bolt M6-1 x 40mm hex head stainless steel	2
13	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	3
14	999-0497	Nut M6-1 nylon insert lock stainless steel	3
15	999-1368	Screw M8-1.25 x 60mm hex head stainless steel	1
16	999-0496	Nut M8-1.25 nylon insert lock stainless steel	1
17	175-0761	Gas spring ball stud	2
18	175-0762	NUT, RETAINER, .31-18 (Tennant Industrial)	2
19	275-9322	Side pivot arm weldment (gray) (Tennant Industrial)	1
20	173-1595	Clevis pin	1
21	999-0355	175-2249	1
22	175-6176	Cotter pin	1
23	175-0765	Gas spring, 56lb, 6.3 stroke (Tennant Industrial)	1
24	175-0766	CABLE, GLV .13D 015.5L .50EYE /.50EYE (Tennant Industrial)	1

Edge Scrub Assembly - Disc - Max Pro 1000

Click to enlarge

#	Part	Description	Req	Notes
1	175-0753	ROLLER, V-GROOVE, 1.5D 0.72B 0.8L [STL] (Tennant Industrial	2
2	175-2563	Sleeve	2
3	175-2099	Flanged bushing	4
4	175-2854	Screw M8-1.25 x 45mm hex head stainless steel	2
5	275-9321	Disk head lift rail weldment (iron gray) (Tennant Industria	1
6	175-0755	Sleeve	2
7	175-3168	P clamp	1
8	999-1312	Screw M6-1 x 20mm hex head stainless steel	1
9	175-0602	Screw M8-1.25 x 25mm socket	2
10	999-0355	175-2249	2
11a	175-0756	SHUNT, 2 STD MOTOR, BLK [SCB 515] (Tennant Industrial)	1	(for standard motor)
11b	175-0757	SHUNT, 2 HD MOTOR, RED [SCB 515] (Tennant Industrial)	1	(for heavy duty motor)
12	175-0758	Bolt M6-1 x 40mm hex head stainless steel	2
13	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	3
14	999-0497	Nut M6-1 nylon insert lock stainless steel	3
15	175-0759	ACTUATOR, 36VDC, 02.7STRK, 500LB (Tennant Industrial)	1
16	175-2382	Clevis pin	2
17	175-3281	Cotter pin	2
18	175-0761	Gas spring ball stud	2
19	175-0762	NUT, RETAINER, .31-18 (Tennant Industrial)	2
20	275-9322	Side pivot arm weldment (gray) (Tennant Industrial)	1
21	173-1595	Clevis pin	1
22	999-0355	175-2249	1
23	175-6176	Cotter pin	1
24	175-0765	Gas spring, 56lb, 6.3 stroke (Tennant Industrial)	1
25	175-0766	CABLE, GLV .13D 015.5L .50EYE /.50EYE (Tennant Industrial)	1

Edge Scrub Assembly - Disc - Max Pro 1200

Click to enlarge

#	Part	Description	Req
1	275-9321	Disk head lift rail weldment (iron gray) (Tennant Industria	1
2	175-0755	Sleeve	2
3	999-0355	175-2249	4
4	175-0602	Screw M8-1.25 x 25mm socket	2
5	275-4168	SHUNT, 3 STD MOTOR, YEL [SCB 515] (Tennant Industrial)	1
6	175-0758	Bolt M6-1 x 40mm hex head stainless steel	2
7	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	3
8	999-0497	Nut M6-1 nylon insert lock stainless steel	3
9	175-0753	ROLLER, V-GROOVE, 1.5D 0.72B 0.8L [STL] (Tennant Industrial	2
10	175-2563	Sleeve	2
11	175-2099	Flanged bushing	4
12	175-2854	Screw M8-1.25 x 45mm hex head stainless steel	2
13	275-9322	Side pivot arm weldment (gray) (Tennant Industrial)	1
14	173-1595	Clevis pin	1
15	999-0355	175-2249	1
16	175-6176	Cotter pin	1
17	175-0765	Gas spring, 56lb, 6.3 stroke (Tennant Industrial)	1
18	175-0761	Gas spring ball stud	2
19	175-0766	CABLE, GLV .13D 015.5L .50EYE /.50EYE (Tennant Industrial)	1
20	999-1368	Screw M8-1.25 x 60mm hex head stainless steel	1
21	999-0496	Nut M8-1.25 nylon insert lock stainless steel	1
22	175-0762	NUT, RETAINER, .31-18 (Tennant Industrial)	2
23	175-0742	TUBE, 0.52ID 1.75OD 01.6L, STL (Tennant Industrial)	1
24	175-0716	Clevis pin	1
25	999-0187	Washer 1/2 flat plain finish	1
26	175-3281	Cotter pin	1
27	175-3168	P clamp	1
28	999-1312	Screw M6-1 x 20mm hex head stainless steel	1

Electric Motor Breakdown Assembly - 17363

Click to enlarge

#	Part	Description	Req	Notes
0	275-5200	36V 3 stage vacuum motor kit	1	(includes 1-22)
1	275-0172	Vacuum motor housing	1
2	275-0173	Vacuum motor fan	1
3	275-0174	Brush holder clamp	2
4	991-1222	Plastic covered carbon brush (sold individually)	2
5	275-0175	Vacuum motor screw	2
6	275-0176	Vacuum motor bracket	1
7	175-5279	Spring	1
8	275-0177	Vacuum motor armature disc	1
9	275-0178	Vacuum motor bearing	1
10	175-5281	Bearing	1
11	175-5282	Washer neoprene	1
12	275-0179	Vacuum impeller spacer	1
13	175-5284	Fan	1
14	175-5285	Vacuum fan	3
15	275-0180	Vacuum fan impeller spacer	2
16	175-5287	Stationary fan	1
17	175-5288	Stationary fan	1
18	275-0181	Vacuum fan shell	1
19	275-0182	VR, WASHER (Tennant Industrial)	1
20	175-5290	Nut	1
21	175-5291	Fan end bracket	1
22	275-0183	Motor armature	1
N/S	164-0881	Vacuum motor gasket	1	(included with 0)
N/S	175-5293	Female connector	1	(included with 0)
N/S	175-5294	Female terminal	2	(included with 0)

Electric Motor Breakdown Assembly - 386050

Click to enlarge

#	Part	Description	Req	Notes
0	275-2566	Electric Motor - 1.5 HP 36 Volt (Tennant Industrial)	1	(includes 1-10)
1	275-4327	VR, BRUSH, MOTOR, ELE (Tennant Industrial)	4
2	275-4328	VR, BEARING, MOTOR, ELE (Tennant Industrial)	1
3	N/A	Not available	1	(bearing)
4	275-0085	Square key .19 x .19 1.25l	1	(includes 5)
5	275-8770	VR, SPRING, BRG (Tennant Industrial)	1
6	275-8771	VR, RING, BRUSH, MOTOR, ELE (Tennant Industrial)	1
7	275-8772	VR, SPRING, MOTOR, ELE (Tennant Industrial)	4
8	275-8773	VR, ARMATURE, MOTOR [OHIO] (Tennant Industrial)	1
9	175-5365	Female terminal	2
10	175-5293	Female connector	1

Electric Motor Breakdown Assembly - 386679

Click to enlarge

#	Part	Description	Req	Notes
0	275-2461	1.5Hp 36V motor (Tennant Industrial)	1	(includes 1-9)
1	275-9057	Carbon brush kit (OBSOLETE)	1
2	275-8769	VR, RING ASSY, BRUSHHOLDER (Tennant Industrial) (OBSOLETE)	1	(includes 3)
3	275-8774	VR, SPRING, BRUSH (Tennant Industrial) (OBSOLETE)	4
4	N/A	Not available	1	(bearing)
5	275-4328	VR, BEARING, MOTOR, ELE (Tennant Industrial)	1
6	175-5293	Female connector	1
7	175-5365	Female terminal	2
8	175-5356	Square keyway	1
9	275-9058	Motor gearbox (OBSOLETE)	1

Electric Motor Breakdown Assembly - 386687

Click to enlarge

#	Part	Description	Req	Notes
0	275-2460	1Hp 36V motor (Tennant Industrial)	1	(includes 1-7)
1	175-5352	Carbon brush (pkg of 4)	1
2	175-5353	Bearing	1
3	275-1236	Bearing	1
4	175-5293	Female connector	1
5	175-5365	Female terminal	2
6	175-5356	Square keyway	1
7	175-7927	Gearbox	1

Electric Motor Breakdown Assembly - 387585

Click to enlarge

#	Part	Description	Req	Notes
0	275-2461	1.5Hp 36V motor (Tennant Industrial)	1	(includes 1-9)
1	275-8810	Carbon brush (Tennant Industrial)	4
2	275-9078	Brush assembly (Tennant Industrial)	1
3	275-8811	VR, BRUSH, SPRING (Tennant Industrial)	4
4	275-9077	Bearing (Tennant Industrial)	1
5	275-1236	Bearing	1
6	175-5293	Female connector	1
7	175-5365	Female terminal	2
8	175-5356	Square keyway	1
9	175-7927	Gearbox	1

Electric Motor Breakdown Assembly - 398520

Click to enlarge

#	Part	Description	Req	Notes
0	275-5200	36V 3 stage vacuum motor kit	1	(includes 1-18)
1	175-5275	Housing	1
2	175-5276	Fan	1
3	575-2509	LINK, LIFT, BRUSH (Tennant Industrial)	2
4	175-5278	Commuicator bracket (OBSOLETE)	1
5	175-5279	Spring	1
6	275-0184	Bearing	1
7	175-5281	Bearing	1
8	175-5282	Washer neoprene	1
9	175-5283	Spacer	1
10	175-5284	Fan	1
11	175-5285	Vacuum fan	3
12	175-5286	Spacer	2
13	175-5287	Stationary fan	1
14	175-5288	Stationary fan	1
15	175-5289	Shell	1
16	175-5290	Nut	1
17	175-5291	Fan end bracket	1
18	175-5292	Armature	1
N/S	164-0881	Vacuum motor gasket	1	(included with 0)
N/S	175-5293	Female connector	1	(included with 0)
N/S	175-5294	Female terminal	2	(included with 0)

Electric Motor Breakdown Assembly - 60198

Click to enlarge

#	Part	Description	Req	Notes
0	175-0611	MOTOR, ELE, 36VDC 2000RPM 3.00HP (Tennant Industrial)	1	(includes 1-8)
1	275-4333	VR, SEAL, ARMATURE, MOTOR, ELE [AV] (Tennant Industrial)	1
2	275-4334	VR, BEARING, BALL, MOTOR, ELE [AV] (Tennant Industrial)	1
3	275-0186	Electric motor brush spring	4
4a	275-4335	Propelling motor brush kit	1	(includes 4b)
4b	275-5046	Brush	4
5	275-4336	VR, BRUSHHOLDER, MOTOR, ELE [AV] (Tennant Industrial)	1
6	275-0187	Electric motor ball bearing	1
7	275-4337	VR, BAND, BRUSH COVER [AV] (Tennant Industrial)	1
8	275-4338	KEY, WOODRUFF, 0.16 0.62 [ASA#0505] (Tennant Industrial)	1

ES Drain Assembly

Click to enlarge

#	Part	Description	Req	Notes
0	275-8692	HOSE KIT, DRAIN, SOLTN SIDE (Tennant Industrial)	1	(includes 1-17)
1	175-3391	Drain cap kit	1	(includes 2-5)
2	175-3394	Drain tank cap 2.25 thread pye	1
3	175-3393	Cap gasket	1
4	175-3395	3/4 ID retaining extension ring stainless steel	1
5	175-3392	Strap	1
6	175-3390	Drain tank cap 3.85 thread pye	1
7	175-3384	Tank cap	1	(includes 8)
8	275-4663	Gasket	1
9	175-3388	Drain cap gasket	1
10	175-3387	Seal	1
11	175-3386	Insert cover	1
12	175-3381	Plastic hose clamp 1.6 ID x .62	1
13	175-3382	Bolt M5-.8 x 25mm hex head stainless steel	1
14	999-0998	Washer #10 flat stainless steel	1
15	999-0740	Nut M5-.8 hex stainless steel	1
16	175-3389	Lid gasket	1
17	175-0708	HOSE ASSY, DRAIN (Tennant Industrial)	1

ES Pump Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	275-2585	Iron mounting angle (gray) (Tennant Industrial)	1
2	999-0355	175-2249	2
3	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	2
4	275-8675	FITTING KIT, HOSE, GARDEN (Tennant Industrial)	1	(includes 5)
5	175-2303	Rubber washer	1
6	275-4202	FITTING, BRS, QDC, BM12/QF08 (Tennant Industrial)	1
7	275-2586	Iron mounting bracket (gray) (Tennant Industrial)	1
8	999-0784	Screw M8-1.25 x 16mm hex head stainless steel	2
9	175-5255	Impeller solution pump 36vdc	1
10	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	7
11	999-0497	Nut M6-1 nylon insert lock stainless steel	7
12	999-1087	Bolt M6-1 x 25mm hex head stainless steel	4
13	175-5256	Plastic fitting	1
14	175-0199	Hose clamp	8
15	275-2587	Hose 2 feet (clear) (Tennant Industrial)	1
16	175-9686	HOSE, PVC, BRD, 0.75ID 1.03OD 026.0L,CLR (Tennant Industria	1
17	175-0680	Strain plastic fitting	2
18	275-8648	FITTING, PLSTC, STR, BM12/PM08, NYL (Tennant Industrial)	1
19	275-4197	FITTING, PLSTC, TEE, PF08/PF08/PF08 (Tennant Industrial)	1
20	275-8679	FITTING, PLSTC, STR, PM08/PM08 (Tennant Industrial)	2
21	275-4208	VALVE, WATER, SOLENOID, 36VDC PF08/PF08 (Tennant Industrial	2
22	275-2588	Iron support bracket (gray) (Tennant Industrial)	1
23	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	3
24	175-3430	Plastic fitting	1
25	275-8603	FITTING, PLSTC, E90, BM12/PM08 (Tennant Industrial)	1
26	175-9668	45 degree elbow plastic fitting	1
27	175-0663	FITTING, PLSTC, STR, PM12/PM12 1.60L (Tennant Industrial)	1
28	175-9679	90 degree plastic elbow	1
29	275-8680	HOSE, PVC, BRD, 0.75ID 1.03OD 014.0L,CLR (Tennant Industria	1
30	275-4203	FITTING, BRS, QDC, PF08 [PARKER BH3F] (Tennant Industrial)	1
31	175-2247	Plastic fitting	1
32	175-2556	Switch plug	1
33	175-9923	Black nylon plug	1

ES Tank Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	175-0199	Hose clamp	3
2	175-9679	90 degree plastic elbow	2
3	275-8681	HOSE, PVC, BRD, 0.75ID 1.03OD 028.0L,CLR (Tennant Industria	1
4	275-2188	FITTING, PLSTC, E90, BM12/PF12 (Tennant Industrial)	1
5	275-8682	STRAINER, SOLTN, 20MESH, CYL, 3.5D 09.5L (Tennant Industria	1
6	275-2589	14 inch press switch tube	1	(before SN 001542)
7	999-0496	Nut M8-1.25 nylon insert lock stainless steel	1
8	175-0698	HOSE, VACUUM, 0.16ID X 006.0L (Tennant Industrial)	1	(before SN 001542)
9	999-1352	Screw 10-14 x 3/4 phillips pan head plastic thread rolling	4
10	275-3939	CLIP, GRIP, FINGER, 1.00-1.88D,WHITE VYL (Tennant Industria	1
11	275-2590	Wand angle (gray) (Tennant Industrial)	1
12	275-2591	Wand plate (gray) (Tennant Industrial)	1
13	999-0521	Screw M4-.7 x 12mm pan head phillips zinc	1
14	999-0954	Nut M4-.7 nylon insert lock stainless steel	1
15	275-8685	WAND, CLEAN-OUT (Tennant Industrial)	1
16	275-8686	NOZZLE, WATER (Tennant Industrial)	1
17	275-8687	FITTING, PLSTC, STR, PM08/[GARDEN HOSE] (Tennant Industrial	1
18	275-8688	WASHER, FLAT, 0.68B 1.00D .15, RBR (Tennant Industrial)	1
19	275-8689	STRAINER, SOLTN, 20MESH, CYL, 3.1D 18.0L (Tennant Industria	1
20	175-3372	3 inch press switch assembly 8 inch tube	1
21	175-8150	VALVE, WATER, FLOW CNTRL, HOSE ADAPTER (Tennant Industrial)	1
22	275-8690	HOSE, PVC, BRD, 0.63ID 0.88OD 055.0L,CLR (Tennant Industria	1
23	275-8691	HOSE, PVC, CLR, 0.50ID 0.69OD 050.0L (Tennant Industrial)	1
24	175-2162	Nylon wire tie	2
25	175-2260	P clamp	1
26	999-0783	Screw M8-1.25 x 16mm hex head	1
27	175-0678	BRACKET [FULL] (Tennant Industrial)	1
28	999-0785	Screw M8-1.25 x 30mm hex head stainless steel	1
29	175-2896	Washer 5/16	1
30	999-0355	175-2249	2
31a	175-9555	Switch guard solution strainer (Tennant Industrial)	2	(between SN 001542 and SN 002264) (replaced by 31b)
31b	275-4664	Float switch protector bracket	2
32a	175-2262	Magnetic float sensor	2	(between SN 001542 and SN 002036)
32b	175-9554	Float switch	2	(after SN 002036)
33	275-8344	HARNESS, SENSOR, JUMPER (Tennant Industrial)	2	(between SN 001542 and SN 002036)
34	275-4664	Float switch protector bracket	2	(after SN 002264)

FaST Air Pump and Detergent Assembly - Before SN 003747

Click to enlarge

#	Part	Description	Req	Notes
1a	275-8334	BRACKET WLDT [7300/8300 FaST] (Tennant Industrial)	1	(before SN 002448)
1b	275-9294	BRACKET WLDT [7300/8300 FaST] (Tennant Industrial)	1	(between SN 002448 and SN 003746)
2	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	3
3	999-0024	Washer 5/16 flat stainless steel	3
4	275-8335	FITTING, PLSTC, E90, BM04/PM04, NYL	1
5	175-5304	Hose clamp	8
6	175-9691	Hose 1/4 x 1 foot (Tennant Industrial)	2
7	175-5307	Brass fitting	2
8	175-1659	Fitting	2
9	275-8336	BRACKET, MTG, PUMP, DETGT [7300/8300] (Tennant Industrial)	1
10	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	2
11	999-0123	Washer 1/4 SAE flat zinc plated	2
12	175-5306	HOSE, AFMKT, PVC, CLR, 0.25ID, 02FT (Tennant Industrial)	1
13	275-8337	PUMP, DETGT [560S] (Tennant Industrial)	1
14	999-0521	Screw M4-.7 x 12mm pan head phillips zinc	2
15	999-0377	Washer 6 SAE flat plain finish	2
16	999-0954	Nut M4-.7 nylon insert lock stainless steel	2
17	175-5311	Female fitting with valve	1
18	175-5312	Male coupling strainer fitting	1
19	175-5313	Plastic cap fitting	1
20	175-5316	Elevated air pump 36vdc	1
21	175-5314	P clamp (Tennant Industrial)	1
22	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	1
23	999-0406	Washer 5/16 internal star lock zinc plated	1
24	999-0024	Washer 5/16 flat stainless steel	1
25	999-0471	Nut M8-1.25 nylon insert lock zinc plated	1
26	175-5318	Filter assembly	1
27	275-8338	VALVE, CHECK, 2GPM .5PSI BM04/BM04 (Tennant Industrial)	1
28	275-8339	FITTING, PLSTC, STR, BM04/BM08 (Tennant Industrial)	1
29	175-6081	Hose clamp	2
30	175-5249	Hose 1/2 x 1 foot (Tennant Industrial)	1
31	275-4755	Tee fitting	1
32	275-9295	Rubber grommet	1
33	275-9297	2 liter detergent - DO NOT ORDER	1	(detergent)

FaST Electrical Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	275-8550	SWITCH, ROCKER, PRGRSV (Tennant Industrial)	1
2a	175-2336	10amp circuit breaker	1	(before SN 003747)
2b	175-2557	5amp circuit breaker	1	(after SN 003746)
3	275-2534	Timer (Tennant Industrial)	1	(before SN 003747)
4	175-6758	Screw M6-1 x 30mm hex head	1	(before SN 003747)
5	999-0469	Nut M6-1 nylon insert lock zinc plated	1	(before SN 003747)
6	175-2265	36V 5amp relay	2
7a	175-0837	Bolt M5-.8 x 16mm hex head	2	(before SN 003747)
7b	175-0852	Bolt 5mm-.8 x 12 hex head	1	(after SN 003746)
8a	275-8551	Nut M5-.8 x 16mm hex flange (Tennant Industrial)	2	(before SN 003747)
8b	999-0006	Washer 3/16 flat zinc plated	1	(after SN 003746)
9	175-5223	FaST decal	1	(before SN 003747)
10	275-8552	LABEL, SWITCH [7300/8300 FaST] (Tennant Industrial)

FaST Foam Filter Assembly - Before SN 003747

Click to enlarge

#	Part	Description	Req	Notes
1	175-2523	Plastic fitting	1
2	175-6081	Hose clamp	6
3	175-5249	Hose 1/2 x 1 foot (Tennant Industrial)	1
4	175-5234	Plastic fitting	1
5a	175-9025	In-line screen filter assembly	1	(includes 6) (OEM)
5b	991-8582	Mesh inline filter	1	(NON-OEM)
6a	175-5866	Mesh filter screen	1	(OEM)
6b	991-8569	Mesh filter screen stainless steel	1	(NON-OEM)
7	175-5241	90 degree elbow	2
8	275-9309	20 foot PVC hose	1
9	175-5231	Nylon fitting	1
10	175-3596	Plastic tube	1
11	175-3597	Foam filter	3
12	275-9307	INSERT, CPLG, QM, BM08 (Tennant Industrial)	1
13	275-9306	HOUSING, CPLG, QF / PM08 (Tennant Industrial)	1

