- Batteries and Chargers

#PartDescription ReqNotesAvailability
1 175-1103 Battery cable boot (black) 8
2a 175-2121 Battery terminal cover (clear) 8
2b 275-5948 Battery terminal cover (black) 8
3 998-0010 Battery jumper cable - ring type (red) 3
4 175-3138 Battery cable 5/16 x 3/8 (red) 1
5 175-3137 Battery cable (black) 1
6a 162-0003 6V 225Ah wet battery (SNSR) 4
6b 162-0043 6V 224Ah AGM battery (Group GC2) (SNSR) 4
7a 175-3139 24V 19amp off board battery charger 1 (includes 8-9)
7b 375-0042 24V 19amp battery charger for AGM batteries 1 (includes 8-9)
8 991-9284 50amp charger plug SB50 with pins (red) 1
9 275-0052 16/3 charger extension cord 10 foot 1
15 175-8751 Battery tray 1

- Extractor Fit All Parts

#PartDescription ReqNotesAvailability
001a 991-8000 12 inch stainless head wand, 1 jet 120 PSI plastic valve (wands)
001b 991-8001 12 inch aluminum head wand, 2 jet, 120 PSI (OBSOLETE) (wands)
001c 991-8002 12 inch aluminum head wand, 3 jet, 120 PSI plastic valve (wands)
001d 991-8227 500psi brass valve (wands)
002a 991-8222 30 inch stair wand (open spray) (stair wand)
002b 991-8223 30 inch swivel head ergonomic stair wand (open spray) (stair wand)
004 991-8129 Handle 1-1/2 inch low profile comfort grip assist (wands)
005a 991-8128 120 PSI, acetel plastic valve, low heat 140 degrees (wands)
005b 991-8127 120 PSI, brass valve, stainless steel stem (wands)
005c 991-8226 Valve
005d 991-8171 400psi cast aluminum valve
007 991-8130 3-1/2 inch wide 120 PSI standard detailer, external spray (wands)
008 991-8132 10ft hide-a-hose vac/sol hose assembly w/1/4 male fittings (hose assemblies and parts)
009 991-8133 20ft hide-a-hose vac/sol hose assembly w/1/4 male fittings (hose assemblies and parts)
010 991-8136 10ft hide-a-hose vac/sol hose assembly w 1/4 male & 1/4 feml (hose assemblies and parts)
011 991-8137 20ft hide-a-hose vac/sol hose assembly w/1/4 male & 1/4 feml (hose assemblies and parts)
012 991-8134 10ft hide-a-hose vac/sol hose w/1/4 female fittings 300psi (hose assemblies and parts)
013 991-8135 20ft hide-a-hose vac/sol hose assembly w/1/4 female fittings (hose assemblies and parts)
014 991-8138 10ft 100psi vac/sol hose assembly w/ 1/4 male fittings (hose assemblies and parts)
015 991-8139 20ft 100psi vac/sol hose assembly with male fittings (hose assemblies and parts) (Maximum heat rating of 70 degrees and 100 PSI)
016 991-8142 10ft 100psi vac/sol hose assembly w/1/4 female & 1/4 male (hose assemblies and parts)
017 991-8143 20ft 100psi vac/sol hose assembly w/1/4 female & 1/4 male (hose assemblies and parts)
018 991-8140 10ft 100psi vac/sol hose assembly w/ 1/4 female fittings (hose assemblies and parts)
021 991-8286 1 1/2 inch vacuum hose (sold by the foot) (hose assemblies and parts)
022 991-8005 1 1/2 inch replacement hose cuff (black) (hose assemblies and parts)
023 991-8131 1 1/2 inch hide-a-hose cuff (no swivel) (hose assemblies and parts)