FaST Injector Breakdown Assembly - 1070035

Click to enlarge

#	Part	Description	Req	Notes
0	275-7391	Injector assembly	1	(includes 1-8)
1	275-2639	FaST injector rebuild kit	1	(includes 2-8))
2	275-9927	FaST injector seal kit	1
3	275-5319	FaST filter kit (OBSOLETE)	1
4	275-2640	Orifice plate assembly (purple) (Tennant Industrial)	1
5	275-2641	Orifice plug (Tennant Industrial)	1
6	275-2642	Large insert (Tennant Industrial)	1
7	275-5929	Check valve (white)	1
8	275-5930	Check valve (brown) (OBSOLETE)	1

FaST Pumps and Detergent Assembly - After SN 003746

Click to enlarge

#	Part	Description	Req	Notes
1	275-9299	Bracket weldment (Tennant Industrial)	1
2	999-0783	Screw M8-1.25 x 16mm hex head	3
3	999-0024	Washer 5/16 flat stainless steel	3
4	275-9300	Mounting bracket (Tennant Industrial)	1
5	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	1
6	999-0998	Washer #10 flat stainless steel	7
7	175-0550	Sleeve	4
8	275-9301	PUMP, SOLTN, 36VDC, 65PSI [FaST II+] (Tennant Industrial)	1
9	175-2894	Nut M5-.8 hex nylon locking	4
10	275-9293	VALVE, WATER, SOLENOID, 36VDC 6.0MM PF04 (Tennant Industria	1
11	175-6029	Straight tee	1
12	175-7218	Plastic straight fitting	1
13	175-6926	Plastic elbow fitting	2
14	175-0852	Bolt 5mm-.8 x 12 hex head	2
15	275-9302	FITTING, NYL, QDC, E90, BM06/ QM10 (Tennant Industrial)	1
16	275-9303	FITTING, NYL, QDC, E90, BM08/ QM10 (Tennant Industrial)	1
17	175-5241	90 degree elbow	1
18a	175-9025	In-line screen filter assembly	1	(OEM)
18b	991-8582	Mesh inline filter	1	(NON-OEM)
19	175-5234	Plastic fitting	1
20	275-7391	Injector assembly	2
21	275-9305	Check valve (Tennant Industrial)	2
22	175-5240	FITTING, PLSTC, Y, BM08/BM08/BM08, NYL (Tennant Industrial)	1
23	275-9306	HOUSING, CPLG, QF / PM08 (Tennant Industrial)	2
24	175-7303	1/4 inch union tee	1
25	175-5311	Female fitting with valve	1
26	175-5312	Male coupling strainer fitting	1
27	175-5313	Plastic cap fitting	1
28	275-1534	3 foot PVC hose (braided) (Tennant Industrial)	2
29	175-5229	HOSE, AFMKT, PVC, BRD, 0.50ID, 02FT, CLR (Tennant Industria	1
30	175-5249	Hose 1/2 x 1 foot (Tennant Industrial)	1
31	175-5306	HOSE, AFMKT, PVC, CLR, 0.25ID, 02FT (Tennant Industrial)	1
32	275-9307	INSERT, CPLG, QM, BM08 (Tennant Industrial)	2
33	175-6081	Hose clamp	22
35	175-2523	Plastic fitting	1

FaST Solution Pump Assembly - Before SN 003747

Click to enlarge

#	Part	Description	Req	Notes
1	175-5242	36V solution pump	1
2	997-2009	Hose clamp	1
3	175-6029	Straight tee	1
4	175-9699	Straight brass fitting	1
5	275-8327	FITTING ASSY, CAP, 0.067B, PF04 (Tennant Industrial)	1	(includes 6-8)
6	175-5248	Mesh screen	1
7	275-8328	PLATE, ORIFICE, 0.067ID (Tennant Industrial)	1
8	175-5246	Washer 11/32 x 3/4 x 1/8 flat viton	1
9	275-8329	FITTING, BRS, STR, PM04/PM04 (Tennant Industrial)	1
10	275-8330	FITTING ASSY, CAP, 0.086B, PF04 (Tennant Industrial)	1	(includes 11-13)
11	175-5248	Mesh screen	1
12	275-8331	PLATE, ORIFICE, 0.086ID (Tennant Industrial)	1
13	175-5246	Washer 11/32 x 3/4 x 1/8 flat viton	1
14	275-4755	Tee fitting	1
15	275-8332	VALVE, CHECK, 2GPM .5PSI BM08/BM08 (Tennant Industrial)	1
16	175-5243	Brass tee fitting	1
17	175-5249	Hose 1/2 x 1 foot (Tennant Industrial)	1
18	175-5228	Plastic fitting	3
19	175-6081	Hose clamp	8
20	175-5229	HOSE, AFMKT, PVC, BRD, 0.50ID, 02FT, CLR (Tennant Industria	3
21	175-5226	Brass fitting	1
22	275-8333	BRACKET, MTG, VALVE, SOLENOID (Tennant Industrial)	1
23	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	2
24	999-0123	Washer 1/4 SAE flat zinc plated	2
25	275-9293	VALVE, WATER, SOLENOID, 36VDC 6.0MM PF04 (Tennant Industria	2
26	275-0923	Screw M5 - 7/8 hex lock	4
27	999-0006	Washer 3/16 flat zinc plated	4

FaST Wire Harness Assembly - After SN 003746

Click to enlarge

#	Part	Description	Req	Notes
1	275-7934	Rear wire harness (Tennant Industrial)	1	(FaST)
2	275-7936	Wire harness (Tennant Industriall)	1	(FaST II+)
3	175-2216	Diode plug	2

FaST Wire Harness Assembly - Before SN 003747

Click to enlarge

#	Part	Description	Req	Notes
1	275-7935	Wire harness (Tennant Industrial)	1	(before SN 002253)
2	175-2216	Diode plug	3
3	275-8557	Resistor plug	1
4	275-7934	Rear wire harness (Tennant Industrial)	1	(between SN 002253 and SN 003746)
5	275-7935	Wire harness (Tennant Industrial)	1	(between SN 002253 and SN 003746)

Fire Extinguisher Assembly

Click to enlarge

#	Part	Description	Req	Notes
0	275-5096	EXTINGUISHER KIT, FIRE, CI [7300/8300] (Tennant Industrial)	1	(includes 1-2)
1	175-8153	Fire extinguisher	1
2	175-3223	Screw 12-16 x 1/2 pan head plastic	2

Front Cover Assembly

Click to enlarge

#	Part	Description	Req	Notes
1a	175-0537	COVER, FRONT (Tennant Industrial) (OBSOLETE)	1	(before SN 005000)
1b	275-9263	Front cover (teal) (Tennant Industrial)	1	(after SN 004999)
2	175-0538	HINGE, .38PIN .11 3.5W 04.0L, 4/0.38SL (Tennant Industrial)	2
3	999-0024	Washer 5/16 flat stainless steel	12
4	999-0783	Screw M8-1.25 x 16mm hex head	8
5	175-0539	CABLE, GLV .13D 027.0L .25EYE /.25EYE (Tennant Industrial)	1
6	999-0502	Bolt M6-1 x 20mm hex head full thread zinc	2
7	999-0016	Washer 1/4 flat plain finish	2
8	999-0469	Nut M6-1 nylon insert lock zinc plated	2
9	175-0540	SEAL (Tennant Industrial) (OBSOLETE)	1
10	175-0541	LATCH, TRIGGER (Tennant Industrial)	1
11	N/A	Not available	1	(replacement bracket kit) (before SN 001155)
12a	275-9268	BRACKET, LATCH, COVER (Tennant Industrial)	1	(between SN 001155 and SN 004999)
12b	275-9264	Latch cover bracket (iron gray) (Tennant Industrial)	1	(after SN 004999)
13a	275-9267	BRACKET, LATCH, COVER (Tennant Industrial)	1	(between SN 001155 and SN 004999)
13b	275-9265	Latch cover bracket (iron gray) (Tennant Industrial)	1	(after SN 004999)
14	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	2	(after SN 001154)
15	999-0471	Nut M8-1.25 nylon insert lock zinc plated	2	(after SN 001154)
16a	275-8533	BRACKET, MTG, CIRCUITBREAKER [HI-MAG] (Tennant Industrial)	1	(between SN 001706 and SN 004999)
16b	275-9266	Circuitbreaker mounting bracket (Tennant Industrial)	1	(after SN 004999)
17	999-0248	Bolt M8-1.25 x 30mm hex head full thread plain finish	2	(after SN 001705)

Front Drive Wheel Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	175-0604	GEARBOX, 90, DRIVE WHEEL, REAR [HU] (Tennant Industrial)	1	(includes 2-7)
2	175-0605	FITTING, GREASE (Tennant Industrial)	2
3	175-0606	VR, SEAL, ORG (Tennant Industrial)	2
4	175-0607	VR, PLUG, GEARBOX, DRIVE WHEEL (Tennant Industrial)	2
5	175-0608	VR, GEAR, DRIVE (Tennant Industrial)	1
6	175-0609	VR, BOLT, GEARBOX, DRIVE WHEEL (Tennant Industrial)	5
7	175-0610	VR, HOUSING, UPPER, GEARBOX, DRIVE WHEEL (Tennant Industria	1
8	175-0611	MOTOR, ELE, 36VDC 2000RPM 3.00HP (Tennant Industrial)	1
9	175-0612	SEAL, ORG, .139 X 02.98ID (Tennant Industrial)	1
10	999-0182	Nut 1/2-20 hex plain finish	1
11	175-0613	SCREW, SOC, M8 X 1.25 X 80, 12.9 (Tennant Industrial)	2
12	175-0614	Screw M8-1.25 x 60mm socket head (Tennant Industrial)	1
13	175-0615	Bolt M12-1.75 x 25mm hex head	6
14	275-8322	TIRE ASSY, SOLID, 16.2X6.0 5.7BC/5BOLT (Tennant Industrial)	1	(includes 15)
15	275-8323	Solid tire (Tennant Industrial) (OBSOLETE)	1
16	175-0618	NUT, WHEEL, M14-1.5 (Tennant Industrial)	5
17	175-0619	SPROCKET WLDT, #40, 96TOOTH, 7.00B (Tennant Industrial)	1
18	175-0620	BLOCK, CLIP, SPRKT, .5 0.8W 01.0L (Tennant Industrial)	4
19	175-0621	PIN, ROLL, .312D X 0.75L, .312/.318 (Tennant Industrial)	4
20	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	4
21	175-2305	Washer	4
22	175-2122	90 degree cable boot	4
23a	175-0622	PANEL, MOTOR, COVER, W/ LABEL (Tennant Industrial)	1	(includes 24-26) (before SN 005000)
23b	675-3431	PANEL, MOTOR, COVER, W/ LABEL, TEAL (Tennant Industrial)	1	(includes 24-26) (after SN 004999)
24	175-0623	SEAL, BULB, 90, 1.33 .06-.09GRIP 015.5L (Tennant Industrial	1
25	275-7442	SEAL, BULB, SD-0504 32.50LG (Tennant Industrial)	1
26	175-0625	SEAL, BULB, STR, 0.58D .06-.09GRIP 12.5L (Tennant Industria	1
27a	175-0626	BRACKET, PANL (Tennant Industrial)	1	(before SN 005000)
27b	275-9286	Panel bracket (Tennant Industrial)	1	(after SN 004999)
28	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	2
29	999-0024	Washer 5/16 flat stainless steel	8
30	999-0471	Nut M8-1.25 nylon insert lock zinc plated	2
31	999-0783	Screw M8-1.25 x 16mm hex head	4
32a	275-7335	TIRE, DRIVE, SCRBR, NON-SKID, 16.0X6.0 (Tennant Industrial)	1	(optional)
32b	175-8283	Polyurethane drive wheel (gray) (Tennant Industrial)	1	(optional)

Hydraulic Motor Breakdown Assembly - 386703

Click to enlarge

#	Part	Description	Req	Notes
0	275-8310	MOTOR, HYD, GEAR, INT (Tennant Industrial)	1	(includes 1-12)
1	175-8249	Screw	4
2	275-0945	Mounting 2-bolt flange (OBSOLETE)	1
3	175-8246	Thrust race	1
4	175-8245	Bearing thrust	1
5	275-8797	Output shaft (Tennant Industrial) (OBSOLETE)	1
6	N/A	Not available	1	(motor housing)
7	275-9070	Main drive (OBSOLETE)	1
8	N/A	Not available	1	(motor spacer)
9	375-5187	Geroler assembly	1
10	275-8798	VR, CAP, END (Tennant Industrial) (OBSOLETE)	1
11	375-5175	Cap screw	7
12	275-8800	VR, SEAL KIT, MOTOR (Tennant Industrial)	1

Hydraulic Powerunit Breakdown Assembly - 368704

Click to enlarge

#	Part	Description	Req	Notes
0	275-2527	36V hydraulic power unit (Tennant Industrial)	1	(includes 1-14)
1	275-8783	VR, MOTOR, ELE (Tennant Industrial)	1
2	275-8784	VR, PUMP ASSY, HYD (Tennant Industrial) (OBSOLETE)	1
3	275-8785	VR, COUPLING, FLEXIBLE, PUMP, HYD (Tennant Industrial)	1
4	275-8786	VR, SCREW, ADJ, PUMP, HYD (Tennant Industrial)	1
5	275-8787	VR, SPRING (Tennant Industrial)	1
6	275-8788	VR, BALL, CHECK (Tennant Industrial)	1
7	275-8789	VR, SCREW, MTG (Tennant Industrial)	4
8	275-8790	VR, WASHER, PUMP, HYD (Tennant Industrial)	4
9	275-8791	VR, ELEMENT, FLTR, OIL, HYD (Tennant Industrial)	1
10	275-8792	VR, SEAL, CUP, UPPER, PUMP, HYD (Tennant Industrial)	1
11	275-8793	VR, SEAL, CUP, LOWER, PUMP, HYD (Tennant Industrial)	1
12	275-8794	VR, RESERVOIR, PUMP, HYD (Tennant Industrial)	1
13	275-8795	VR, COVER, RESERVOIR, HYD PUMP (Tennant Industrial)	1
14	275-8796	VR, SEAL KIT, PUMP, HYD (Tennant Industrial)	1

Instrument Panel Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	175-0560	PANEL, INSTMT (Tennant Industrial)	1
2	999-1261	Washer M6 flat stainless steel	4
3	175-0562	SCREW, FLT, SOC, M6 X 1.00 X 20, 10.9 (Tennant Industrial)	4
4a	275-2455	Touch panel assembly (Tennant Industrial)	1	(includes 5) (before SN 005352)
4b	275-2456	Touch panel assembly (Tennant Industrial)	1	(includes 5) (after SN 005351)
5	175-0564	CABLE, RIBBON, 36.0L [34 COND, SHIELDED] (Tennant Industria	1
6	175-3218	Push switch SPST	1
7	999-0469	Nut M6-1 nylon insert lock zinc plated	2
8	999-1087	Bolt M6-1 x 25mm hex head stainless steel	2
9	999-0016	Washer 1/4 flat plain finish	2
10	175-0565	CLAMP, CABLE, RIBBON, BASE, .6W 2.7L (Tennant Industrial)	1
11	175-0566	CLAMP, CABLE, RIBBON, HOLD-DOWN .6W 2.9L (Tennant Industria	1
12	175-2894	Nut M5-.8 hex nylon locking	4
13	999-0006	Washer 3/16 flat zinc plated	4
14	175-3220	Push switch	1	(before SN 005031)
15	175-0567	ALARM, AUDIO, 10-48VDC [MALLORY] (Tennant Industrial)	1
16	175-3214	Key switch	1	(includes 17a)
17a	175-3215	Key (sold individually)	1	(OEM)
17b	991-3066	Key	1	(NON-OEM)
18	175-0568	GROMMET, RIBBON CABLE, .63 X 1.81 (Tennant Industrial)	1
19	175-2216	Diode plug	7
20	175-2366	Rubber grommet	1
21	175-2537	Switch plug	2
22	175-3221	Switch contact	1	(before SN 005031)
23	175-0569	Rocker switch	1
24	175-3220	Push switch	1	(after SN 005030)
25	175-9375	Hole plug	2	(after SN 005953)

Left Side Brush Mount Assembly

Click to enlarge

#	Part	Description	Req	Notes
1a	675-4212	BRACKET, HSNG, BRUSH (Tennant Industrial)	1	(before SN 005000)
1b	675-4890	BRACKET, HSNG, BRUSH, IRON GRAY (Tennant Industrial)	1	(after SN 004999)
2	999-1372	Bolt M10-1.5 x 25mm hex head stainless steel	5
3	999-0355	175-2249	5
4	999-1120	Nut M10-1.5 nylon insert lock stainless steel	2
5a	375-5186	Brush housing weldment (OBSOLETE)	1	(before SN 005000)
5b	675-2933	HOUSING WLDT, BRUSH, IRON GRAY (Tennant Industrial)	1	(after SN 004999)
6	275-0443	Screw M8-1.25 x 25 button head stainless steel	4
7	999-0355	175-2249	4
8	999-0665	Nut M8-1.25 flange lock	2
9	275-8376	LABEL, INFO, BRUSH, SIDE, ADJ (Tennant Industrial)	1
10	175-3233	Cable tie mount	1
11	175-2162	Nylon wire tie	2

Left Side Brush Wire Harness Assembly

Click to enlarge

#	Part	Description	Req	Notes	Availability
1	575-7183	HARNESS, BRUSH, SIDE, LH (Tennant Industrial)	1

Left Side Squeegee Assembly - Cylindrical - Max Pro 1200

Click to enlarge

#	Part	Description	Req	Notes
1a	275-8658	GUARD WLDT, LH (Tennant Industrial)	1	(before SN 005000)
1b	275-2575	Left hand guard weldment (gray) (Tennant Industrial)	1	(after SN 004999)
2	275-2936	SCREW, HEX, M12 X 1.75 X 50, SS (Tennant Industrial)	2
3	999-0519	Nut M12-1.75 nylon insert lock stainless steel	2
5a	275-8659	ARM WLDT, FRONT, LH (Tennant Industrial)	1	(before SN 05000)
5b	275-2576	Left hand front arm weldment (gray) (Tennant Industrial)	1	(after SN 004999)
6	175-3460	Flanged bushing	1
7	175-3349	Sleeved bushing	3
8	175-3347	Washer .61 thrust	7
9	999-0355	175-2249	4
10	999-1415	Screw M8-1.25 x 12mm hex head stainless steel	4
11a	275-8660	ARM WLDT, REAR, LH (Tennant Industrial)	1	(before SN 005000)
11b	275-2577	Left hand rear arm weldment (gray) (Tennant (Industrial)	1	(after SN 004999)
12	175-0778	FRAME WLDT, SQGE, SIDE, LH (Tennant Industrial)	1
13	175-2969	BLADE ASSY, SQGE, 28.6L (Tennant Industrial)	1
14	175-0774	GUIDE, POINT, SQGE, SIDE (Tennant Industrial)	1
15	175-3357	Squeegee blade retainer	1
16	175-0775	Clevis pin (Tennant Industrial)	1
17	175-7107	Cotter hair pin	1
18	175-0770	Extension spring	2
19	175-0772	BOLT, EYE, M8 X 1.25 X 070MM, 05.50 EYE (Tennant Industrial	2
20	999-1424	Nut M8-1.25 hex stainless steel	4
21	275-0146	PIN, CLEVIS, 0.37D X 0.75L (Tennant Industrial)	2
22	275-2574	Iron arm latch (gray) (Tennant Industrial)	2
23	175-8867	SCREW, HEX, M6 X 1.00 X 12, SS (Tennant Industrial)	2
24	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	2
25	175-0768	PIN, ROLL, .250D X 0.75L, .250/.256 (Tennant Industrial)	2
26	275-8661	LATCH (Tennant Industrial)	1
27	999-0334	Bolt 1/4-20 x 3/4 inch hex head stainless steel	4

Left Side Squeegee Assembly - Cylindrical - Max Pro 1000

Click to enlarge

#	Part	Description	Req	Notes
1a	275-8658	GUARD WLDT, LH (Tennant Industrial)	1	(before SN 005000)
1b	275-2575	Left hand guard weldment (gray) (Tennant Industrial)	1	(after SN 004999)
2	275-2936	SCREW, HEX, M12 X 1.75 X 50, SS (Tennant Industrial)	2
3	999-0519	Nut M12-1.75 nylon insert lock stainless steel	2
5a	275-8659	ARM WLDT, FRONT, LH (Tennant Industrial)	1	(before SN 005000)
5b	275-2576	Left hand front arm weldment (gray) (Tennant Industrial)	1	(after SN 004999)
6	175-3460	Flanged bushing	1
7	175-3349	Sleeved bushing	3
8	175-3347	Washer .61 thrust	7
9	999-0355	175-2249	4
10	999-1415	Screw M8-1.25 x 12mm hex head stainless steel	4
11a	275-8660	ARM WLDT, REAR, LH (Tennant Industrial)	1	(before SN 005000)
11b	275-2577	Left hand rear arm weldment (gray) (Tennant (Industrial)	1	(after SN 004999)
12	175-0778	FRAME WLDT, SQGE, SIDE, LH (Tennant Industrial)	1
13	175-2969	BLADE ASSY, SQGE, 28.6L (Tennant Industrial)	1
14	175-0774	GUIDE, POINT, SQGE, SIDE (Tennant Industrial)	1
15	175-3357	Squeegee blade retainer	1
16	175-0775	Clevis pin (Tennant Industrial)	1
17	175-7107	Cotter hair pin	1
18	175-0770	Extension spring	2
19	175-0772	BOLT, EYE, M8 X 1.25 X 070MM, 05.50 EYE (Tennant Industrial	2
20	999-1424	Nut M8-1.25 hex stainless steel	4
21	275-0146	PIN, CLEVIS, 0.37D X 0.75L (Tennant Industrial)	2
22	275-2574	Iron arm latch (gray) (Tennant Industrial)	2
23	175-8867	SCREW, HEX, M6 X 1.00 X 12, SS (Tennant Industrial)	2
24	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	2
25	175-0768	PIN, ROLL, .250D X 0.75L, .250/.256 (Tennant Industrial)	2
26	275-8661	LATCH (Tennant Industrial)	1
27	999-0334	Bolt 1/4-20 x 3/4 inch hex head stainless steel	4

Left Side Squeegee Assembly - Disc - Max Pro 1000

Click to enlarge

#	Part	Description	Req
1	175-0771	Squeegee side arm frame weldment (gray) (Tennant Industrial	2
2	175-0768	PIN, ROLL, .250D X 0.75L, .250/.256 (Tennant Industrial)	2
3	175-3349	Sleeved bushing	3
4	175-0769	SLEEVE, P/M, 0.34B 0.63D 0.5L [316SS] (Tennant Industrial)	4
5	175-3347	Washer .61 thrust	7
6	999-0355	175-2249	7
7	999-0786	Screw M8-1.25 x 35mm hex head stainless steel	2
8	999-0496	Nut M8-1.25 nylon insert lock stainless steel	2
9	175-3460	Flanged bushing	1
10	999-0355	175-2249	2
11	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	2
12	175-0770	Extension spring	2
13	202-3501	Ring pin	2
14	175-0772	BOLT, EYE, M8 X 1.25 X 070MM, 05.50 EYE (Tennant Industrial	2
15	999-1424	Nut M8-1.25 hex stainless steel	4
16	175-0778	FRAME WLDT, SQGE, SIDE, LH (Tennant Industrial)	1
17	175-2969	BLADE ASSY, SQGE, 28.6L (Tennant Industrial)	1
18	175-3357	Squeegee blade retainer	1
19	175-0774	GUIDE, POINT, SQGE, SIDE (Tennant Industrial)	1
20	175-0775	Clevis pin (Tennant Industrial)	1
21	175-2113	Cotter pin	1
22	175-0776	BRACKET, LATCH, DBL SCB, SQGE, SIDE (Tennant Industrial)	2
23	999-1312	Screw M6-1 x 20mm hex head stainless steel	2
24	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	4
25	175-0777	P/M sleeve	2
26	999-0497	Nut M6-1 nylon insert lock stainless steel	2

Left Side Squeegee Assembly - Disc - Max Pro 1200

Click to enlarge

#	Part	Description	Req
1	175-0771	Squeegee side arm frame weldment (gray) (Tennant Industrial	2
2	175-0768	PIN, ROLL, .250D X 0.75L, .250/.256 (Tennant Industrial)	2
3	175-3349	Sleeved bushing	3
4	175-0769	SLEEVE, P/M, 0.34B 0.63D 0.5L [316SS] (Tennant Industrial)	4
5	175-3347	Washer .61 thrust	7
6	999-0355	175-2249	7
7	999-0786	Screw M8-1.25 x 35mm hex head stainless steel	2
8	999-0496	Nut M8-1.25 nylon insert lock stainless steel	2
9	175-3460	Flanged bushing	1
10	999-0355	175-2249	2
11	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	2
12	175-0770	Extension spring	2
13	202-3501	Ring pin	2
14	175-0772	BOLT, EYE, M8 X 1.25 X 070MM, 05.50 EYE (Tennant Industrial	2
15	999-1424	Nut M8-1.25 hex stainless steel	4
16	175-0778	FRAME WLDT, SQGE, SIDE, LH (Tennant Industrial)	1
17	175-2969	BLADE ASSY, SQGE, 28.6L (Tennant Industrial)	1
18	175-3357	Squeegee blade retainer	1
19	175-0774	GUIDE, POINT, SQGE, SIDE (Tennant Industrial)	1
20	175-0775	Clevis pin (Tennant Industrial)	1
21	175-2113	Cotter pin	1
22	175-0776	BRACKET, LATCH, DBL SCB, SQGE, SIDE (Tennant Industrial)	2
23	999-1312	Screw M6-1 x 20mm hex head stainless steel	2
24	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	4
25	175-0777	P/M sleeve	2
26	999-0497	Nut M6-1 nylon insert lock stainless steel	2

Low Water Level Assembly

Click to enlarge

#	Part	Description	Req	Notes	Availability
0	275-8699	INDICATOR KIT, LOW WATER LEVEL, CI (Tennant Industrial)	1	(includes 1)
1	275-8326	SWITCH KIT, PRESS, W/34INCH TUBE, REPLMT (Tennant Industria	1

Main Frame Assembly

Click to enlarge

#	Part	Description	Req	Notes
1a	275-9051	FRAME WLDT, MAIN [7300/8300] (Tennant Industrial)	1	(before SN 005000)
1b	175-0521	Main weldment frame (gray) (Tennant Industrial) (OBSOLETE)	1	(after SN 004999)
2a	175-0522	PLATE, COVER (Tennant Industrial)	1	(before SN 005000)
2b	275-2451	Cover plate (iron gray) (Tennant Industrial)	1	(after SN 004999)
3	175-0523	RIVET, PLSTC, .250D X 0.75 (Tennant Industrial)	24
4a	175-0524	Headlight	2	(includes 4b)
4b	175-3165	Lamp	1
5a	675-0389	TAILLIGHT, 12VDC, 3.6 X 1.9, RWK 1075205 (Tennant Industrial	2	(includes 5b-5c)
5b	175-0526	LAMP, 12VDC, 0.3A, 02CP [#194] (Tennant Industrial)	1
5c	175-0527	LAMPHOLDER (Tennant Industrial)	1
6	999-0502	Bolt M6-1 x 20mm hex head full thread zinc	2
7a	175-0528	BUMPER WLDT (Tennant Industrial)	1	(before SN 005000)
7b	275-2452	Bumper weldment (iron gray) (Tennant Industrial)	1	(after SN 004999)
8	175-0529	Wheel	10
9	175-0530	PIN, CLEVIS, 0.75D X 6.50L (Tennant Industrial)	2
10	999-0630	Washer 3/4 SAE flat	2
11	175-0532	Cotter pin	2
12	999-0355	175-2249	8
13	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	8
14a	175-0533	CHANNEL WLDT, STEERING (Tennant Industrial) (OBSOLETE)	1	(before SN 005000)
14b	275-2453	Channel weldment (iron gray) (Tennant Industrial)	1	(after SN 004999)
15	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	5
16	999-0471	Nut M8-1.25 nylon insert lock zinc plated	5
17	999-0024	Washer 5/16 flat stainless steel	12
18	175-0534	T3026 WLDT, FLOOR (Tennant Industrial) (OBSOLETE)	1	(before SN 001947)
19	999-0783	Screw M8-1.25 x 16mm hex head	12
20a	175-0535	PLATE, FLOOR, UPPER (Tennant Industrial)	1	(before SN 005000)
20b	275-2454	Upper floor plate (iron gray) (Tennant Industrial)	1	(after SN 004999)
21	175-3168	P clamp	1
22	999-0665	Nut M8-1.25 flange lock	2
23	175-3160	Horn	1
24	175-0536	Bolt M6-1 x 20mm hex head thread forming	1
25	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	1
26	999-0460	Nut 10-32 hex	4
27	999-0089	Washer #10 internal star lock zinc plated	4
28	175-3168	P clamp	2
29	175-3166	Bolt M6-1 x 16mm hex head	2
30a	275-8293	PLATE, FLOOR (Tennant Industrial)	1	(between SN 001947 and SN 004999)
30b	275-9281	Floor plate (iron gray) (Tennant Industrial)	1	(after SN 004999)

Main Wire Harness Assembly

Click to enlarge

#	Part	Description	Req	Notes
1a	175-0878	HARNESS, MAIN [7300/8300] (Tennant Industrial)	1	(before SN 001406)
1b	175-0879	HARNESS, MAIN [7300/8300] (Tennant Industrial)	1	(after SN 001405)
2	275-8555	HARNESS, JUMPER, SEAT, SWITCH (Tennant Industrial)	1
3	275-8556	HARNESS, JUMPER, ARM, LIFT [355L] (Tennant Industrial)	2

Metering Solution Pump Breakdown Assembly - 386364

Click to enlarge

#	Part	Description	Req	Notes
0	275-8706	PUMP, DETGT, 36VDC (Tennant Industrial)	1	(includes 1-4)
1	575-7563	VR, CONNECTOR KIT, TUBE [GORMAN PUMP] (Tennant Industrial)	1
2	675-0406	VR, VALVE KIT, POPPET [GORMAN RUPP] (Tennant Industrial)	1
3	675-2727	VR, BELLOWS KIT [MOd (Tennant Industrial)	1
4	675-0182	VR, CRANK KIT, PUMP, F/79323, REPLM (Tennant Industrial)	1

Overhead Guard Assembly

Click to enlarge

#	Part	Description	Req	Notes
0a	275-2546	Overhead guard kit (gray) (Tennant Industrial)	1	(includes 1a, 2a, 3a, 4-8) (after SN 004999)
0b	275-8580	OHG KIT, CI [7300/8300] (Tennant Industrial)	1	(includes 1b, 2b, 3b, 4-8) (before SN 005000)
1a	275-2547	Top guard weldment (gray) (Tennant Industrial)	1	(after SN 004999)
1b	275-8581	GUARD WLDT, OPRTR, TOP (Tennant Industrial)	1	(before SN 005000)
2a	275-2548	Right hand guard tube weldment (Tennant Industrial)	1	(after SN 004999)
2b	275-8582	TUBE, OHG, OPRTR, RH, PNTD (Tennant Industrial)	1	(before SN 005000)
3a	275-2549	Left hand guard tube weldment (Tennant Industrial)	1	(after SN 004999)
3b	275-8583	TUBE, OHG, OPRTR, LH, PNTD (Tennant Industrial)	1	(before SN 005000)
4	175-6774	Screw M10-1 1/2 x 20 hex	8
5	999-0032	Washer 3/8 USS flat plain finish	16
6	999-1120	Nut M10-1.5 nylon insert lock stainless steel	8
7	999-1372	Bolt M10-1.5 x 25mm hex head stainless steel	8
8	999-0355	175-2249	8

Positive Solution Control Drain Assembly - Recovery Tank

Click to enlarge

#	Part	Description	Req	Notes
0a	275-8693	DRAIN KIT, CI [POSI CNTRL/RECVY ONLY] (Tennant Industrial)	1	(includes 1a-16a) (before SN 005000)
0b	275-7345	DRAIN KIT, GRAY, CI [POSI CNTRL/RECVY] (Tennant Industrial)	1	(includes 1a-15, 16b) (after SN 004999)
1a	275-9055	Cap assembly (Tennant Industrial)	1	(includes 1b-2)
1b	275-4302	Dust cap	1
2	275-8694	Dust cap gasket	1
3	175-9747	Female shank hose coupler fitting	1
4	275-4304	CHAIN, SASH, 35, 07.2L 13 LINK (Tennant Industrial)	1
5	275-2606	Drain valve (Tennant Industrial)	1
6	175-3384	Tank cap	1
7	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	3
8	175-8867	SCREW, HEX, M6 X 1.00 X 12, SS (Tennant Industrial)	3
9	275-4679	Gasket	1
10	175-9746	Washer flat 1.91b 4.38d .13 polyethylene	1
11	175-9748	Hose assembly with 1 cuff	1
12	175-0791	Nut M10 x 1.5 hex flange	2
13	175-3298	Bolt M6-1 x 12mm hex head	1
14	999-0032	Washer 3/8 USS flat plain finish	2
15	175-3258	Bolt M10-1.5 x 35mm hex head	2
16a	275-8696	BUMPER, SIDE, RECVY [POSI DRAIN] (Tennant Industrial)	1	(before SN 005000)
16b	275-2607	Recovery side bumper (gray) (Tennant Industrial)	1	(after SN 004999)

Positive Solution Control Drain Assembly - Solution Tank

Click to enlarge

#	Part	Description	Req	Notes
0a	275-8697	DRAIN KIT, CI [POSI CNTRL/SOLTN ONLY] (Tennant Industrial)	1	(includes 1-11a, 12-16) (before SN 005000)
0b	275-2608	Drain kit (gray) (Tennant Industrial)	1	(includes 1-10, 11b-16) (after SN 004999)
1	275-4302	Dust cap	1	(includes 2)
2	275-8694	Dust cap gasket	1
3	175-9747	Female shank hose coupler fitting	1
4	275-4304	CHAIN, SASH, 35, 07.2L 13 LINK (Tennant Industrial)	1
5	275-2606	Drain valve (Tennant Industrial)	1
6	175-3384	Tank cap	1
7	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	3
8	175-8867	SCREW, HEX, M6 X 1.00 X 12, SS (Tennant Industrial)	3
9	275-4679	Gasket	1
10	175-9746	Washer flat 1.91b 4.38d .13 polyethylene	1
11a	275-8698	BUMPER, SIDE, SOLTN [POSI DRAIN] (Tennant Industrial)	1	(before SN 005000)
11b	275-2609	Solution side bumper (gray) (Tennant Industrial)	1	(after SN 004999)
12	175-0791	Nut M10 x 1.5 hex flange	2
13	175-3298	Bolt M6-1 x 12mm hex head	1
14	999-0032	Washer 3/8 USS flat plain finish	2
15	175-3258	Bolt M10-1.5 x 35mm hex head	2
16	175-9748	Hose assembly with 1 cuff	1

Power Steering Assembly

Click to enlarge

#	Part	Description	Req	Notes
1a	275-7953	Steering wheel (Tennant Industrial)	1	(includes 1b)
1b	275-2812	COVER, STEERING WHEEL (Tennant Industrial)	1
2	275-2813	NUT, HEX, JAM, M20 X 1.5 (Tennant Industrial)	1
3a	275-9082	STEERING KIT, POWER, CI [7300/8300] (Tennant Industrial)	1	(includes 3b-3c) (before SN 001838)
3b	275-8318	VR, CAP, TUBE (Tennant Industrial)	1	(before SN 001838)
3c	575-6870	VR, SEAL KIT, SCU (Tennant Industrial)	1	(before SN 001838)
5	275-0302	Screw M10-1.5 x 16 hex head	3	(before SN 001838)
6	175-8103	FITTING, HYD, STR, JM06/OM06 (Tennant Industrial)	3
7	175-6968	FITTING, HYD, STR, JM04/OM06 (Tennant Industrial)	2
8	275-7954	Steering bracket weldment (Tennant Industrial)	1
9	275-2808	BEARING, FLNG, 2HOLE, 0.50B (Tennant Industrial)	2
10	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	4
11	275-8310	MOTOR, HYD, GEAR, INT (Tennant Industrial)	1
12	275-8311	FITTING, HYD, STR, JM04/OM10 (Tennant Industrial)	2
13	275-8431	SCREW, SOC, M12 X 1.75 X 45, 12.9 (Tennant Industrial)	2
14	999-0114	Washer 1/2 SAE flat	4
15	275-8313	BUSHING, TLB (Tennant Industrial)	1
16	275-8314	SPROCKET, 40, 24TOOTH, TLB, 1.87B 0.81W (Tennant Industrial	1
17	275-8315	CHAIN, RLR, 40 X 109 PITCHES (Tennant Industrial)	1
18	999-0519	Nut M12-1.75 nylon insert lock stainless steel	2
19	175-0583	LINK, CHAIN, RLR, 40 (Tennant Industrial)	1
20	575-6899	PLATE, MTG, HYD, IRON GRAY (Tennant Industrial)	1
21	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	8
22	999-0024	Washer 5/16 flat stainless steel	8
23	275-2527	36V hydraulic power unit (Tennant Industrial)	1	(before SN 006050)
24	999-0665	Nut M8-1.25 flange lock	4
25	575-3554	FITTING, HYD, TEE, JM06/JM06/OM06, BR (Tennant Industrial)	1	(before SN 006050)
26	175-7214	Hydraulic fitting	1	(before SN 006050)
27	275-8312	HANDLE WLDT, STEERING, TILT (Tennant Industrial)	1
28	175-2373	36V contactor	1
29	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	2
30	999-0016	Washer 1/4 flat plain finish	2
31a	275-8538	PLATE, MTG, CONTACTOR (Tennant Industrial)	1	(before SN 005000)
31b	275-2532	Contactor mounting plate (gray) (Tennant Industrial)	1
32	175-0849	Nut 5/16-24 hex	2
33	999-0406	Washer 5/16 internal star lock zinc plated	2
34	999-0549	Washer 5/16 x 3/4 SAE flat stainless steel	2
35	999-0460	Nut 10-32 hex	2
36	999-1026	Washer #10 internal lock stainless steel	2
37	999-0006	Washer 3/16 flat zinc plated	2
38	175-3436	Bolt 8mm-1.25 x 40mm hex head	1
39a	275-8317	COLUMN, STEERING, 14.0L .81D 36TOOTH (Tennant Industrial)	1	(includes 39c) (between SN 001838 and SN 005845)
39b	275-7955	Steering column (Tennant Industrial)	1	(after SN 005845)
39c	275-8318	VR, CAP, TUBE (Tennant Industrial)	1
40	275-8319	STEER-CONTROL, HYD05, 05.0 2030 (Tennant Industrial)	1	(after SN 001837)
41	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	4	(after SN 001837)
42	275-2527	36V hydraulic power unit (Tennant Industrial)	1	(after SN 006049)
43	175-8103	FITTING, HYD, STR, JM06/OM06 (Tennant Industrial)	2	(after SN 006049)
44	375-0977	E90 hydraulic fitting (Tennant Industrial)	1	(after SN 006049)
45	275-9635	FITTING, HYD, TEE, JF06/JM06/JM06, RUN (Tennant Industrial)	1	(after SN 006049)

Power Steering Hydraulic Hose Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	175-7177	HOSE, HYD, TC04, JF04E90/JF04STR, 030.0 (Tennant Industrial	2
2	275-8529	HOSE, HYD, TC06, JF06E90/JF06STR, 048.0 (Tennant Industrial	1
3	275-8529	HOSE, HYD, TC06, JF06E90/JF06STR, 048.0 (Tennant Industrial	2	(before SN 006050)
4	575-6341	HOSE, HYD, TC06, JF06E90/JF06STR, 050.0 (Tennant Industrial)	1	(after SN 006049)
5	N/A	Not available	1	(hose) (after SN 006049)

Power Wand Assembly

Click to enlarge

#	Part	Description	Req	Notes
0	175-8759	Deluxe power wand assembly	1	(includes 1-27)
1	175-6380	Valve mounting bracket	1
2	175-6353	Head and wand adapter	2
3	175-1662	90 degree elbow fitting	1
4	175-6354	Spray nozzle adapter	1
5	175-6355	Pop rivet	2
6	175-6356	Spray nozzle	1
7	175-9734	Polypropylene power wand brush with fastener (OBSOLETE)	1
8	175-6358	Wand head (OBSOLETE)	1
9	175-6361	Squeegee blade retainer	2
10	175-6362	Squeegee blade 17 inch	2
11	175-6363	Axle bracket	1
12	175-1384	Thumb nut	1
13	175-6364	Compression spring	1
14	175-6366	Adjustment stud	1
15	175-6368	Axle	1
16	175-6369	Wheel (rubber)	2
17	175-6370	Axle bracket	1
18	175-6371	Wand handle	1
19	175-6373	Handle bracket	1
20	175-6374	Male quick connect plug	1
21	175-6376	Grommet	1
22	175-6377	Solution hose	1
23	175-6378	Hose clamp	2
24	175-6379	1/4 inch hose barb fitting	1
25	175-1683	Water control valve	1
26	175-6121	Brass plug	1
27	175-6351	Double bend wand	1
28	996-1269	Abrasive power wand brush with fastener	1

Power Wand Hose Assembly

Click to enlarge

#	Part	Description	Req	Notes
0	175-8757	Power wand hose assembly	1	(includes 1-6)
1	175-6345	Quick connect male fitting	1
2	175-6346	Hose clamp	2
3	175-6347	Hose 1/4 inch x 13 foot	1
4	175-6348	1 1/2 inch swivel cuff	2
5	175-6349	Vacuum hose 1 1/2 x 10 foot	1
6	175-6350	Quick connect female connector	1
7	275-4267	FITTING, PLSTC, STR, BM24/BM32 (Tennant Industrial)	1

Power Wand Mount Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	275-3319	Switch	1
2	175-9416	Power bag	1
3	175-3378	Rivet 1/4 x 57/64 plastic	2
4	275-3939	CLIP, GRIP, FINGER, 1.00-1.88D,WHITE VYL (Tennant Industria	1
5	175-3291	SCREW, HEX, M4 X 0.70 X 20, 8.8 (Tennant Industrial)	1
6	999-0377	Washer 6 SAE flat plain finish	2
7	999-0954	Nut M4-.7 nylon insert lock stainless steel	1
8a	275-8716	TRAY WLDT, POWER WAND (Tennant Industrial)	1	(before SN 005000)
8b	275-2614	Power wand tray weldment (gray) (Tennant Industrial)	1	(after SN 004999)
9	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	3
10a	275-8718	HARNESS, WAND, POWER [7300/8300] (Tennant Industrial)	1	(after SN 001705)
10b	275-8717	HARNESS, WAND, POWER [7300/8300] (Tennant Industrial)	1	(before SN 001706)
11	175-2162	Nylon wire tie	4	(before SN 001706)
12	999-0355	175-2249	3

Power Wand Pump and Fittings Assembly

Click to enlarge

#	Part	Description	Req
1	275-2585	Iron mounting angle (gray) (Tennant Industrial)	1
2	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	4
3	999-0355	175-2249	2
4	175-9723	Brass female quick connect fitting	1
5	175-4814	Brass strainer fitting	1
6	275-2612	Power wand bracket (gray) (Tennant Industrial)	1
7	999-0496	Nut M8-1.25 nylon insert lock stainless steel	2
8	275-4310	FITTING, PLSTC, STR, BM08/PM04 (Tennant Industrial)	1
9	175-6081	Hose clamp	4
10	275-4311	HOSE, PVC, WIR, 0.50ID 0.74OD 037.0L,CLR (Tennant Industria	1
11	275-4308	FITTING, PLSTC, E90, BM08/PM04 (Tennant Industrial)	2
12	275-8715	PUMP ASSY, WAND, POWER (Tennant Industrial)	1
13	999-1087	Bolt M6-1 x 25mm hex head stainless steel	4
14	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	4
15	999-0497	Nut M6-1 nylon insert lock stainless steel	4
16	275-2613	PVC hose (Tennant Industrial)	1
17	175-2523	Plastic fitting	1

Rear Bumper Assembly

Click to enlarge

#	Part	Description	Req	Notes
0a	275-2536	Rear bumper kit (Tennant Industrial)	1	(includes 1a, 2a, 3-5) (after SN 004999)
0b	275-8577	BUMPER KIT, REAR, CI (Tennant Industrial)	1	(includes 1b, 2b, 3-5) (before SN 005000)
1a	275-2537	Right hand rear bumper (gray) (Tennant Industrial)	1	(after SN 004999)
1b	275-8578	BUMPER, REAR, RH (Tennant Industrial)	1	(before SN 005000)
2a	275-2538	Left hand rear bumper (gray) (Tennant Industrial)	1	(after SN 004999)
2b	275-8579	BUMPER, REAR, LH (Tennant Industrial)	1	(before SN 005000)
3	999-1372	Bolt M10-1.5 x 25mm hex head stainless steel	6
4	999-0355	175-2249	6
5	999-1120	Nut M10-1.5 nylon insert lock stainless steel	2

Rear Cover Assembly

Click to enlarge

#	Part	Description	Req	Notes
1a	175-0545	COVER, TANK, TOP (Tennant Industrial)	1	(before SN 005000)
1b	275-9269	Top tank cover (teal) (Tennant Industrial)	1	(after SN 004999)
2a	175-0546	COVER, REAR (Tennant Industrial)	1	(before SN 005000)
2b	275-9270	Rear cover (teal) (Tennant Industrial)	1	(after SN 004999)
3a	175-0547	PLATE, HINGE (Tennant Industrial)	2	(before SN 005000)
3b	275-9271	Hinge plate (iron gray) (Tennant Industrial)	2	(after SN 004999)
4a	175-0548	HINGE WLDT, W/ PIN (Tennant Industrial)	2	(before SN 005000)
4b	275-9272	Hinge weldment with pin (iron gray) (Tennant Industrial)	2	(after SN 004999)
5a	175-0549	HINGE ASSY (Tennant Industrial)	2	(before SN 005000)
5b	275-9273	Hinge assembly (iron gray) (Tennant Industrial)	2	(after SN 004999)
6	999-0355	175-2249	24
7	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	23
8a	375-7802	Latch	1	(OEM)
8b	991-8561	Rubber draw latch with keeper	1	(NON-OEM)
9	999-0954	Nut M4-.7 nylon insert lock stainless steel	4
10	999-0534	Screw M4-.7 x 10mm pan head slotted zinc	4
11	175-0550	Sleeve	1
12	175-0551	ROD (Tennant Industrial)	1
13a	175-0552	PLATE (Tennant Industrial)	1	(before SN 005000)
13b	275-9274	Plate (iron gray) (Tennant Industrial)	1	(after SN 004999)
14	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	3
15a	175-0553	COVER WLDT (Tennant Industrial)	1	(before SN 005000)
15b	275-9275	Cover weldment (iron gray) (Tennant Industrial)	1	(after SN 004999)
16	175-0554	PANEL, FRONT, W/ LABEL (Tennant Industrial)	1
17	175-0555	ROD, DOOR, REAR (Tennant Industrial)	1
18	175-0556	SPRING, CMPR, 0.36OD .04WIR 02.5L (Tennant Industrial)	1
19	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	2
20	175-2361	Cotter pin	1
21	275-7952	Iron bracket (Tennant Industrial)	1
22	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	2
23	175-0558	CAP, VYL, .23ID .750L, BLK (Tennant Industrial)	1
24	175-0559	P clamp	2

Rear Squeegee Assembly - Max Pro 1000

Click to enlarge

#	Part	Description	Req	Notes
0a	175-0809	SQUEEGEE ASSY KIT, REAR, CI [MP1000] (Tennant Industrial)	1	(includes 1-2a, 3-19, 20a, 21a, 22-34)
0b	275-9344	Rear squeegee kit assembly (Tennant Industrial)	1	(includes 1-2a, 3-19, 20b, 21b, 22-34)
1	275-2612	Power wand bracket (gray) (Tennant Industrial)	1
2a	175-0811	BLADE, SQGE, FRONT, 49.00L linatex (Tennant Industrial)	1
2b	175-0833	BLADE, SQGE, FRONT, TILE, 49.00L linatex (Tennant Industria	1
3	175-0812	CLAMP WLDT, FRONT (Tennant Industrial)	1
4	175-0813	PIN, GRVD, 0.43D 01.8L [303SS] (Tennant Industrial)	4
5	175-0814	Retaining ring (Tennant Industrial)	4
6	175-0815	PIN WLDT, FRONT (Tennant Industrial)	1
7	375-4391	Front cam (yellow) (Tennant Industrial)	1
8	175-0816	BLADE, SQGE, REAR, 51.38L linatex (Tennant Industrial)	1
9	175-0817	CLAMP WLDT, REAR (Tennant Industrial)	1
10	175-0818	BAR WLDT, RETAINER, SQGE, REAR (Tennant Industrial)	1
11	175-0819	CAM, REAR (Tennant Industrial)	1
12	175-0820	STRIP, NON SLIP, 0.50W 06.0L (Tennant Industrial)	4
13	175-0821	GASKET, SQGE (Tennant Industrial)	2
14	175-3484	BUMPER, SQGE (Tennant Industrial)	2
15	175-0822	SCREW, HEX, M8 X 1.25 X 100, SS (Tennant Industrial)	1
16	999-0355	175-2249	5
17	175-2207	Sleeve	1
18	999-0496	Nut M8-1.25 nylon insert lock stainless steel	2
19	999-0909	Bolt M8-1.25 x 70mm hex head stainless steel	1
20a	175-0823	CHANNEL WLDT, GUARD, RH (Tennant Industrial)	1	(before SN 005000)
20b	275-9345	Channel weldment (iron gray) (Tennant Industrial)	1	(after SN 04999)
21a	175-0824	PLATE WLDT, PIVOT, GUARD (Tennant Industrial)	1	(before SN 005000)
21b	275-9346	Guard pivot plate weldment (iron gray) (Tennant Industrial)	1	(after SN 04999)
22	999-6696	Bolt M12-1.75 x 30mm stainless steel hex cap screw	2
23	999-0114	Washer 1/2 SAE flat	2
24	999-0519	Nut M12-1.75 nylon insert lock stainless steel	2
25	275-7974	Clevis pin 1/4 x 2 (Tennant Industrial)	1
26	175-2361	Cotter pin	1
27	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	2
28	175-0828	Stud 5/16-18 (Tennant Industrial)	2
29	175-2208	Plastic star knob	2
30	175-3470	Washer .53b 1.88d .12 steel plated	2
31	175-0829	RING, MTG, SQGE, .50L (Tennant Industrial)	2
32	175-0830	SPRING, CMPR, 0.90OD .04WIR 02.0L (Tennant Industrial)	2
33	175-0831	STRIP, BMPR, PYE, .06 1.75W 22.0L (Tennant Industrial)	1
34	175-0832	STRIP, BMPR, PYE, .06 0.75W 01.5L (Tennant Industrial)	1

Rear Squeegee Assembly - Max Pro 1200

Click to enlarge

#	Part	Description	Req	Notes
0a	275-8721	SQUEEGEE ASSY KIT, REAR, CI [MP1200] (Tennant Industrial)	1	(includes 1-2a, 3-20a, 21a, 22-41a, 42a, 43-46) (before SN 005000)
0b	275-2644	Squeegee assy 48 inch (1200mm) rear linatex (Tennant Ind)	1	(includes 1-2a, 3-19, 20b 21b, 22-40, 41b, 42b, 43-46) (after SN 004999)
1	275-2643	Squeegee frame weldment (Tennant Industrial)	1
2a	275-8723	BLADE, SQGE, FRONT, 57.00L linatex [48 inch] (Tennant Indu	1
2b	275-8729	BLADE, SQGE, FRONT, TILE, 57.00L linatex (Tennant Industria	1
3	275-8724	CLAMP WLDT, FRONT (Tennant Industrial)	1
4	175-0813	PIN, GRVD, 0.43D 01.8L [303SS] (Tennant Industrial)	4
5	175-0814	Retaining ring (Tennant Industrial)	4
6	175-0815	PIN WLDT, FRONT (Tennant Industrial)	1
7	375-4391	Front cam (yellow) (Tennant Industrial)	1
8	275-8725	BLADE, SQGE, REAR, 58.62L linatex [48 inch] (Tennant Indus	1
9	275-8732	CLAMP WLDT, REAR, 48.0L (Tennant Industrial)	1
10	175-0818	BAR WLDT, RETAINER, SQGE, REAR (Tennant Industrial)	1
11	175-0819	CAM, REAR (Tennant Industrial)	1
12	175-0820	STRIP, NON SLIP, 0.50W 06.0L (Tennant Industrial)	4
13	175-0821	GASKET, SQGE (Tennant Industrial)	2
14	175-3484	BUMPER, SQGE (Tennant Industrial)	2
15	275-8726	SCREW, HEX, M8 X 1.25 X 130, SS (Tennant Industrial)	1
16	999-0355	175-2249	5
17	175-2207	Sleeve	1
18	999-0496	Nut M8-1.25 nylon insert lock stainless steel	4
19	999-0909	Bolt M8-1.25 x 70mm hex head stainless steel	1
20a	275-8727	CHANNEL WLDT (Tennant Industrial)	1	(before SN 005000)
20b	275-2645	Iron channel weldment (gray) (Tennant Industrial)	1	(after SN 004999)
21a	175-0824	PLATE WLDT, PIVOT, GUARD (Tennant Industrial)	1	(before SN 005000)
21b	275-9346	Guard pivot plate weldment (iron gray) (Tennant Industrial)	1	(after SN 004999)
22	999-6696	Bolt M12-1.75 x 30mm stainless steel hex cap screw	2
23	999-0114	Washer 1/2 SAE flat	2
24	999-0519	Nut M12-1.75 nylon insert lock stainless steel	2
25	275-7974	Clevis pin 1/4 x 2 (Tennant Industrial)	1
26	175-2361	Cotter pin	1
27	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	2
28	175-0828	Stud 5/16-18 (Tennant Industrial)	2
29	175-2208	Plastic star knob	2
30	175-3470	Washer .53b 1.88d .12 steel plated	2
31	175-0829	RING, MTG, SQGE, .50L (Tennant Industrial)	2
32	275-8728	STRIP, BMPR, PYE, .06 1.75W 26.0L (Tennant Industrial)	1
33	175-0832	STRIP, BMPR, PYE, .06 0.75W 01.5L (Tennant Industrial)	1
34	175-0830	SPRING, CMPR, 0.90OD .04WIR 02.0L (Tennant Industrial)	2
35	275-0855	Tube	1
36	275-2208	WHEEL, 04.0D 0.89W 0.64B	1
37	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	2
38	175-0804	BOLT, EYE, M10 X 1.50 X 064MM, 07.10 EYE (Tennant Industria	1
39	175-0803	SPRING, EXTN, 1.69OD 0.20WIR 09.5L (Tennant Industrial)	1
40	999-1625	Nut M10-1.5 hex jam stainless steel	2
41a	275-8730	BRACKET, STOP, BAR, LH (Tennant Industrial)	1	(before SN 005000)
41b	275-2646	Left hand stop bar bracket (gray) (Tennant Industrial)	1	(after SN 004999)
42a	275-8731	BRACKET, STOP, BAR, RH (Tennant Industrial)	1	(before SN 005000)
42b	275-2647	Right hand stop bar bracket (gray) (Tennant Industrial)	1	(after SN 004999)
43	175-0745	BUMPER, RBR, 1.5D 0.63 0.31H (Tennant Industrial)	2
44	375-5185	Sleeve (Tennant Industrial)	4
45	175-0806	WASHER, THRUST, 0.75B 1.25D 0.06W (Tennant Industrial)	4
46	175-0808	PLATE, SLIDE (Tennant Industrial)	2

Rear Squeegee for Vacuumized Side Squeegee Assembly - Max Pro 1200

Click to enlarge

#	Part	Description	Req	Notes
0a	175-0809	SQUEEGEE ASSY KIT, REAR, CI [MP1000] (Tennant Industrial)	1	(includes 1-2a, 3-20a, 21a, 22-34) (before SN 005000)
0b	275-9344	Rear squeegee kit assembly (Tennant Industrial)	1	(includes 1-2a, 3-19, 20b, 21b, 22-34) (after SN 004999)
1	275-7973	Iron squeegee frame weldment (gray) (Tennant Industrial)	1
2a	175-0811	BLADE, SQGE, FRONT, 49.00L linatex (Tennant Industrial)	1
2b	175-0833	BLADE, SQGE, FRONT, TILE, 49.00L linatex (Tennant Industria	1
3	175-0812	CLAMP WLDT, FRONT (Tennant Industrial)	1
4	175-0813	PIN, GRVD, 0.43D 01.8L [303SS] (Tennant Industrial)	4
5	175-0814	Retaining ring (Tennant Industrial)	4
6	175-0815	PIN WLDT, FRONT (Tennant Industrial)	1
7	375-4391	Front cam (yellow) (Tennant Industrial)	1
8	175-0816	BLADE, SQGE, REAR, 51.38L linatex (Tennant Industrial)	1
9	175-0817	CLAMP WLDT, REAR (Tennant Industrial)	1
10	175-0818	BAR WLDT, RETAINER, SQGE, REAR (Tennant Industrial)	1
11	175-0819	CAM, REAR (Tennant Industrial)	1
12	175-0820	STRIP, NON SLIP, 0.50W 06.0L (Tennant Industrial)	4
13	175-0821	GASKET, SQGE (Tennant Industrial)	2
14	175-3484	BUMPER, SQGE (Tennant Industrial)	2
15	175-0822	SCREW, HEX, M8 X 1.25 X 100, SS (Tennant Industrial)	1
16	999-0355	175-2249	5
17	175-2207	Sleeve	1
18	999-0496	Nut M8-1.25 nylon insert lock stainless steel	2
19	999-0909	Bolt M8-1.25 x 70mm hex head stainless steel	1
20a	175-0823	CHANNEL WLDT, GUARD, RH (Tennant Industrial)	1	(before SN 005000)
20b	275-9345	Channel weldment (iron gray) (Tennant Industrial)	1	(after SN 004999)
21a	175-0824	PLATE WLDT, PIVOT, GUARD (Tennant Industrial)	1	(before SN 005000)
21b	275-9346	Guard pivot plate weldment (iron gray) (Tennant Industrial)	1	(after SN 004999)
22	999-6696	Bolt M12-1.75 x 30mm stainless steel hex cap screw	2
23	999-0114	Washer 1/2 SAE flat	2
24	999-0519	Nut M12-1.75 nylon insert lock stainless steel	2
25	275-7974	Clevis pin 1/4 x 2 (Tennant Industrial)	1
26	175-2361	Cotter pin	1
27	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	2
28	175-0828	Stud 5/16-18 (Tennant Industrial)	2
29	175-2208	Plastic star knob	2
30	175-3470	Washer .53b 1.88d .12 steel plated	2
31	175-0829	RING, MTG, SQGE, .50L (Tennant Industrial)	2
32	175-0830	SPRING, CMPR, 0.90OD .04WIR 02.0L (Tennant Industrial)	2
33	175-0831	STRIP, BMPR, PYE, .06 1.75W 22.0L (Tennant Industrial)	1
34	175-0832	STRIP, BMPR, PYE, .06 0.75W 01.5L (Tennant Industrial)	1

Rear Squeegee Lift Assembly

Click to enlarge

#	Part	Description	Req	Notes
1a	175-0793	SUPPORT WLDT (Tennant Industrial)	1	(before SN 005000)
1b	275-9341	Support weldment (iron gray) (Tennant Industrial)	1	(after SN 004999)
2	999-0355	175-2249	2
3	999-0774	Bolt M10-1.5 x 30mm hex head stainless steel full thread	4
4	175-0794	ACTUATOR, 36VDC, 02.1STRK, 500LB (Tennant Industrial)	1
5	175-2382	Clevis pin	1
6	175-0716	Clevis pin	2
7	175-6176	Cotter pin	5
8	175-0795	ARM WLDT (Tennant Industrial)	1
9	175-0796	Sleeve	1
10	175-3347	Washer .61 thrust	1
11	175-0784	Thrust bearing	1
12	999-1120	Nut M10-1.5 nylon insert lock stainless steel	3
13	175-0797	Washer flat	1
14	175-0792	Bolt M10-1.5 x 60mm hex head stainless steel	1
15	175-0798	DRUM, CABLE, LIFT (Tennant Industrial)	1
16	175-0799	PIN, CLEVIS, 0.25D X 2.44L (Tennant Industrial)	1
17	175-2361	Cotter pin	1
18	175-0800	CABLE, SS .12D 013.3L .2CLEVIS /.2CLEVIS (Tennant Industria	1
19	175-0801	Clevis pin	2
20	175-2094	Chain	1
21	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	1
22	999-0497	Nut M6-1 nylon insert lock stainless steel	1
23	999-1312	Screw M6-1 x 20mm hex head stainless steel	1
24a	175-0802	BRACKET, SPRING (Tennant Industrial)	1	(before SN 005000)
24b	275-9342	Spring bracket (iron gray) (Tennant Industrial)	1	(after SN 004999)
25	999-0355	175-2249	2
26	999-0496	Nut M8-1.25 nylon insert lock stainless steel	2
27	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	2
28	175-0803	SPRING, EXTN, 1.69OD 0.20WIR 09.5L (Tennant Industrial)	2
29	175-0804	BOLT, EYE, M10 X 1.50 X 064MM, 07.10 EYE (Tennant Industria	2
30	175-0805	CAP, RBR, 0.38ID 1.25L BLK (Tennant Industrial)	2
31	999-0032	Washer 3/8 USS flat plain finish	4
32	175-0806	WASHER, THRUST, 0.75B 1.25D 0.06W (Tennant Industrial)	4
33	375-5185	Sleeve (Tennant Industrial)	4
34	175-0808	PLATE, SLIDE (Tennant Industrial)	2

Rear Squeegee Linkage Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	175-0779	ROD-END, M10 X 1.5RH FEM M10 X 1.5STUD (Tennant Industrial)	8
2	175-0780	ROD, THRD, 2 END, M10 X 1.5 07.4L (Tennant Industrial)	4
3	999-1625	Nut M10-1.5 hex jam stainless steel	8
4	999-0355	175-2249	8
5	999-1120	Nut M10-1.5 nylon insert lock stainless steel	8
6a	175-0782	CHANNEL WLDT (Tennant Industrial)	1	(before SN 005000)
6b	275-9338	Channel weldment (iron gray) (Tennant Industrial)	1	(after SN 004999)
7a	275-9339	CASTER KIT, SQGE, REPLMT (Tennant Industrial)	2	(includes 7-16)
7b	175-0783	PIVOT WLDT, CASTER, SQGE (Tennant Industrial)	1
8	175-0784	Thrust bearing	1
9	175-0785	KNOB, STAR, 3.00D 4EAR 4.30L .59B (Tennant Industrial)	1
10	175-0786	KNOB, STAR, 3.00D 4EAR 0.50L M30X3.5[PLS (Tennant Industria	1
11	275-8350	WASHER, WAVY, 1.20B 1.54D .13 (Tennant Industrial)	1
12	175-2472	Retaining ring	1
13	175-0787	WASHER, FLAT, 0.60B 1.31D .10, SS (Tennant Industrial)	1
14	175-3481	WHEEL, 03.0D 1.38W 0.50B (Tennant Industrial)	1
15	999-1208	Nut 1/2-13 nylon insert lock stainless steel	1
16	999-0640	Bolt 1/2-13 x 3 18-8 hex head stainless steel	1
17a	175-0789	BRACKET WLDT, PIVOT (Tennant Industrial)	1	(before SN 005000)
17b	275-9340	Channel weldment (iron gray) (Tennant Industrial)	1	(after SN 004999)
18	175-0790	SPRING, DSL, 1.00OD 0.50ID 2.00L (Tennant Industrial)	1
19	175-0791	Nut M10 x 1.5 hex flange	1
20	999-0355	175-2249	1
21	175-0792	Bolt M10-1.5 x 60mm hex head stainless steel	1
22	999-0355	175-2249	4
23	999-1120	Nut M10-1.5 nylon insert lock stainless steel	2
24	999-0774	Bolt M10-1.5 x 30mm hex head stainless steel full thread	2
25	175-3454	Spacer stainless steel	8
26	175-0745	BUMPER, RBR, 1.5D 0.63 0.31H (Tennant Industrial)	1
27	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	1

Rear Wheel and Brake Assembly

Click to enlarge

#	Part	Description	Req	Notes
1a	275-2457	Tire (black) (Tennant Industrial)	2	(includes 2)
1b	275-2458	16 inch polyurethane tire (gray) (Tennant Industrial)	2	(includes 2) (optional)
1c	275-5095	TIRE ASSY, NON-SKID, 16X5X12.12 (Tennant Industrial)	2	(includes 2) (optional)
2	175-0636	BEARING, CUP, 2.56D 0.55W (Tennant Industrial)	2
3	175-0637	Clevis pin	4
4	175-6176	Cotter pin	5
5	175-0638	BEARING, CONE, 1.38B 0.71W (Tennant Industrial)	4
6	175-0639	WASHER, FLAT, 1.00, SAE (Tennant Industrial)	2
7	175-0640	NUT, HEX, SLTD, 1.00-20 (Tennant Industrial)	2
8	175-0641	CAP, HUB, DUST, 2.57D 0.77L (Tennant Industrial)	2
9a	175-0642	BRAKE ASSY, DRUM, MECH, 07.9D [6600]] (Tennant Industrial)	2	(includes 9b-9e)
9b	175-0643	SHOE SET, BRAKE [1PICK=1PKG] (Tennant Industrial)	2
9c	175-0644	VR, BRAKE KIT, REPAIR (Tennant Industrial)	1
9d	175-0645	SHAFT (Tennant Industrial)	1
9e	175-0646	SPRING (Tennant Industrial)	2
10	175-0647	SCREW, HEX, M12 X 1.75 X 40, 8.8 (Tennant Industrial)	12
11	999-0519	Nut M12-1.75 nylon insert lock stainless steel	12
12	999-0114	Washer 1/2 SAE flat	24
13	175-0648	SHAFT (Tennant Industrial)	1
14	175-0649	BUSHING, FLNG, 1.00B 1.13D 0.38L (Tennant Industrial)	2
15	275-7959	Right hand brake weldment (Tennant Industrial)	1
16	275-7960	Left hand brake weldment (Tennant Industrial)	1
17	175-2593	Roll pin	2
18	275-7961	Clevis pin (Tennant Industrial)	2
19	275-7962	Left hand clevis pin (Tennant Industrial)	2
20	175-0654	ROD, THRD (Tennant Industrial)	2
21	175-0655	Clevis pin	1

Recovery Tank Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	275-9287	Tank mounting bracket (iron gray) (Tennant Industrial)	1
2	999-0355	175-2249	14
3	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	6
4a	175-0693	COVER KIT, RECVY, W/ GASKET (Tennant Industrial)	1	(includes 5) (before SN 005000)
4b	275-9311	Recovery cover kit with gasket (teal) (Tennant Industrial)	1	(includes 5) (after SN 004999)
5	175-0694	GASKET, URE, .50, 12.65W 18.89L, ADH (Tennant Industrial)	1
6	275-9312	Harness bracket (iron gray) (Tennant Industrial)	1
7	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	6
8	175-3365	2 inch tube assembly	1	(before SN 001542)
9	175-0696	Press switch assembly 4 inch	1	(before SN 001542)
10	275-8343	PLUG, HOLE, RND, 0.75D .03-.08, BLK PYE (Tennant Industrial	1
11	175-0697	Plastic fitting	1	(before SN 001542)
12	175-0698	HOSE, VACUUM, 0.16ID X 006.0L (Tennant Industrial)	2	(before SN 001542)
13	175-0699	SPACER, LATCH, FLTR (Tennant Industrial)	1
14	175-0700	BRACKET WLDT, RETAINER, FLTR (Tennant Industrial)	1
15a	175-3363	Fan filter	1	(OEM)
15b	991-9110	Filter	1	(NON-OEM)
16	175-0701	BRACKET, RETAINING, FLTR (Tennant Industrial)	1
17	999-0355	175-2249	9
18	999-0784	Screw M8-1.25 x 16mm hex head stainless steel	1
19a	275-9313	TANK KIT, RECVY, W/ LABEL, REPLMT [7300] (Tennant Industria	1	(before SN 005000)
19b	275-9314	Recovery tank kit with label (teal) (Tennant Industrial)	1	(after SN 004999)
20	175-0703	BAR (Tennant Industrial)	2
21	175-0550	Sleeve	4
22	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	4
23	175-0677	CHANNEL, .19, 2.5W 1.0 29.3L, H&S (Tennant Industrial)	1
24	999-0355	175-2249	2
25	999-0246	Bolt M10-1.5 x 35mm hex head full thread	2
26	275-9315	Retaining bracket (iron gray) (Tennant Industrial)	1
27	175-0705	BRACKET WLDT, TANK (Tennant Industrial)	1
28	175-0706	BRACKET WLDT, TANK (Tennant Industrial)	1
29	175-9555	Switch guard solution strainer (Tennant Industrial)	1	(between SN 001542 and SN 002264)
30a	175-2262	Magnetic float sensor	1	(between SN 001542 and SN 002036) (OEM)
30b	991-3037	Magnetic float sensor	1	(NON-OEM)
30c	175-9554	Float switch	1	(after SN 002036)
31	275-8344	HARNESS, SENSOR, JUMPER (Tennant Industrial)	1	(after SN 001541 and before 002037)
32	175-0751	HOSE, VACUUM, 091.0L (Tennant Industrial)	1
33	275-4664	Float switch protector bracket	1	(after SN 002264)

Recovery Tank Drain Assembly

Click to enlarge

#	Part	Description	Req	Notes
0	175-0707	HOSE ASSY, DRAIN (Tennant Industrial)	1	(includes 1-17)
1	175-3391	Drain cap kit	1	(includes 2-5)
2	175-3394	Drain tank cap 2.25 thread pye	1
3	175-3393	Cap gasket	1
4	175-3395	3/4 ID retaining extension ring stainless steel	1
5	175-3392	Strap	1
6	175-3390	Drain tank cap 3.85 thread pye	1
7	175-3384	Tank cap	1	(includes 8)
8	275-4663	Gasket	1
9	175-3388	Drain cap gasket	1
10	175-3387	Seal	1
11	175-3386	Insert cover	1
12	175-3381	Plastic hose clamp 1.6 ID x .62	1
13	175-3382	Bolt M5-.8 x 25mm hex head stainless steel	1
14	999-0998	Washer #10 flat stainless steel	1
15	999-0740	Nut M5-.8 hex stainless steel	1
16	175-3389	Lid gasket	1
17	175-0708	HOSE ASSY, DRAIN (Tennant Industrial)	1
18	175-9552	Plastic fitting	1
19	175-2247	Plastic fitting	1

Revolving Light Assembly

Click to enlarge

#	Part	Description	Req	Notes
0a	275-2471	Light kit without overhead guard (Tennant Industrial)	1	(includes 1a, 2-17) (after SN 004999)
0b	275-8561	LIGHT KIT, REVL, W/O OHG, CI [7300/8300] (Tennant Industria	1	(includes 1b, 2-3, 9-14, 18a-18c, 19b, 20-22) (before SN 005000)
1a	275-2470	Bracket (iron gray) (Tennant Industrial)	1	(after SN 004999)
1b	275-8562	BRACKET, MTG (Tennant Industrial)	1	(before SN 005000)
2	999-1352	Screw 10-14 x 3/4 phillips pan head plastic thread rolling	5
3	999-0006	Washer 3/16 flat zinc plated	4
4a	375-4398	LED strobe light (Tennant Industrial)	1	(includes 4b-4c) (after SN 005724)
4b	275-4675	Lens	1	(after SN 005724)
4c	275-4678	Bulb	1	(after SN 005724)
5	275-7188	Light guard	1	(after SN 005724)
6	175-3382	Bolt M5-.8 x 25mm hex head stainless steel	2	(after SN 005724)
7	999-0998	Washer #10 flat stainless steel	2	(after SN 005724)
8	999-0740	Nut M5-.8 hex stainless steel	2	(after SN 005724)
9	175-4401	GROMMET, RBR, 0.38ID, F/0.5H, .12 MATL (Tennant Industrial)	2
10	175-5421	P clamp	1
11	175-2162	Nylon wire tie	1
12	275-8563	HARNESS, LIGHT, REVL, SHRD (Tennant Industrial)	1
13	175-0842	15amp circuit breaker	1
14	175-0569	Rocker switch	1
15	175-0837	Bolt M5-.8 x 16mm hex head	2	(after SN 005724)
16	999-0006	Washer 3/16 flat zinc plated	2	(after SN 005724)
17	175-2894	Nut M5-.8 hex nylon locking	2	(after SN 005724)
18a	275-4242	LIGHT, REVL, 36VDC, AMB, RWK 44684 (Tennant Industrial)	1	(includes 18b-18c)
18b	175-5418	Revolving light amber lens	1
18c	175-5417	Lamp	1
19a	275-2469	Light guard weldment (Tennant Industrial)	1	(between SN 005000 and SN 005724)
19b	175-5420	Revolving/flashing light guard weldment	1	(before SN 005000)
20	999-0581	Bolt M8-1.25 x 25mm hex head full thread zinc	4
21	999-0549	Washer 5/16 x 3/4 SAE flat stainless steel	4
22	999-0665	Nut M8-1.25 flange lock	4
N/S	275-7186	Lens (red) (Tennant Industrial)	1	(after SN 005724)
N/S	275-7187	Lens (blue) (Tennant Industrial)	1	(after SN 005724)
N/S	175-5422	Revolving light red lens	1	(before SN 005725)
N/S	175-5423	Revolving light blue lens	1	(before SN 005725)

Revolving Light Overhead Guard Assembly

Click to enlarge

#	Part	Description	Req	Notes
0a	275-2472	Light kit with overhead guard (Tennant Industrial)	1	(includes 1a-14) (after SN 004999)
0b	275-8564	LIGHT KIT, REVL, W/ OHG, CI [7300/8300] (Tennant Industrial	1	(includes 6-10, 15a-15c, 16b, 17-19) (before SN 005000)
1a	375-4398	LED strobe light (Tennant Industrial)	1	(includes 1b-1c) (after SN 005724)
1b	275-4675	Lens	1	(after SN 005724)
1c	275-4678	Bulb	1	(after SN 005724)
2	275-7188	Light guard	1	(after SN 005724)
3	175-3382	Bolt M5-.8 x 25mm hex head stainless steel	4	(after SN 005724)
4	999-0998	Washer #10 flat stainless steel	4	(after SN 005724)
5	999-0740	Nut M5-.8 hex stainless steel	4	(after SN 005724)
6	175-4401	GROMMET, RBR, 0.38ID, F/0.5H, .12 MATL (Tennant Industrial)	1
7	275-8565	HARNESS, LIGHT, REVL, OHG (Tennant Industrial)	1
8	175-3261	PVC duct	1
9	175-0569	Rocker switch	1
10	175-0842	15amp circuit breaker	1
11	175-0837	Bolt M5-.8 x 16mm hex head	2	(after SN 005724)
12	999-0006	Washer 3/16 flat zinc plated	2	(after SN 005724)
13	175-2894	Nut M5-.8 hex nylon locking	2	(after SN 005724)
14	175-2226	Nylon wire tie	4	(after SN 006070)
15a	275-4242	LIGHT, REVL, 36VDC, AMB, RWK 44684 (Tennant Industrial)	1	(includes 15b-15c)
15b	175-5418	Revolving light amber lens	1
15c	175-5417	Lamp	1
16a	275-2469	Light guard weldment (Tennant Industrial)	1	(between SN 005000 and SN 005724)
16b	175-5420	Revolving/flashing light guard weldment	1	(before SN 004999)
17	999-0581	Bolt M8-1.25 x 25mm hex head full thread zinc	4
18	999-0549	Washer 5/16 x 3/4 SAE flat stainless steel	4
19	999-0665	Nut M8-1.25 flange lock	4
20	175-3261	PVC duct	1
N/S	275-7186	Lens (red) (Tennant Industrial)	1	(after SN 005724)
N/S	275-7187	Lens (blue) (Tennant Industrial)	1	(after SN 005724)
N/S	175-5422	Revolving light red lens	1	(before SN 005725)
N/S	175-5423	Revolving light blue lens	1	(before SN 005725)

Right Side Brush Bumper and Electrical Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	175-2373	36V contactor	1
2	999-0016	Washer 1/4 flat plain finish	2
3	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	2
4	999-0089	Washer #10 internal star lock zinc plated	2
5	999-0006	Washer 3/16 flat zinc plated	2
6	999-0460	Nut 10-32 hex	2
7	999-0406	Washer 5/16 internal star lock zinc plated	2
8	999-0549	Washer 5/16 x 3/4 SAE flat stainless steel	2
9	175-0849	Nut 5/16-24 hex	2
10	175-0842	15amp circuit breaker	2
11a	275-8538	PLATE, MTG, CONTACTOR (Tennant Industrial)	1	(before SN 005000)
11b	275-2532	Contactor mounting plate (gray) (Tennant Industrial)	1	(after SN 004999)
12	175-3436	Bolt 8mm-1.25 x 40mm hex head	1
13	999-0759	Screw 6-32 x 3/8 flat head phillips zinc plated	2
14	275-2533	Washer #6 internal lock stainless steel (Tennant Industrial)	4
15	175-3224	Nut 6-32 hex lock	2
16	275-8548	STAND-OFF, 1.25, PLSTC (Tennant Industrial)	5
17	275-8546	CIRCUITBOARD, SWPR [8300] (Tennant Industrial)	1	(includes 18)
18	275-8547	FUSE, 010A, GLASS TUBE, 32VDC, 0.25D (Tennant Industrial)	1
19a	675-7186	BUMPER WLDT (Tennant Industrial)	1	(before SN 005000)
19b	675-5687	BUMPER WLDT, IRON GRAY (Tennant Industrial)	1	(after SN 004999)
20a	675-4142	BRACKET, HSNG, BRUSH (Tennant Industrial)	1	(before SN 005000)
20b	675-1196	BRACKET, HSNG, BRUSH, IRON GRAY (Tennant Industrial)	1	(after SN 004999)
21	999-1372	Bolt M10-1.5 x 25mm hex head stainless steel	5
22	999-0355	175-2249	5
23	999-1120	Nut M10-1.5 nylon insert lock stainless steel	2
24a	675-2648	HOUSING WLDT, BRUSH (Tennant Industrial)	1	(before SN 005000)
24b	675-2224	HOUSING WLDT, BRUSH, IRON GRAY (Tennant Industrial)	1	(after SN 004999)
25	275-0443	Screw M8-1.25 x 25 button head stainless steel	4
26	999-0355	175-2249	4
27	999-0665	Nut M8-1.25 flange lock	2
28	275-8376	LABEL, INFO, BRUSH, SIDE, ADJ (Tennant Industrial)	1
29	175-3233	Cable tie mount	1
30	175-2162	Nylon wire tie	2
31	275-8549	STAND-OFF, 1.25, METAL (Tennant Industrial)	2

Right Side Brush Wire Harness Assembly

Click to enlarge

#	Part	Description	Req	Notes	Availability
1	675-2541	HARNESS, BRUSH, SIDE, RH (Tennant Industrial)	1

Right Side Squeegee Assembly - Cylindrical - Max Pro 1200

Click to enlarge

#	Part	Description	Req	Notes
1a	275-8645	GUARD WLDT, RH [MP1200] (Tennant Industrial)	1	(before SN 005000)
1b	275-2583	Right hand guard weldment (gray) (Tennant Industrial)	1	(after SN 004999)
2	275-2936	SCREW, HEX, M12 X 1.75 X 50, SS (Tennant Industrial)	2
3	999-0519	Nut M12-1.75 nylon insert lock stainless steel	2
5a	275-8653	ARM WLDT, FRONT, RH (Tennant Industrial)	1	(before SN 005000)
5b	275-2572	Right hand front arm weldment (gray) (Tennant Industrial)	1	(after SN 004999)
6	175-3460	Flanged bushing	1
7	175-3349	Sleeved bushing	3
8	175-3347	Washer .61 thrust	7
9	999-0355	175-2249	4
10	999-1415	Screw M8-1.25 x 12mm hex head stainless steel	4
11a	275-8655	ARM WLDT, REAR, RH (Tennant Industrial)	1	(before SN 005000)
11b	275-2573	Right hand rear arm weldment (gray) (Tennant Industrial)	1	(after SN 004999)
12	175-0773	FRAME WLDT, SQGE, SIDE, RH (Tennant Industrial)	1
13	175-2969	BLADE ASSY, SQGE, 28.6L (Tennant Industrial)	1
14	175-0774	GUIDE, POINT, SQGE, SIDE (Tennant Industrial)	1
15	175-3357	Squeegee blade retainer	1
16	175-0775	Clevis pin (Tennant Industrial)	1
17	175-7107	Cotter hair pin	1
18	175-0770	Extension spring	2
19	175-0772	BOLT, EYE, M8 X 1.25 X 070MM, 05.50 EYE (Tennant Industrial	2
20	999-1424	Nut M8-1.25 hex stainless steel	4
21	275-0146	PIN, CLEVIS, 0.37D X 0.75L (Tennant Industrial)	2
22	275-2574	Iron arm latch (gray) (Tennant Industrial)	2
23	175-8867	SCREW, HEX, M6 X 1.00 X 12, SS (Tennant Industrial)	2
24	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	2
25	175-0768	PIN, ROLL, .250D X 0.75L, .250/.256 (Tennant Industrial)	2
26	275-3247	BUMPER, RBR, 2.0D 0.75TH .38-16 (Tennant Industrial)	1
27	275-3268	Nut 3/8 - 16 hex, ss	1
28	275-8657	LATCH (Tennant Industrial)	1
29	999-0334	Bolt 1/4-20 x 3/4 inch hex head stainless steel	4

Right Side Squeegee Assembly - Cylindrical - Max Pro 1000

Click to enlarge

#	Part	Description	Req	Notes
1a	275-8652	GUARD WLDT, RH (Tennant Industrial)	1	(before SN 005000)
1b	275-2571	Right hand guard weldment (gray) (Tennant Industrial)	1	(after SN 004999)
2	275-2936	SCREW, HEX, M12 X 1.75 X 50, SS (Tennant Industrial)	2
3	999-0519	Nut M12-1.75 nylon insert lock stainless steel	2
5a	275-8653	ARM WLDT, FRONT, RH (Tennant Industrial)	1	(before SN 005000)
5b	275-2572	Right hand front arm weldment (gray) (Tennant Industrial)	1	(after SN 004999)
6	175-3460	Flanged bushing	1
7	175-3349	Sleeved bushing	3
8	175-3347	Washer .61 thrust	7
9	999-0355	175-2249	4
10	999-1415	Screw M8-1.25 x 12mm hex head stainless steel	4
11a	275-8655	ARM WLDT, REAR, RH (Tennant Industrial)	1	(before SN 005000)
11b	275-2573	Right hand rear arm weldment (gray) (Tennant Industrial)	1	(after SN 0049990
12	175-0773	FRAME WLDT, SQGE, SIDE, RH (Tennant Industrial)	1
13	175-2969	BLADE ASSY, SQGE, 28.6L (Tennant Industrial)	1
14	175-0774	GUIDE, POINT, SQGE, SIDE (Tennant Industrial)	1
15	175-3357	Squeegee blade retainer	1
16	175-0775	Clevis pin (Tennant Industrial)	1
17	175-7107	Cotter hair pin	1
18	175-0770	Extension spring	2
19	175-0772	BOLT, EYE, M8 X 1.25 X 070MM, 05.50 EYE (Tennant Industrial	2
20	999-1424	Nut M8-1.25 hex stainless steel	4
21	275-0146	PIN, CLEVIS, 0.37D X 0.75L (Tennant Industrial)	2
22	275-2574	Iron arm latch (gray) (Tennant Industrial)	2
23	175-8867	SCREW, HEX, M6 X 1.00 X 12, SS (Tennant Industrial)	2
24	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	2
25	175-0768	PIN, ROLL, .250D X 0.75L, .250/.256 (Tennant Industrial)	2
26	275-3247	BUMPER, RBR, 2.0D 0.75TH .38-16 (Tennant Industrial)	1
27	275-3268	Nut 3/8 - 16 hex, ss	1
28	275-8657	LATCH (Tennant Industrial)	1
29	999-0334	Bolt 1/4-20 x 3/4 inch hex head stainless steel	4

Right Side Squeegee Assembly - Disc - Max Pro 1000

Click to enlarge

#	Part	Description	Req
1	175-0771	Squeegee side arm frame weldment (gray) (Tennant Industrial	2
2	175-0768	PIN, ROLL, .250D X 0.75L, .250/.256 (Tennant Industrial)	2
3	175-3349	Sleeved bushing	3
4	175-0769	SLEEVE, P/M, 0.34B 0.63D 0.5L [316SS] (Tennant Industrial)	4
5	175-3347	Washer .61 thrust	7
6	999-0355	175-2249	7
7	999-0786	Screw M8-1.25 x 35mm hex head stainless steel	2
8	999-0496	Nut M8-1.25 nylon insert lock stainless steel	2
9	175-3460	Flanged bushing	2
10	999-0355	175-2249	1
11	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	2
12	175-0770	Extension spring	3
13	202-3501	Ring pin	1
14	175-0772	BOLT, EYE, M8 X 1.25 X 070MM, 05.50 EYE (Tennant Industrial	3
15	999-1424	Nut M8-1.25 hex stainless steel	6
16	175-0773	FRAME WLDT, SQGE, SIDE, RH (Tennant Industrial)	1
17	175-2969	BLADE ASSY, SQGE, 28.6L (Tennant Industrial)	1
18	175-3357	Squeegee blade retainer	1
19	175-0774	GUIDE, POINT, SQGE, SIDE (Tennant Industrial)	1
20	175-0775	Clevis pin (Tennant Industrial)	1
21	175-2113	Cotter pin	1
22	175-0776	BRACKET, LATCH, DBL SCB, SQGE, SIDE (Tennant Industrial)	2
23	999-1312	Screw M6-1 x 20mm hex head stainless steel	2
24	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	4
25	175-0777	P/M sleeve	2
26	999-0497	Nut M6-1 nylon insert lock stainless steel	2
27	275-8349	BRACKET WLDT, MTG, SPRING (Tennant Industrial)	1
28	999-0488	Nut 3/8-16 flange lock serrated zinc plated	2
29	175-2111	Clevis pin	1

Right Side Squeegee Assembly - Disc - Max Pro 1200

Click to enlarge

#	Part	Description	Req
1	175-0771	Squeegee side arm frame weldment (gray) (Tennant Industrial	2
2	175-0768	PIN, ROLL, .250D X 0.75L, .250/.256 (Tennant Industrial)	2
3	175-3349	Sleeved bushing	3
4	175-0769	SLEEVE, P/M, 0.34B 0.63D 0.5L [316SS] (Tennant Industrial)	4
5	175-3347	Washer .61 thrust	7
6	999-0355	175-2249	7
7	999-0786	Screw M8-1.25 x 35mm hex head stainless steel	2
8	999-0496	Nut M8-1.25 nylon insert lock stainless steel	2
9	175-3460	Flanged bushing	1
10	999-0355	175-2249	2
11	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	2
12	175-0770	Extension spring	3
13	202-3501	Ring pin	1
14	175-0772	BOLT, EYE, M8 X 1.25 X 070MM, 05.50 EYE (Tennant Industrial	3
15	999-1424	Nut M8-1.25 hex stainless steel	6
16	175-0773	FRAME WLDT, SQGE, SIDE, RH (Tennant Industrial)	1
17	175-2969	BLADE ASSY, SQGE, 28.6L (Tennant Industrial)	1
18	175-3357	Squeegee blade retainer	1
19	275-8494	PANEL, ACCESS (Tennant Industrial)	1
20	175-0775	Clevis pin (Tennant Industrial)	1
21	175-2113	Cotter pin	1
22	175-0776	BRACKET, LATCH, DBL SCB, SQGE, SIDE (Tennant Industrial)	2
23	999-1312	Screw M6-1 x 20mm hex head stainless steel	2
24	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	4
25	175-0777	P/M sleeve	2
26	999-0497	Nut M6-1 nylon insert lock stainless steel	2
27	275-8349	BRACKET WLDT, MTG, SPRING (Tennant Industrial)	1
28	999-0488	Nut 3/8-16 flange lock serrated zinc plated	2
29	175-2111	Clevis pin	1

Right Side Vacuumized Squeegee - Disc - Max Pro 1200

Click to enlarge

#	Part	Description	Req	Notes
1	275-8608	FRAME ASSY, SQGE, SIDE, VACUUM, RH (Tennant Industrial)	1
2	275-8609	RETAINER, BLADE, SQGE, FRONT (Tennant Industrial)	1
3	999-0496	Nut M8-1.25 nylon insert lock stainless steel	3
4	175-3357	Squeegee blade retainer	1
5	275-8610	BLADE ASSY, SQGE, SIDE (Tennant Industrial)	1
6	275-8611	BLADE, SQGE, .12 3.00W 014.1L, linatex (Tennant Industrial)	1
7	175-0774	GUIDE, POINT, SQGE, SIDE (Tennant Industrial)	1
8	175-0775	Clevis pin (Tennant Industrial)	1
9	175-2113	Cotter pin	1
10	275-8612	TUBE WLDT, TEE, 2.0D 5.8L 1.0D (Tennant Industrial)	1
11a	275-8618	HOSE, VACUUM, 058.5L (Tennant Industrial)	1	(before SN 001703)
11b	275-8613	HOSE ASSY, W/2CUFF, 2.0D 075L 2.0/2.0 (Tennant Industrial)	1	(after SN 001702)
12a	275-8617	HOSE, VACUUM, 2.00ID X 035.0L (Tennant Industrial)	1	(before SN 001703)
12b	275-8614	HOSE ASSY, W/2CUFF, 2.0D 026L 2.0/2.0 (Tennant Industrial)	1	(after SN 001702)
13a	275-8619	HOSE ASSY, W/2CUFF, 1.0D 041L 1.0/1.0 (Tennant Industrial)	1	(before SN 001703)
13b	275-8615	Hose assembly w 2 cuff	1	(after SN 001702)
14	175-2254	Hose clamp	1
15	275-8616	BRACKET, TUBE, TEE (Tennant Industrial)	1	(after SN 001702)
16	175-3166	Bolt M6-1 x 16mm hex head	1	(after SN 001702)
17	999-0016	Washer 1/4 flat plain finish	1

Scrub Head Drive Assembly - Cylindrical - Max Pro 1000

Click to enlarge

#	Part	Description	Req	Notes
1a	275-2566	Electric Motor - 1.5 HP 36 Volt (Tennant Industrial)	2	(includes 1b)
1b	175-1113	Carbon brush (sold individually)	2
2	175-5395	Jumper reverse wire assembly	1
3	999-1170	Bolt M10-1.5 x 20mm hex head stainless steel	8
4	999-0355	175-2249	14
5	275-8628	Timing sprocket 23 tooth	2
6	175-3200	Square keyway	2
7	275-0724	Screw M1/4 - 20 x 5/16 socket set	4
8	275-8629	Belt, synchronous (Tennant Industrial)	2
9	275-8630	SPROCKET, TIMING, 4.261PD, 68GRV, PL (Tennant Industrial)	2
10	275-0085	Square key .19 x .19 1.25l	2
11	275-8631	SHAFT, DRIVE, BRUSH (Tennant Industrial)	2
12	175-9072	Ball bearing	6
13	275-8632	RING, RETAINING, INT, 1.85D, BASIC (Tennant Industrial)	4
14	275-7993	Drive brush hub weldment (gray) (Tennant Industrial)	2
15	275-7994	Drive brush plug (gray) (Tennant Industrial)	2
16	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	10
17	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	8
18	175-8818	Square keyway	2
19	275-1464	WASHER, FLAT, 0.25B 1.12D .12, SS (Tennant Industrial)	2
20	275-8633	HOOK WLDT, LATCH (Tennant Industrial)	2
21	275-2567	Motor spring (gray) (Tennant Industrial)	2
22	275-8635	PIN, CLEVIS, 0.62D X 5.25L (Tennant Industrial)	2
23	175-2106	Cotter hair pin	2
24	275-8636	COVER, DRIVE (Tennant Industrial)	2
25	999-0807	Screw M6-1 x 10mm flat head phillips	10
26	999-0774	Bolt M10-1.5 x 30mm hex head stainless steel full thread	2
27	175-2977	COVER, IDLER (Tennant Industrial)	2
28	275-8637	CAM, FRONT (Tennant Industrial)	2
29	275-8638	CAM, REAR (Tennant Industrial)	2
30	999-0774	Bolt M10-1.5 x 30mm hex head stainless steel full thread	2
31	275-6556	Brush drive plug (Tennant Industrial)	2
32	275-6557	Bearing retainer (Tennant Industrial)	2
33	999-1220	Screw M5-.8 x 12mm hex head stainless steel	8
34	175-2894	Nut M5-.8 hex nylon locking	8
35	275-2003	Retaining ring (Tennant Industrial)	2
36	275-8639	LATCH (Tennant Industrial)	2
37	175-2079	Screw M4-.07 x 35mm pan head stainless steel	6
38	999-0954	Nut M4-.7 nylon insert lock stainless steel	6
39	999-1120	Nut M10-1.5 nylon insert lock stainless steel	2
40	275-8640	GASKET, COVER, .09 (Tennant Industrial)	2

Scrub Head Drive Assembly - Cylindrical - Max Pro 1200

Click to enlarge

#	Part	Description	Req	Notes
1a	275-2566	Electric Motor - 1.5 HP 36 Volt (Tennant Industrial)	2	(includes 1b)
1b	175-1113	Carbon brush (sold individually)	2
2	175-5395	Jumper reverse wire assembly	1
3	999-1170	Bolt M10-1.5 x 20mm hex head stainless steel	8
4	999-0355	175-2249	14
5	275-8628	Timing sprocket 23 tooth	2
6	175-3200	Square keyway	2
7	275-0724	Screw M1/4 - 20 x 5/16 socket set	4
8	275-8629	Belt, synchronous (Tennant Industrial)	2
9	275-8630	SPROCKET, TIMING, 4.261PD, 68GRV, PL (Tennant Industrial)	2
10	275-0085	Square key .19 x .19 1.25l	2
11	275-8631	SHAFT, DRIVE, BRUSH (Tennant Industrial)	2
12	175-9072	Ball bearing	6
13	275-8632	RING, RETAINING, INT, 1.85D, BASIC (Tennant Industrial)	4
14	275-7993	Drive brush hub weldment (gray) (Tennant Industrial)	2
15	275-7994	Drive brush plug (gray) (Tennant Industrial)	2
16	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	10
17	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	8
18	175-8818	Square keyway	2
19	275-1464	WASHER, FLAT, 0.25B 1.12D .12, SS (Tennant Industrial)	2
20	275-8633	HOOK WLDT, LATCH (Tennant Industrial)	2
21	275-2567	Motor spring (gray) (Tennant Industrial)	2
22	275-8635	PIN, CLEVIS, 0.62D X 5.25L (Tennant Industrial)	2
23	175-2106	Cotter hair pin	2
24	275-8636	COVER, DRIVE (Tennant Industrial)	2
25	999-0807	Screw M6-1 x 10mm flat head phillips	10
26	999-0774	Bolt M10-1.5 x 30mm hex head stainless steel full thread	2
27	175-2977	COVER, IDLER (Tennant Industrial)	2
28	275-8637	CAM, FRONT (Tennant Industrial)	2
29	275-8638	CAM, REAR (Tennant Industrial)	2
30	999-0774	Bolt M10-1.5 x 30mm hex head stainless steel full thread	2
31	275-6556	Brush drive plug (Tennant Industrial)	2
32	275-6557	Bearing retainer (Tennant Industrial)	2
33	999-1220	Screw M5-.8 x 12mm hex head stainless steel	8
34	175-2894	Nut M5-.8 hex nylon locking	8
35	275-2003	Retaining ring (Tennant Industrial)	2
36	275-8639	LATCH (Tennant Industrial)	2
37	175-2079	Screw M4-.07 x 35mm pan head stainless steel	6
38	999-0954	Nut M4-.7 nylon insert lock stainless steel	6
39	999-1120	Nut M10-1.5 nylon insert lock stainless steel	2
40	275-8640	GASKET, COVER, .09 (Tennant Industrial)	2

Scrub Head Frame and Linkage Assembly - Cylindrical - Max Pro 1000

Click to enlarge

#	Part	Description	Req	Notes
1	275-8620	ROD-END, 0.62-18RH FEM 0.50-18STUD (Tennant Industrial)	2
2	275-8621	ROD-END, 0.63-18LH (Tennant Industrial)	2
3	275-8622	ROD, LINK (Tennant Industrial)	2
4	999-0003	Nut 5/8-18 hex jam stainless steel	2
5	999-1284	Nut 5/8-18 hex jam left hand stainless steel	2
6	275-8623	TUBE, 0.69ID 1.25OD 00.4L, BLK, ROD-END (Tennant Industrial	2
7	999-0403	Nut 5/8-18 nylon insert lock grade 8 yellow zinc	4
8	275-2563	Rod-end link assembly (Tennant Industrial)	2	(before SN 003696)
9	275-2563	Rod-end link assembly (Tennant Industrial)	2	(before SN 003696)
10	175-2040	Cotter pin	4	(before SN 003696)
11	275-8624	SPACER, PLATE (Tennant Industrial)	2	(before SN 003696)
12	275-8625	BUMPER, RBR, 1.0W 2.8L 1.0TH 2/0.3H (Tennant Industrial)	2
13	275-3021	SCREW, PAN, PHL, M5 X 0.80 X 25, SS (Tennant Industrial)	4
14	999-0740	Nut M5-.8 hex stainless steel	4
15	275-2564	Brush housing weldment (gray) (Tennant Industrial)	1
16a	275-8346	GUARD, KICK IN, SCB HEAD (Tennant Industrial)	1	(before SN 005000)
16b	275-9318	Scrub head kick in guard (iron gray) (Tennant Industrial)	1	(after SN 004999)
17	175-0744	Clevis pin .37D x 1 5/16	1
18	999-0355	175-2249	5
19	175-6176	Cotter pin	2
20	175-0742	TUBE, 0.52ID 1.75OD 01.6L, STL (Tennant Industrial)	1
21	175-0716	Clevis pin	1
22	999-0187	Washer 1/2 flat plain finish	1
23	175-3281	Cotter pin	1
24	175-0743	PIN, CLEVIS, 0.38D X 2.50L (Tennant Industrial)	1
25	275-2565	Stop plate weldment (gray) (Tennant Industrial)	1
26	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	3
27	175-0733	BUMPER, PYE, 1.50D 0.56TH 0.33H (Tennant Industrial)	1
28	999-0496	Nut M8-1.25 nylon insert lock stainless steel	1
29	275-8601	FITTING, GREASE, E90 PM04 .75L (Tennant Industrial)	4	(before SN 003696)
30	175-0736	LABEL SET, INFO/HZRD [MAXPRO] (Tennant Industrial)	1
31	175-2367	Steel plated washer	4
32	275-2563	Rod-end link assembly (Tennant Industrial)	2	(after SN 003695)
33	275-9320	Rod-end tube (gray) (Tennant Industrial)	6	(after SN 003695)
34	999-0403	Nut 5/8-18 nylon insert lock grade 8 yellow zinc	4	(after SN 003695)

Scrub Head Frame and Linkage Assembly - Cylindrical - Max Pro 1200

Click to enlarge

#	Part	Description	Req	Notes
1	275-8620	ROD-END, 0.62-18RH FEM 0.50-18STUD (Tennant Industrial)	2
2	275-8621	ROD-END, 0.63-18LH (Tennant Industrial)	2
3	275-8622	ROD, LINK (Tennant Industrial)	2
4	999-0003	Nut 5/8-18 hex jam stainless steel	2
5	999-1284	Nut 5/8-18 hex jam left hand stainless steel	2
6	275-8623	TUBE, 0.69ID 1.25OD 00.4L, BLK, ROD-END (Tennant Industrial	2
7	999-0403	Nut 5/8-18 nylon insert lock grade 8 yellow zinc	4
8a	275-2563	Rod-end link assembly (Tennant Industrial)	2	(before SN 003696) (replaced by 8b)
8b	675-2140	LINK KIT, ROD-END, 8.65, CI (Tennant Industrial)	2
9	275-2563	Rod-end link assembly (Tennant Industrial)	2	(before SN 003696)
10	175-2040	Cotter pin	4	(before SN 003696)
11	275-8624	SPACER, PLATE (Tennant Industrial)	2	(before SN 003696)
12	275-8625	BUMPER, RBR, 1.0W 2.8L 1.0TH 2/0.3H (Tennant Industrial)	2
13	275-3021	SCREW, PAN, PHL, M5 X 0.80 X 25, SS (Tennant Industrial)	4
14	999-0740	Nut M5-.8 hex stainless steel	4
15	275-2581	Brush housing weldment (gray) (Tennant Industrial)	1
16a	275-8346	GUARD, KICK IN, SCB HEAD (Tennant Industrial)	1	(before SN 005000)
16b	275-9318	Scrub head kick in guard (iron gray) (Tennant Industrial)	1	(after SN 004999)
17	175-0744	Clevis pin .37D x 1 5/16	1
18	999-0355	175-2249	7
19	175-6176	Cotter pin	2
20	175-0742	TUBE, 0.52ID 1.75OD 01.6L, STL (Tennant Industrial)	1
21	175-0716	Clevis pin	1
22	999-0187	Washer 1/2 flat plain finish	1
23	175-3281	Cotter pin	1
24	175-0743	PIN, CLEVIS, 0.38D X 2.50L (Tennant Industrial)	1
25	275-2565	Stop plate weldment (gray) (Tennant Industrial)	2
26	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	3
27	175-0733	BUMPER, PYE, 1.50D 0.56TH 0.33H (Tennant Industrial)	1
28	999-0496	Nut M8-1.25 nylon insert lock stainless steel	1
29a	275-8597	BRACKET, ADAPTER, MTG, KICK IN, FRAME (Tennant Industrial)	1	(before SN 005000)
29b	275-2559	Frame bracket adapter (Tennant Industrial)	1	(after SN 004999)
30	999-1372	Bolt M10-1.5 x 25mm hex head stainless steel	1
31	999-1120	Nut M10-1.5 nylon insert lock stainless steel	1
32a	275-8595	BUMPER, SIDE, SCB HEAD, WIDE (Tennant Industrial)	1	(before SN 005000)
32b	275-2558	Scrub head side bumper (gray) (Tennant Industrial)	1	(after SN 004999)
33	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	4
34	999-0355	175-2249	8
35a	275-8600	GUARD WLDT, SQGE, REAR [MP1200] (Tennant Industrial)	1	(before SN 005000)
35b	275-2561	Rear squeegee guard weldment (gray) (Tennant Industrial)	1	(after SN 004999)
36	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	4
37	275-8596	TREAD, NON-SKID, 05.8W 12.5L, BMPR, SIDE (Tennant Industria	1
38	275-8601	FITTING, GREASE, E90 PM04 .75L (Tennant Industrial)	4	(before SN 003696)
39	175-0736	LABEL SET, INFO/HZRD [MAXPRO] (Tennant Industrial)	1
40	175-2367	Steel plated washer	4
41a	675-0181	GUARD KIT, SQGE, REAR, CI [7300/8300] (Tennant Industrial)	1	(includes 41c, 42-44) (before SN 005000)
41b	575-5987	GUARD KIT, SQGE, REAR, IRON GRAY, CI (Tennant Industrial)	1	(includes 41d, 42-44) (after SN 004999))
41c	275-8602	GUARD, BMPR (Tennant Industrial)	1	(before SN 005000)
41d	275-2562	Bumper guard (gray) (Tennant Industrial)	1	(after SN 004999)
43	999-0496	Nut M8-1.25 nylon insert lock stainless steel	2
44	999-0024	Washer 5/16 flat stainless steel	4
45	275-2563	Rod-end link assembly (Tennant Industrial)	2
46	275-8623	TUBE, 0.69ID 1.25OD 00.4L, BLK, ROD-END (Tennant Industrial	6
47	999-0403	Nut 5/8-18 nylon insert lock grade 8 yellow zinc	4

Scrub Head Frame Assembly - Disc - Max Pro 1000

Click to enlarge

#	Part	Description	Req	Notes
1a	275-7971	Brush frame weldment (gray) (OBSOLETE)	1	(before SN 006110)
1b	275-2459	Frame weldment (gray) (Tennant Industrial)	1	(after SN 006109)
2a	275-2460	1Hp 36V motor (Tennant Industrial)	2	(standard) (before SN 006028)
2b	275-2461	1.5Hp 36V motor (Tennant Industrial)	2	(heavy duty) (before SN 006051)
3	175-0729	SCREW, HEX, .38-16 X 1.00, NL (Tennant Industrial)	8	(before SN 006028)
4	999-0355	175-2249	8	(before SN 006028)
5	175-2202	Nylon wire tie	2	(before SN 006028)
6	175-9525	Brush drive hub	2
7	999-1407	Washer 5/16 belleville	2
8	999-0355	175-2249	3
9	999-0424	Bolt 5/16-18 x 1 hex head stainless steel	2
10	N/A	Not available	1	(stop frame bracket)
11	999-1372	Bolt M10-1.5 x 25mm hex head stainless steel	3
12	999-1120	Nut M10-1.5 nylon insert lock stainless steel	3
13	175-0733	BUMPER, PYE, 1.50D 0.56TH 0.33H (Tennant Industrial)	1
14	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	1
15	999-0496	Nut M8-1.25 nylon insert lock stainless steel	1
16	175-0734	SKIRT, RBR, .12, 04.50W 47.19L, 10/ HOLE (Tennant Industria	1
17	175-0735	SKIRT, RBR, .12, 04.50W 15.66L, 03/ HOLE (Tennant Industria	1	(before SN 006110)
18	175-3378	Rivet 1/4 x 57/64 plastic	24
19	175-0736	LABEL SET, INFO/HZRD [MAXPRO] (Tennant Industrial)	1
20	175-0737	SKIRT, RBR, .12, 04.50W 17.25L, 05/ HOLE (Tennant Industria	2
21a	275-2460	1Hp 36V motor (Tennant Industrial)	2	(after SN 006027)
21b	275-2461	1.5Hp 36V motor (Tennant Industrial)	2	(after SN 006050)
22	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	8	(after SN 006027)
23	175-7920	Washer M8 flat stainless steel	8	(after SN 006027)
24	275-2462	Rear skirt kit (Tennant Industrial)	1	(before SN 006110)
25	275-2463	Rubber skirt (Tennant Industrial)	1	(after SN 006109)
26	175-3378	Rivet 1/4 x 57/64 plastic	6	(after SN 006109)
27	999-0355	175-2249	3

Scrub Head Frame Assembly - Disc - Max Pro 1200

Click to enlarge

#	Part	Description	Req	Notes
1	275-2557	Scrub head frame weldment (gray) (Tennant Industrial)	1
2	275-2460	1Hp 36V motor (Tennant Industrial)	3
3	175-0729	SCREW, HEX, .38-16 X 1.00, NL (Tennant Industrial)	12
4	999-0355	175-2249	12
5	175-2202	Nylon wire tie	3
6	175-9525	Brush drive hub	3
7	999-1407	Washer 5/16 belleville	3
8	999-0355	175-2249	4
9	999-0424	Bolt 5/16-18 x 1 hex head stainless steel	3
10	275-7972	Iron frame bracket (gray) (Tennant Industrial)	1
11	999-1372	Bolt M10-1.5 x 25mm hex head stainless steel	3
12	999-1120	Nut M10-1.5 nylon insert lock stainless steel	3
13	175-0733	BUMPER, PYE, 1.50D 0.56TH 0.33H (Tennant Industrial)	1
14	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	1
15	999-0496	Nut M8-1.25 nylon insert lock stainless steel	1
16	275-8593	SKIRT, RBR, .12, 04.50W 55.06L, 13/ HOLE (Tennant Industria	1
17	275-8594	SKIRT, RBR, .12, 04.50W 35.66L, 08/ HOLE (Tennant Industria	1
18	175-3378	Rivet 1/4 x 57/64 plastic	21
19	175-0736	LABEL SET, INFO/HZRD [MAXPRO] (Tennant Industrial)	1
20	275-2460	1Hp 36V motor (Tennant Industrial)	3	(after SN 006027)
21	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	12	(after SN 006027)
22	175-7920	Washer M8 flat stainless steel	12	(after SN 006027)
23	999-0355	175-2249	3

Scrub Head Lift Assembly

Click to enlarge

#	Part	Description	Req
1	175-0714	ACTUATOR, 36VDC, 07.0STRK, 700LB (Tennant Industrial)	1
2	174-0347	Clevis pin 1/2 x 1.75	1
3	175-0716	Clevis pin	1
4	999-0187	Washer 1/2 flat plain finish	1
5	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	1
6	175-0717	BELLCRANK, LIFT, HEAD (Tennant Industrial)	1
7	175-3335	Flanged bushing	4
8	175-0718	BUMPER, RBR, 1.2D 0.72L (Tennant Industrial)	1
9	999-0998	Washer #10 flat stainless steel	2
10	175-3382	Bolt M5-.8 x 25mm hex head stainless steel	1
11	999-0740	Nut M5-.8 hex stainless steel	1
12	175-8378	Arm weldment (Tennant Industrial)	1
13	175-2099	Flanged bushing	2
14	175-0720	Clevis pin 1/2D x 5 1/2	1
15	999-0114	Washer 1/2 SAE flat	1
16	175-3281	Cotter pin	3
17	175-0721	SPRING, CMPR, 1.50OD, 02.5L (Tennant Industrial)	2
18	175-0722	SLEEVE, P/M, 0.38B 0.75D 1.7L, BNZ (Tennant Industrial)	2
19	175-0723	SCREW, HEX, M8 X 1.25 X 160, 8.8 (Tennant Industrial)	1
20	999-0114	Washer 1/2 SAE flat	1
21	999-0355	175-2249	1
22	999-0496	Nut M8-1.25 nylon insert lock stainless steel	1
23	175-3170	P clamp	1
24	175-0536	Bolt M6-1 x 20mm hex head thread forming	1
25	175-2367	Steel plated washer	1

Scrub Head Linkage Assembly - Disc - Max Pro 1000

Click to enlarge

#	Part	Description	Req	Notes
1	275-9319	LINK ASSY, ROD-END, .63-18 (Tennant Industrial)	4	(before SN 003696)
2	275-2563	Rod-end link assembly (Tennant Industrial)	4	(before SN 003696)
3	N/A	Not available	2	(link) (before SN 003696)
4	175-2040	Cotter pin	8	(before SN 003696)
5a	275-8346	GUARD, KICK IN, SCB HEAD (Tennant Industrial)	1	(before SN 005000)
5b	275-9318	Scrub head kick in guard (iron gray) (Tennant Industrial)	1	(after SN 004999)
6	175-0742	TUBE, 0.52ID 1.75OD 01.6L, STL (Tennant Industrial)	1
7	175-0716	Clevis pin	1
8	999-0497	Nut M6-1 nylon insert lock stainless steel	2
9	175-3281	Cotter pin	1
10	175-0743	PIN, CLEVIS, 0.38D X 2.50L (Tennant Industrial)	1
11	175-0744	Clevis pin .37D x 1 5/16	1
12	999-0355	175-2249	2
13	175-6176	Cotter pin	2
14	175-0745	BUMPER, RBR, 1.5D 0.63 0.31H (Tennant Industrial)	2
15	999-1312	Screw M6-1 x 20mm hex head stainless steel	2
16	275-9319	LINK ASSY, ROD-END, .63-18 (Tennant Industrial)	4	(after SN 003695)
17	999-0403	Nut 5/8-18 nylon insert lock grade 8 yellow zinc	8	(after SN 003695)
18	275-9320	Rod-end tube (gray) (Tennant Industrial)	8	(after SN 003695)

Scrub Head Linkage Assembly - Disc - Max Pro 1200

Click to enlarge

#	Part	Description	Req	Notes
1a	275-2563	Rod-end link assembly (Tennant Industrial)	2	(replaced by 1b) (before SN 003696)
1b	675-2140	LINK KIT, ROD-END, 8.65, CI (Tennant Industrial)	2
2	275-2563	Rod-end link assembly (Tennant Industrial)	2	(before SN 003696)
3	175-2040	Cotter pin	4	(before SN 003696)
4a	275-8346	GUARD, KICK IN, SCB HEAD (Tennant Industrial)	1	(before SN 005000)
4b	275-9318	Scrub head kick in guard (iron gray) (Tennant Industrial)	1	(after SN 004999)
5	175-0742	TUBE, 0.52ID 1.75OD 01.6L, STL (Tennant Industrial)	1
6	175-0716	Clevis pin	1
7	999-0519	Nut M12-1.75 nylon insert lock stainless steel	2	(before SN 003696)
8	175-3281	Cotter pin	1
9	175-0743	PIN, CLEVIS, 0.38D X 2.50L (Tennant Industrial)	1
10	175-0744	Clevis pin .37D x 1 5/16	1
11	999-0355	175-2249	4
12	175-6176	Cotter pin	2
13a	275-8595	BUMPER, SIDE, SCB HEAD, WIDE (Tennant Industrial)	1	(before SN 005000)
13b	275-2558	Scrub head side bumper (gray) (Tennant Industrial)	1	(after SN 004999)
14	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	4
15	999-0024	Washer 5/16 flat stainless steel	6
16	275-8596	TREAD, NON-SKID, 05.8W 12.5L, BMPR, SIDE (Tennant Industria	1
17a	275-8597	BRACKET, ADAPTER, MTG, KICK IN, FRAME (Tennant Industrial)	1	(before SN 005000)
17b	275-2559	Frame bracket adapter (Tennant Industrial)	1	(after SN 004999)
18	999-1372	Bolt M10-1.5 x 25mm hex head stainless steel	2
19	999-1120	Nut M10-1.5 nylon insert lock stainless steel	1
20a	275-8598	BRACKET, STEP (Tennant Industrial)	1	(before SN 005000)
20b	275-2560	Step bracket (gray) (Tennant Industrial)	1	(after SN 004999)
21	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	4
22	999-0355	175-2249	8
23	275-8599	TREAD, NON-SKID, STEP, 04.5W 05.6L (Tennant Industrial)	1
24	N/A	Not available	2	(plate spacer) (before SN 003696)
25	175-0647	SCREW, HEX, M12 X 1.75 X 40, 8.8 (Tennant Industrial)	2	(before SN 003696)
26a	275-8600	GUARD WLDT, SQGE, REAR [MP1200] (Tennant Industrial)	1	(before SN 005000)
26b	275-2561	Rear squeegee guard weldment (gray) (Tennant Industrial)	1	(after SN 004999)
27	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	4
28	275-8601	FITTING, GREASE, E90 PM04 .75L (Tennant Industrial)	4	(before SN 003696)
29	999-0114	Washer 1/2 SAE flat	4	(before SN 003696)
30a	675-0181	GUARD KIT, SQGE, REAR, CI [7300/8300] (Tennant Industrial)	1	(includes 30c, 31-33) (before SN 005000)
30b	575-5987	GUARD KIT, SQGE, REAR, IRON GRAY, CI (Tennant Industrial)	1	(includes 30d, 31-33) (after SN 004999)
30c	275-8602	GUARD, BMPR (Tennant Industrial)	1	(before SN 005000)
30d	275-2562	Bumper guard (gray) (Tennant Industrial)	1	(after SN 004999)
31	999-0309	Bolt M8-1.25 x 50mm hex head part thread zinc	2
32	999-0496	Nut M8-1.25 nylon insert lock stainless steel	2
33	999-0024	Washer 5/16 flat stainless steel	4
34	275-2563	Rod-end link assembly (Tennant Industrial)	2	(after SN 003695)
35	275-9320	Rod-end tube (gray) (Tennant Industrial)	4	(after SN 003695)
36	999-0403	Nut 5/8-18 nylon insert lock grade 8 yellow zinc	4	(after SN 003695)

Seat Assembly

Click to enlarge

#	Part	Description	Req	Notes
1a	275-9328	Seat kit (includes screw and spacer)	1	(before SN 003622)
1b	N/A	Not available	1	(seat kit replacement) (between SN 003622 and SN 006131)
1c	275-6563	Seat kit	1	(after SN 006131)
2	175-2367	Steel plated washer	8	(before SN 003622)
3	175-3174	12 1/2 inch adjustable seat slide track	1
4	275-2671	11 1/2 inch seat adjuster rail (Tennant Industrial)	1
5	999-0355	175-2249	14
6a	999-0399	Screw 5/16-18 x 3/4 pan head phillips zinc plated	4	(before SN 003622)
6b	275-9278	SCREW, PAN, PHL, .31-18 X 1.00, G2 (Tennant Industrial)	4	(after SN 003621)
7	999-0211	Nut 5/16-18 hex nylon insert lock zinc plated	4
8	275-7956	Iron seat plate (Tennant Industrial)	1
9	175-0596	Seat switch	1	(before SN 003622)
10	999-0784	Screw M8-1.25 x 16mm hex head stainless steel	6
11	175-2162	Nylon wire tie	1
12	275-9333	Spacer	4	(after SN 003621)
13	275-9280	Seat switch	1	(after SN 003621)
14	275-8585	SEAT KIT, SUSPENSION, CI (Tennant Industrial)	1	(includes 15-17)
15	275-0165	Suspension seat	1
16	999-0024	Washer 5/16 flat stainless steel	4
17	999-0211	Nut 5/16-18 hex nylon insert lock zinc plated	4

Seat Belt Assembly

Click to enlarge

#	Part	Description	Req	Notes
0	275-8584	SEATBELT KIT, CI [7300 / 8300] (Tennant Industrial)	1	(includes 1-4)
1	275-0167	Seat belt	1
2	175-6774	Screw M10-1 1/2 x 20 hex	2
3	999-0187	Washer 1/2 flat plain finish	2
4	999-1120	Nut M10-1.5 nylon insert lock stainless steel	2

Side Brush Lift Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	275-7985	Side brush housing weldment (gray) (Tennant Industrial)	1
2	475-0452	SCREW, FLT, SOC, M10	3
3	175-2116	Clevis pin	2
4	175-2590	Stroke actuator	1
5	275-3031	PIN, CLEVIS, 0.37D X 4.00L (Tennant Industrial)	1
6	175-6176	Cotter pin	1
7	275-7986	Iron bracket (gray) (Tennant Industrial)	1
8	275-8369	PIN, CLEVIS, 0.50D X 4.00L (Tennant Industrial)	2
9	999-0114	Washer 1/2 SAE flat	8
10	175-3281	Cotter pin	4
11	275-7987	Iron channel (gray) (Tennant Industrial)	1
12	175-3335	Flanged bushing	2
13	275-7988	Iron bracket (gray) (Tennant Industrial)	1
14	999-0024	Washer 5/16 flat stainless steel	2
15	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	2
16	275-8372	BLOCK, ADJ (Tennant Industrial)	1
17	275-0142	SHAFT, THRD (Tennant Industrial)	1
18	275-8373	WASHER, FLAT, 0.81B 1.24D .03, STL, PL (Tennant Industrial)	1
19	175-3287	Flanged bushing	1
20	999-1281	Nut M10-1.25 hex fine thread	1
21	275-0141	KNOB, STAR, 2.50D 5EAR 1.5L .38-16,PLSTC (Tennant Industria	1
22	275-7989	Iron pivot bracket (gray) (Tennant Industrial)	1
23	999-0120	Washer 3/8 SAE flat	2
24	175-0784	Thrust bearing	4
25	175-2814	Spacer	2	(right)
26	999-0032	Washer 3/8 USS flat plain finish	1	(right)

Solution Control Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	175-0683	HANDLE WLDT, CNTRL, SOLTN (Tennant Industrial)	1
2	175-2099	Flanged bushing	2
3	275-7965	Iron water handle bracket (gray) (Tennant Industrial)	1
4	275-7966	Iron water hose bracket weldment (gray) (Tennant Industrial)	1
5	999-0783	Screw M8-1.25 x 16mm hex head	5
6	999-0024	Washer 5/16 flat stainless steel	4
7	275-7967	Iron control cable bracket (gray) (Tennant Industrial)	1
8	999-0471	Nut M8-1.25 nylon insert lock zinc plated	1
9	175-0687	KNOB, BALL, 1.38D 0.50-20, PLSTC (Tennant Industrial)	1
10	175-3424	Clevis 10-32 adjustment	2
11	175-0688	Push pull cable (Tennant Industrial)	1
12	275-7968	Iron water valve lever (gray) (Tennant Industrial)	1
13	275-8341	VALVE, BALL, PF12, BRS, RWK 12060 (Tennant Industrial)	1
14	999-0998	Washer #10 flat stainless steel	2
15	175-0691	SCREW, HEX, 10-24 X 0.50, SS (Tennant Industrial)	2
16a	275-8342	BRACKET, GUARD (Tennant Industrial)	1	(before SN 005000)
16b	275-9310	Guard bracket (iron gray) (Tennant Industrial)	1	(after SN 004999)
17	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	1
18	999-0497	Nut M6-1 nylon insert lock stainless steel	1
19	999-1087	Bolt M6-1 x 25mm hex head stainless steel	1
20	999-0725	Nut 7/16-20 nylon insert lock zinc plated	1

Solution Tank Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	275-9287	Tank mounting bracket (iron gray) (Tennant Industrial)	1
2	999-0355	175-2249	9
3	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	7
4	175-0657	FITTING, PLSTC, PF16/PF16, BH (Tennant Industrial)	1
5	175-0658	Strain plastic fitting	1
6	175-0659	FITTING, PLSTC, E90, BM16/PM16 (Tennant Industrial)	1
7	175-0660	HOSE, PVC, BRD, 1.00ID 1.38OD 003.5L,CLR (Tennant Industria	1
8	175-2254	Hose clamp	4
9	175-0661	FITTING, PLSTC, TEE, BM16/PF12/BM16, BR (Tennant Industrial	1
10	175-0662	90 degree plastic fitting	1
11	175-0663	FITTING, PLSTC, STR, PM12/PM12 1.60L (Tennant Industrial)	2
12	175-0664	Plastic tee fitting	2
13	175-0665	HOSE, PVC, BRD, 1.00ID 1.38OD 002.3L,CLR (Tennant Industria	1
14	175-0666	FITTING, PLSTC, STR, BM16/PM12 (Tennant Industrial)	1
15	175-2247	Plastic fitting	2
16	175-0667	PIN, HINGE, COVER (Tennant Industrial)	1
17	175-0668	SPRING, COVER (Tennant Industrial)	1
18	175-0669	CAP, VINYL, 0.26D, 0.38L RED (Tennant Industrial)	2
19a	275-9288	TANK KIT, SOLTN, W/ LABEL, REPLMT [7300] (Tennant Industria	1	(before SN 005000)
19b	275-9289	Solution tank kit with label (teal) (Tennant Industrial)	1	(after SN 004999)
20a	275-9290	Solution cover kit with gasket (Tennant Industrial)	1	(before SN 005000) (includes 21a)
20b	275-9291	Solution cover kit with gasket (teal) (Tennant Industrial)	1	(after SN 004999) (includes 21a)
21a	175-0670	GASKET, CELR URE, .50, 05.94W 08.88L,ADH (Tennant Industria	1
21b	175-0672	COVER, TANK, SOLTN (Tennant Industrial)	1
22	175-0673	HANDLE (Tennant Industrial)	1
23	175-0674	BAR (Tennant Industrial)	1
24	175-0675	Valve check kit	1
25	175-0676	Cap plug	1
26a	175-0677	CHANNEL, .19, 2.5W 1.0 29.3L, H&S (Tennant Industrial)	1	(before SN 005000)
26b	275-9292	Channel (Tennant Industrial)	1	(after SN 004999)
27	999-0355	175-2249	2
28	999-0246	Bolt M10-1.5 x 35mm hex head full thread	2
29	175-0678	BRACKET [FULL] (Tennant Industrial)	1
30	175-2896	Washer 5/16	1
31	999-0785	Screw M8-1.25 x 30mm hex head stainless steel	1
32	175-3384	Tank cap	1
33	275-4663	Gasket	1
34	175-3414	Tank cover	1
35	175-3408	Solution filter	1
36	175-0680	Strain plastic fitting	1
37	999-0496	Nut M8-1.25 nylon insert lock stainless steel	1
38	175-0681	Level sensing grommet	1	(before SN 001987)
39	175-0682	Plastic plug fitting	1	(before SN 001987)
40	175-5222	Attention users decal (FaST)	1	(after SN 001986)
41	275-8326	SWITCH KIT, PRESS, W/34INCH TUBE, REPLMT (Tennant Industria	1	(after SN 001986)

Solution Valve Assembly - Cylindrical - Max Pro 1000

Click to enlarge

#	Part	Description	Req
1	675-0825	VALVE, WATER, SOLENOID - 36V (Tennant Industrial)	1
2	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	2
3	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	2
4	999-0497	Nut M6-1 nylon insert lock stainless steel	2
5	275-2568	Iron angle (gray) (Tennant Industrial)	2
6	175-2260	P clamp	3
7	999-0784	Screw M8-1.25 x 16mm hex head stainless steel	7
8	999-0471	Nut M8-1.25 nylon insert lock zinc plated	5
9	999-0355	175-2249	9
10	175-0749	HOSE, PVC, BRD, 0.75ID 1.03OD 044.5L,CLR (Tennant Industria	1
11	275-2183	FITTING, PLSTC, E90, BM12/BM12 (Tennant Industrial)	3
12	275-8642	PVC hose clear (Tennant Industrial) (OBSOLETE)	1
13	275-8643	PVC hose clear (Tennant Industrial) (OBSOLETE)	1
14	275-2185	FITTING, PLSTC, TEE, BM12/BM12/BM12 (Tennant Industrial)	1
15	275-8644	PVC hose clear(Tennant Industrial) (OBSOLETE)	1
16	175-2254	Hose clamp	6
17	275-2184	HOSE, PVC, BRD, 0.75ID 1.03OD 002.0L,CLR (Tennant Industria	1

Solution Valve Assembly - Cylindrical - Max Pro 1000 - FaST/ec-H2O

Click to enlarge

#	Part	Description	Req	Notes
1	675-0825	VALVE, WATER, SOLENOID - 36V (Tennant Industrial)	1
2	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	2
3	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	2
4	999-0497	Nut M6-1 nylon insert lock stainless steel	2
5	275-2568	Iron angle (gray) (Tennant Industrial)	2
6	175-2260	P clamp	2
7	999-0784	Screw M8-1.25 x 16mm hex head stainless steel	5
8	999-0471	Nut M8-1.25 nylon insert lock zinc plated	3
9	999-0355	175-2249	7
10	275-8347	HOSE, AFMKT, PVC, BRD, 0.75ID, 08FT, CLR (Tennant Industria	1
11	275-2183	FITTING, PLSTC, E90, BM12/BM12 (Tennant Industrial)	3
12	275-8607	HOSE, AFMKT, PVC, BRD, 0.75ID, 01FT, CLR (Tennant Industria	1
13	175-5229	HOSE, AFMKT, PVC, BRD, 0.50ID, 02FT, CLR (Tennant Industria	1
14	275-8648	FITTING, PLSTC, STR, BM12/PM08, NYL (Tennant Industrial)	1
15	175-5249	Hose 1/2 x 1 foot (Tennant Industrial)	1
16	175-2254	Hose clamp	6
17	275-9085	FITTING, PLSTC, E90, PF08/PF08 (Tennant Industrial)	1
18	175-5240	FITTING, PLSTC, Y, BM08/BM08/BM08, NYL (Tennant Industrial)	1
19	275-8649	TUBE ASSY, BAR, SPRAY, 28.0L (Tennant Industrial)	1
20	275-0563	CLAMP, CABLE, STL, 0.75D X 0.75W, 1HOLE	1
21	275-2569	Spray bar bracket (Tennant Industrial)	1
22	999-0783	Screw M8-1.25 x 16mm hex head	2
23	999-0032	Washer 3/8 USS flat plain finish	2
24	175-6924	Plastic strainer fitting	1
25	175-5241	90 degree elbow	1
26	175-6081	Hose clamp	6
27	275-4310	FITTING, PLSTC, STR, BM08/PM04 (Tennant Industrial)	1
28	275-9306	HOUSING, CPLG, QF / PM08 (Tennant Industrial)	1	(after SN 003746)

Solution Valve Assembly - Cylindrical - Max Pro 1200

Click to enlarge

#	Part	Description	Req
1	675-0825	VALVE, WATER, SOLENOID - 36V (Tennant Industrial)	1
2	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	2
3	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	2
4	999-0497	Nut M6-1 nylon insert lock stainless steel	2
5	275-2568	Iron angle (gray) (Tennant Industrial)	2
6	175-2260	P clamp	3
7	999-0784	Screw M8-1.25 x 16mm hex head stainless steel	7
8	999-0471	Nut M8-1.25 nylon insert lock zinc plated	5
9	999-0355	175-2249	9
10	175-0749	HOSE, PVC, BRD, 0.75ID 1.03OD 044.5L,CLR (Tennant Industria	1
11	275-2183	FITTING, PLSTC, E90, BM12/BM12 (Tennant Industrial)	3
12	275-8642	PVC hose clear (Tennant Industrial) (OBSOLETE)	1
13	275-8643	PVC hose clear (Tennant Industrial) (OBSOLETE)	1
14	275-2185	FITTING, PLSTC, TEE, BM12/BM12/BM12 (Tennant Industrial)	1
15	275-8644	PVC hose clear(Tennant Industrial) (OBSOLETE)	1
16	175-2254	Hose clamp	6
17	275-2184	HOSE, PVC, BRD, 0.75ID 1.03OD 002.0L,CLR (Tennant Industria	1

Solution Valve Assembly - Cylindrical - Max Pro 1200 - FaST/ec-H2O

Click to enlarge

#	Part	Description	Req	Notes
1	675-0825	VALVE, WATER, SOLENOID - 36V (Tennant Industrial)	1
2	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	2
3	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	2
4	999-0497	Nut M6-1 nylon insert lock stainless steel	2
5	275-2568	Iron angle (gray) (Tennant Industrial)	2
6	175-2260	P clamp	2
7	999-0784	Screw M8-1.25 x 16mm hex head stainless steel	5
8	999-0471	Nut M8-1.25 nylon insert lock zinc plated	3
9	999-0355	175-2249	7
10	275-8347	HOSE, AFMKT, PVC, BRD, 0.75ID, 08FT, CLR (Tennant Industria	1
11	275-2183	FITTING, PLSTC, E90, BM12/BM12 (Tennant Industrial)	3
12	275-8607	HOSE, AFMKT, PVC, BRD, 0.75ID, 01FT, CLR (Tennant Industria	1
13	175-5229	HOSE, AFMKT, PVC, BRD, 0.50ID, 02FT, CLR (Tennant Industria	1
14	275-8648	FITTING, PLSTC, STR, BM12/PM08, NYL (Tennant Industrial)	1
15	175-5249	Hose 1/2 x 1 foot (Tennant Industrial)	1
16	175-2254	Hose clamp	6
17	275-9085	FITTING, PLSTC, E90, PF08/PF08 (Tennant Industrial)	1
18	175-5240	FITTING, PLSTC, Y, BM08/BM08/BM08, NYL (Tennant Industrial)	1
19	275-9086	BAR ASSY, SPRAY (Tennant Industrial)	1
20	275-0563	CLAMP, CABLE, STL, 0.75D X 0.75W, 1HOLE	1
21	275-2582	Spray bar bracket (Tennant Industrial)	1
22	999-0783	Screw M8-1.25 x 16mm hex head	2
23	999-0032	Washer 3/8 USS flat plain finish	2
24	175-6924	Plastic strainer fitting	1
25	175-5241	90 degree elbow	1
26	175-6081	Hose clamp	6
27	275-4310	FITTING, PLSTC, STR, BM08/PM04 (Tennant Industrial)	1
28	275-9306	HOUSING, CPLG, QF / PM08 (Tennant Industrial)	1	(after SN 003746)

Solution Valve Assembly - Disc - Max Pro 1000

Click to enlarge

#	Part	Description	Req	Notes
1	675-0825	VALVE, WATER, SOLENOID - 36V (Tennant Industrial)	1
2	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	2
3	999-0123	Washer 1/4 SAE flat zinc plated	4
4	999-0497	Nut M6-1 nylon insert lock stainless steel	2
5	175-0747	Plastic fitting tee (Tennant Industrial)	1	(before SN 001987)
6	175-0752	Hose	1	(before SN 001987)
7	275-2184	HOSE, PVC, BRD, 0.75ID 1.03OD 002.0L,CLR (Tennant Industria	1
8	175-0199	Hose clamp	6
9	175-0750	Fitting (Tennant Industrial)	2
10	175-2226	Nylon wire tie	2
11	175-0749	HOSE, PVC, BRD, 0.75ID 1.03OD 044.5L,CLR (Tennant Industria	2
12	175-3179	P clamp	2
13	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	2
14	999-0355	175-2249	2
15	175-2162	Nylon wire tie	2
16	175-2254	Hose clamp	2
17	275-8606	MANIFOLD, CNTRL, SOLTN (Tennant Industrial)	1	(after SN 001986)
18	275-2183	FITTING, PLSTC, E90, BM12/BM12 (Tennant Industrial)	1	(after SN 001986)
19	175-6081	Hose clamp	4	(after SN 001986)
20	175-6924	Plastic strainer fitting	2	(after SN 001986)
21	275-8605	Plastic cap fitting	2	(after SN 001986)
22	175-5233	Plastic fitting	1	(after SN 001986)
23	175-5209	FITTING, PLSTC, STR, BM08/BM08 (Tennant Industrial)	1	(after SN 001986)
24	175-5229	HOSE, AFMKT, PVC, BRD, 0.50ID, 02FT, CLR (Tennant Industria	1	(after SN 001986)

Solution Valve Assembly - Disc - Max Pro 1000 - FaST/ec-H2O

Click to enlarge

#	Part	Description	Req
1	675-0825	VALVE, WATER, SOLENOID - 36V (Tennant Industrial)	1
2	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	2
3	999-0123	Washer 1/4 SAE flat zinc plated	4
4	999-0497	Nut M6-1 nylon insert lock stainless steel	2
5	275-8606	MANIFOLD, CNTRL, SOLTN (Tennant Industrial)	1
6	275-2184	HOSE, PVC, BRD, 0.75ID 1.03OD 002.0L,CLR (Tennant Industria	1
7	275-8347	HOSE, AFMKT, PVC, BRD, 0.75ID, 08FT, CLR (Tennant Industria	1
8	175-0199	Hose clamp	10
9	175-0750	Fitting (Tennant Industrial)	2
10	175-2226	Nylon wire tie	2
11	175-0749	HOSE, PVC, BRD, 0.75ID 1.03OD 044.5L,CLR (Tennant Industria	2
12	175-3179	P clamp	2
13	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	2
14	999-0355	175-2249	2
15	175-2162	Nylon wire tie	2
16	175-6081	Hose clamp	6
17	275-2183	FITTING, PLSTC, E90, BM12/BM12 (Tennant Industrial)	1
18	175-5209	FITTING, PLSTC, STR, BM08/BM08 (Tennant Industrial)	2
19	175-6924	Plastic strainer fitting	1
20	275-8605	Plastic cap fitting	1
21	175-5233	Plastic fitting	1
22	175-5249	Hose 1/2 x 1 foot (Tennant Industrial)	1
23	275-4310	FITTING, PLSTC, STR, BM08/PM04 (Tennant Industrial)	1
24	275-9306	HOUSING, CPLG, QF / PM08 (Tennant Industrial)	1

Solution Valve Assembly - Disc - Max Pro 1200

Click to enlarge

#	Part	Description	Req	Notes
1	675-0825	VALVE, WATER, SOLENOID - 36V (Tennant Industrial)	1
2	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	2
3	999-0123	Washer 1/4 SAE flat zinc plated	4
4	999-0497	Nut M6-1 nylon insert lock stainless steel	2
5	275-8603	FITTING, PLSTC, E90, BM12/PM08 (Tennant Industrial)	1	(before SN 001987)
6	275-2227	FITTING, PLSTC, MANIFOLD, BM06/PF08 [4] (Tennant Industrial	1	(before SN 001987)
7	275-8604	CAP, RBR, 0.50ID 1.18L BLK (Tennant Industrial)	1	(before SN 001987)
8	175-6081	Hose clamp	1	(before SN 001987)
9	275-2184	HOSE, PVC, BRD, 0.75ID 1.03OD 002.0L,CLR (Tennant Industria	1
10	175-0749	HOSE, PVC, BRD, 0.75ID 1.03OD 044.5L,CLR (Tennant Industria	1
11	175-0199	Hose clamp	4
12	175-5209	FITTING, PLSTC, STR, BM08/BM08 (Tennant Industrial)	3
13	275-2230	FITTING, PLSTC, RST, .50OD/.31ID (Tennant Industrial)	3
14	175-9685	Vinyl braided hose .5id .8od 18l	1
15	175-5229	HOSE, AFMKT, PVC, BRD, 0.50ID, 02FT, CLR (Tennant Industria	1
16	175-9681	HOSE, PVC, BRD, 0.50ID 0.73OD 033.0L,CLR (Tennant Industria	1
17	175-3168	P clamp	4
18	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	4
19	999-0355	175-2249	4
20	175-2162	Nylon wire tie	3
21	175-2226	Nylon wire tie	2
22	175-6924	Plastic strainer fitting	1	(after SN 001986)
23	275-8605	Plastic cap fitting	1	(after SN 001986)
24	175-6081	Hose clamp	7	(after SN 001986)
25	275-8606	MANIFOLD, CNTRL, SOLTN (Tennant Industrial)	1	(after SN 001986)
26	175-5209	FITTING, PLSTC, STR, BM08/BM08 (Tennant Industrial)	1	(after SN 001986)
27	175-5233	Plastic fitting	2	(after SN 001986)
28	175-2159	Hose clamp	1	(after SN 001986)
29	275-2183	FITTING, PLSTC, E90, BM12/BM12 (Tennant Industrial)	1	(after SN 001986)

Solution Valve Assembly - Disc - Max Pro 1200 - FaST/ec-H2O

Click to enlarge

#	Part	Description	Req	Notes
1	675-0825	VALVE, WATER, SOLENOID - 36V (Tennant Industrial)	1
2	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	2
3	999-0123	Washer 1/4 SAE flat zinc plated	4
4	999-0497	Nut M6-1 nylon insert lock stainless steel	2
5	275-2183	FITTING, PLSTC, E90, BM12/BM12 (Tennant Industrial)	1
6	275-8606	MANIFOLD, CNTRL, SOLTN (Tennant Industrial)	1
7	175-6081	Hose clamp	9
8	175-5233	Plastic fitting	2
9	275-8607	HOSE, AFMKT, PVC, BRD, 0.75ID, 01FT, CLR (Tennant Industria	1
10	275-8347	HOSE, AFMKT, PVC, BRD, 0.75ID, 08FT, CLR (Tennant Industria	1
11	175-0199	Hose clamp	5
12	175-5209	FITTING, PLSTC, STR, BM08/BM08 (Tennant Industrial)	5
13	275-2230	FITTING, PLSTC, RST, .50OD/.31ID (Tennant Industrial)	3
14	175-5229	HOSE, AFMKT, PVC, BRD, 0.50ID, 02FT, CLR (Tennant Industria	3
15	275-1192	Hose 1/2 x 3 foot (Tennant Industrial)	1
16	175-2226	Nylon wire tie	2
17	175-3168	P clamp	4
18	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	4
19	999-0355	175-2249	4
20	175-2162	Nylon wire tie	3
21	275-4310	FITTING, PLSTC, STR, BM08/PM04 (Tennant Industrial)	1
22	275-9306	HOUSING, CPLG, QF / PM08 (Tennant Industrial)	1	(after SN 003746)

Squeegee Assembly - Urethane

Click to enlarge

#	Part	Description	Req	Notes
0a	275-2651	Squeegee blade kit 40 inch urethane (Tennant Industrial)	1	(includes 1a, 2-3) (Max Pro 1000)
0b	275-2648	Squeegee blade kit 48 inch urethane (Tennant Industrial)	1	(includes 1b, 2-3) (Max Pro 1200)
1a	275-2652	Squeegee blade 40 inch rear urethane (Tennant Industrial)	1	(Max Pro 1000)
1b	275-2649	Squeegee blade 48 inch rear urethane (Tennant Industial)	1	(Max Pro 1200)
2	275-2653	Squeegee blade 40 inch front urethane (Tennant Industrial)	1
3	275-7363	SQUEEGEE, SIDE, URE [7300/830] (Tennant Industrial)	2

Steering Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	175-0570	KNOB, 1.12D 3.88L M08 X 1.25, PLSTC[TPR] (Tennant Industria	1
2	175-0571	Pin (Tennant Industrial) (OBSOLETE)	1
3	175-0572	BUSHING, FLNG, 0.50B 0.62D 0.25L (Tennant Industrial)	1
4	175-0573	SPRING, TORS (Tennant Industrial)	1
5	175-0574	Bolt 6mm-1 x 35 hex head	1
6	999-0469	Nut M6-1 nylon insert lock zinc plated	1
7	275-4653	Steering wheel	1
8	175-3203	Upper steering shaft	1
9	175-3200	Square keyway	5
10	999-0187	Washer 1/2 flat plain finish	2
11	999-0519	Nut M12-1.75 nylon insert lock stainless steel	1
12	175-0575	COLUMN WLDT, STEERING, IRON GRAY (Tennant Industrial)	1
13	175-0576	BUSHING, FLNG, 0.75B 1.00D 1.00L, NYL (Tennant Industrial)	2
14	175-0577	BRACKET WLDT, STEERING, TILT (Tennant Industrial)	1
15	999-0783	Screw M8-1.25 x 16mm hex head	2
16	275-5323	U joint	2	(includes 17)
17	999-0104	Screw 5/16-18 x 1/2 socket head alloy plain finish	8
18	175-0579	HOUSING WLDT, BRG (Tennant Industrial)	1
19	175-3195	Ball bearing	2
20	175-0580	SHAFT, 0.75D 06.0L, 2/.19 KEY, SL (Tennant Industrial)	1
21	175-3198	Woodruff key	1
22	175-0581	Sprocket	1
23	999-0499	Bolt M8-1.25 x 20mm hex head full thread stainless steel	5
24	175-0582	CHAIN, RLR, 40 X 129 PITCHES (Tennant Industrial)	1
25	175-0583	LINK, CHAIN, RLR, 40 (Tennant Industrial)	1
26	175-0584	BRACKET, SPPT, TILT (Tennant Industrial) (OBSOLETE)	1
27	999-0024	Washer 5/16 flat stainless steel	6
28	999-0471	Nut M8-1.25 nylon insert lock zinc plated	2
29	175-0585	TUBE, 0.38ID 0.62OD 00.6L, STL (Tennant Industrial)	2
30	999-0248	Bolt M8-1.25 x 30mm hex head full thread plain finish	2
31	175-0586	SLEEVE, FLNG, 0.38B 1.00/0.48D 1.0L, STL (Tennant Industria	1
32	999-0787	Bolt M8-1.25 x 40mm hex head full thread stainless steel	1
33	175-0588	PLATE WLDT, MTG, IDLER (Tennant Industrial)	1
34	175-0589	BUSHING, FLNG, 0.71B 0.79D 0.47L, NYL (Tennant Industrial)	2
35	175-0590	SPROCKET, 40, 10TOOTH, 0.79B 0.87W (Tennant Industrial)	1
36	999-0549	Washer 5/16 x 3/4 SAE flat stainless steel	1
37	175-0591	Bolt M8-1.25 x 12mm hex head	1
38	175-0592	Bolt M10-1.5 x 40mm hex head	2
39	175-0593	HANDLE WLDT, STEERING, TILT (Tennant Industrial)	1
40	175-0594	SHAFT, 0.75D 02.8L, .19 KEY, SL (Tennant Industrial)	1

Steering Control Valve Breakdown Assembly - 373495

Click to enlarge

#	Part	Description	Req	Notes
0	275-8319	STEER-CONTROL, HYD05, 05.0 2030 (Tennant Industrial)	4	(includes 1-13)
1	275-8802	VR, SCREW, CAP (Tennant Industrial)	1
2	275-8803	VR, CAP, END (Tennant Industrial)	1
3	275-8804	VR, GEROTOR (Tennant Industrial)	1
4	275-8805	VR, SPACER (Tennant Industrial)	1
5	275-8806	VR, PLATE, WEAR (Tennant Industrial)	1
6	275-3414	VR, DRIVE, VALVE, STEERING (Tennant Industrial) (OBSOLETE)	1
7	275-3415	VR, PIN, VALVE, STEERING (Tennant Industrial) (OBSOLETE)	1
8	275-8807	VR, PIN (Tennant Industrial)	1
9	275-8808	Check ball (Tennant Industrial) (OBSOLETE)	1
10	275-3420	VR, RING, RETAINER, STEERING VALVE (Tennant Industrial)	1
11	275-3422	VR, SEAL KIT, STEERING [CL] (Tennant Industrial)	1
12	275-3421	VR, SPRING KIT, SCU [CL] (Tennant Industrial)	1
13	275-8809	VR, BEARING KIT [CL] (Tennant Industrial)	1

Telemetry Assembly - After SN 005973

Click to enlarge

#	Part	Description	Req	Notes
1	275-2615	Telemetry control box assembly kit	1
2	175-3229	Screw 6mm-1 x 16 pan head	4
3	999-0469	Nut M6-1 nylon insert lock zinc plated	4
4	275-2617	400amp shunt (Tennant Industrial)	1
5	175-2895	Screw M5-0.8 x 20mm pan head	2
6	999-0201	Washer 3/8 internal star lock	2
7	175-2894	Nut M5-.8 hex nylon locking	4
8	275-7897	Antenna	1
9	175-0988	P clamp	2
10	275-2618	Screw M5-1 x 16mm hex head black (Tennant Industrial)	2
11	275-2619	Washer flat black (Tennant Industrial)	2
12a	275-2620	Electrical harness (Tennant Industrial)	1	(includes 12b)
12b	275-7904	Fuse (Tennant Industrial)	1
13	275-2621	Cable (black) (Tennant Industrial)	1
14	175-2162	Nylon wire tie	6
15	175-3168	P clamp	1
16	275-7899	Telemetry decal	1

Vacuum Fan Assembly

Click to enlarge

#	Part	Description	Req	Notes
1a	175-0710	BRACKET WLDT, MTG, FAN (Tennant Industrial)	1	(before SN 003473)
1b	275-9316	Mounting fan bracket weldment (iron gray) (Tennant Industri	1	(after SN 003472)
2a	275-5200	36V 3 stage vacuum motor kit	1	(includes 3a, 4-5) (OEM)
2b	991-1202-D	36V 3 stage vacuum motor tangential with Delphi plug	2	(NON-OEM)
3a	164-0881	Vacuum motor gasket	1	(OEM)
3b	991-3029	Vacuum motor gasket	1	(NON-OEM)
4	275-5816	Carbon brush kit (pkg of 2)	1
5	175-6954	Cooling fan cover	1
6	999-0016	Washer 1/4 flat plain finish	6
7	999-0502	Bolt M6-1 x 20mm hex head full thread zinc	6
8	175-3366	Fitting	1
9	175-0698	HOSE, VACUUM, 0.16ID X 006.0L (Tennant Industrial)	1
10	175-0711	SWITCH, VACUUM, DUAL LEVEL (Tennant Industrial)	1
11	175-0712	HOSE, EXHAUST, VACFAN, 2.0ID, 47.0L (Tennant Industrial)	2
12	997-2003	Hose clamp	2
13	175-0713	GASKET, MTG, FAN, .31TH, NEO, ADH (Tennant Industrial)	1
14	175-2367	Steel plated washer	6
15	999-0784	Screw M8-1.25 x 16mm hex head stainless steel	6

Vacuum Wand Assembly

Click to enlarge

#	Part	Description	Req	Notes
0	275-8720	WAND KIT, VACUUM, CI [7300/8300] (Tennant Industrial)	1	(includes 1-10)
1	275-4261	HOSE ASSY, W/2CUFF, 1.5D 090L 1.5/1.5 (Tennant Industrial)	1
2	275-4267	FITTING, PLSTC, STR, BM24/BM32 (Tennant Industrial)	1
3	175-1507	Two piece double bend chrome wand	1
4	N/A	Not available	1	(plastic wand nozzle)
5	275-4264	SHOE, PLSTC, SQGE, 14.0 (Tennant Industrial) (OBSOLETE)	1
6	275-3939	CLIP, GRIP, FINGER, 1.00-1.88D,WHITE VYL (Tennant Industria	2
7	999-1352	Screw 10-14 x 3/4 phillips pan head plastic thread rolling	2
8	999-0377	Washer 6 SAE flat plain finish	6
9	175-3378	Rivet 1/4 x 57/64 plastic	4
10	175-9416	Power bag	1

Vacuumized Debris Tray Assembly - Cylindrical - Max Pro 1000

Click to enlarge

#	Part	Description	Req	Notes
1	275-8664	TRAY, DEBRIS, 40.0L (Tennant Industrial)	1
2	275-8665	CLIP, SPRING, PROP ARM (Tennant Industrial)	1
3	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	14
4	999-0497	Nut M6-1 nylon insert lock stainless steel	2
5	175-8867	SCREW, HEX, M6 X 1.00 X 12, SS (Tennant Industrial)	2
6	275-8666	STRAINER WLDT, TROUGH, DEBRIS,4.3W 15.0L (Tennant Industria	1
7	275-2579	Vacuum tube weldment (gray) (Tennant Industrial)	1
8	999-0497	Nut M6-1 nylon insert lock stainless steel	7
9	275-8668	GASKET, TUBE, 2.50OD .50, FOAM, ADH (Tennant Industrial)	1
10	275-2580	Upper tube weldment (gray) (Tennant)	1
11	999-1312	Screw M6-1 x 20mm hex head stainless steel	7
12a	775-0475	Drain hose assembly (solution)	1	(before SN 001703)
12b	275-8619	HOSE ASSY, W/2CUFF, 1.0D 041L 1.0/1.0 (Tennant Industrial)	1	(after SN 001702)
13	275-8612	TUBE WLDT, TEE, 2.0D 5.8L 1.0D (Tennant Industrial)	1
14a	275-8618	HOSE, VACUUM, 058.5L (Tennant Industrial)	1	(before SN 001703)
14b	275-8613	HOSE ASSY, W/2CUFF, 2.0D 075L 2.0/2.0 (Tennant Industrial)	1	(after SN 001702)
15a	275-8617	HOSE, VACUUM, 2.00ID X 035.0L (Tennant Industrial)	1	(before SN 001703)
15b	275-8614	HOSE ASSY, W/2CUFF, 2.0D 026L 2.0/2.0 (Tennant Industrial)	1	(after SN 001702)
16	275-2578	Iron angle (gray) (Tennant Industrial)	1
17	997-2006	Hose clamp	2
18	175-2254	Hose clamp	1
19	275-8616	BRACKET, TUBE, TEE (Tennant Industrial)	1	(after SN 001702)
20	175-3166	Bolt M6-1 x 16mm hex head	1	(after SN 001702)
21	999-0016	Washer 1/4 flat plain finish	1	(after SN 001702)

Vacuumized Debris Tray Assembly - Cylindrical - Max Pro 1200

Click to enlarge

#	Part	Description	Req	Notes
1	275-8673	TRAY, DEBRIS, 48.0L (Tennant Industrial)	1
2	275-8665	CLIP, SPRING, PROP ARM (Tennant Industrial)	1
3	999-0335	Washer 1/4 x 5/8 SAE flat stainless steel	14
4	999-0497	Nut M6-1 nylon insert lock stainless steel	2
5	175-8867	SCREW, HEX, M6 X 1.00 X 12, SS (Tennant Industrial)	2
6	275-8666	STRAINER WLDT, TROUGH, DEBRIS,4.3W 15.0L (Tennant Industria	1
7	275-2579	Vacuum tube weldment (gray) (Tennant Industrial)	1
8	999-0497	Nut M6-1 nylon insert lock stainless steel	7
9	275-8668	GASKET, TUBE, 2.50OD .50, FOAM, ADH (Tennant Industrial)	1
10	275-2580	Upper tube weldment (gray) (Tennant)	1
11	999-1312	Screw M6-1 x 20mm hex head stainless steel	7
12a	775-0475	Drain hose assembly (solution)	1	(before SN 001703)
12b	275-8619	HOSE ASSY, W/2CUFF, 1.0D 041L 1.0/1.0 (Tennant Industrial)	1	(after SN 00172)
13	275-8612	TUBE WLDT, TEE, 2.0D 5.8L 1.0D (Tennant Industrial)	1
14a	275-8618	HOSE, VACUUM, 058.5L (Tennant Industrial)	1	(before SN 001703)
14b	275-8613	HOSE ASSY, W/2CUFF, 2.0D 075L 2.0/2.0 (Tennant Industrial)	1	(after SN 001702)
15a	275-8617	HOSE, VACUUM, 2.00ID X 035.0L (Tennant Industrial)	1	(before SN 001703)
15b	275-8614	HOSE ASSY, W/2CUFF, 2.0D 026L 2.0/2.0 (Tennant Industrial)	1	(after SN 001702)
16	275-2584	Iron angle (gray) (Tennant Industrial)	1
17	997-2006	Hose clamp	2
18	175-2254	Hose clamp	1
19	275-8616	BRACKET, TUBE, TEE (Tennant Industrial)	1	(after SN 001702)
20	175-3166	Bolt M6-1 x 16mm hex head	1	(after SN 001702)
21	999-0016	Washer 1/4 flat plain finish	1	(after SN 001702)

Water Pump Breakdown Assembly - 387321

Click to enlarge

#	Part	Description	Req	Notes
0	275-8715	PUMP ASSY, WAND, POWER (Tennant Industrial)	1	(includes 1-12)
1	N/A	Not available	1	(seal kit)
2	N/A	Not available	1	(screw)
3	N/A	Not available	1	(screw)
4	275-4346	Cam, bearing, diaphram kit (Tennant Industrial) (OBSOLETE)	1
5	N/A	Not available	1	(piston)
6	375-2586	Diaphragm kit (Tennant Industrial)	1
7	N/A	Not available	1	(check valve assembly)
8	375-2587	Bearing cover	1
9	275-4351	VR, SWITCH ASSY, PUMP, WATER (Tennant Industrial)	1
10	N/A	Not available	1	(pump screw)
11	275-4353	VR, MOTOR, ELE, 36VDC, WATER PUMP (Tennant Industrial)	1
12	275-4354	VR, BRUSH, MOTOR, WATER PUMP (Tennant Industrial)	1
N/S	175-8753	Female connector	2	(included with 0)
N/S	175-8755	TERMINAL, FEM, MP280, SEALED, 18-16GA (Tennant Industrial)	2	(included with 0)
N/S	175-8754	14/16 wire seal	2	(included with 0)