026 991-8045 1/8 inch brass vee jet 8001 (1/8 brass vee jet)
027 991-8046 1/8 inch brass vee jet 8001.5 (1/8 brass vee jet)
028 991-8047 1/8 inch brass vee jet 8002 (1/8 brass vee jet)
029 991-8048 1/8 inch brass vee jet 8003 (1/8 brass vee jet)
030 991-8049 1/8 inch brass vee jet 8004 (1/8 brass vee jet)
031 991-8050 1/8 inch brass vee jet 8005 (OBSOLETE) (1/8 brass vee jet)
032 991-8051 1/8 inch brass vee jet 8006 (1/8 brass vee jet)
033 991-8052 1/8 inch brass vee jet 8008 (1/8 brass vee jet)
034 991-8053 1/8 inch brass vee jet 8010 (1/8 brass vee jet)
035 991-8054 1/8 inch brass vee jet 9502 (1/8 brass vee jet)
036 991-8055 1/8 inch brass vee jet 9503 (1/8 brass vee jet)
037 991-8056 1/8 inch brass vee jet 9504 (1/8 brass vee jet)
038 991-8057 1/8 inch brass vee jet 9505 (1/8 brass vee jet)
039 991-8058 1/8 inch brass vee jet 9506 (1/8 brass vee jet)
040 991-8059 1/8 inch brass vee jet 9508 (1/8 brass vee jet)
041 991-8060 1/8 inch brass vee jet 11001 (1/8 brass vee jet)
042 991-8061 1/8 inch brass vee jet 11001.5 (1/8 brass vee jet)
043 991-8062 1/8 inch brass vee jet 11002 (1/8 brass vee jet)
044 991-8063 1/8 inch brass vee jet 11003 (1/8 brass vee jet)
045 991-8064 1/8 inch brass vee jet 11004 (1/8 brass vee jet)
046 991-8065 1/8 inch brass vee jet 11005 (1/8 brass vee jet)
047 991-8066 1/8 inch brass vee jet 11006 (1/8 brass vee jet)
048 991-8067 1/8 inch brass vee jet 11008 (1/8 brass vee jet)
049 991-8068 1/8 inch brass vee jet 11010 (1/8 brass vee jet)
050 991-8021 1/4 inch brass vee jet 8001 (1/4 brass vee jet)
051 991-8022 1/4 inch brass vee jet 8001.5 (1/4 brass vee jet)
052 991-8023 1/4 inch brass vee jet 8002 (1/4 brass vee jet)
053 991-3005 1/4 inch brass vee jet 8003 (1/4 brass vee jet)
054 991-8025 1/4 inch brass vee jet 8004 (1/4 brass vee jet)
055 991-8026 1/4 inch brass vee jet 8005 (1/4 brass vee jet)
056 991-8027 1/4 inch brass vee jet 8006 (1/4 brass vee jet)
057 991-8028 1/4 inch brass vee jet 8008 (1/4 brass vee jet)
058 991-8029 1/4 inch brass vee jet 8010 (1/4 brass vee jet)
059 991-8030 1/4 inch brass vee jet 9502 (1/4 brass vee jet)
060 991-8031 1/4 inch brass vee jet 9503 (1/4 brass vee jet)
061 991-8032 1/4 inch brass vee jet 9504 (1/4 brass vee jet)
062 991-8033 1/4 inch brass vee jet 9505 (1/4 brass vee jet)
063 991-8034 1/4 inch brass vee jet 9506 (1/4 brass vee jet)
064 991-8035 1/4 inch brass vee jet 9508 (1/4 brass vee jet)
065 991-8036 1/4 inch brass vee jet 11001 (1/4 brass vee jet)
066 991-8037 1/4 inch brass vee jet 11001.5 (1/4 brass vee jet)
067 991-8038 1/4 inch brass vee jet 11002 (1/4 brass vee jet)
068 991-8039 1/4 inch brass vee jet 11003 (1/4 brass vee jet)
069 991-8040 1/4 inch brass vee jet 11004 (1/4 brass vee jet)
070 991-8041 1/4 inch brass vee jet 11005 (OBSOLETE) (1/4 brass vee jet)
071 991-8042 1/4 inch brass vee jet 11006 (1/4 brass vee jet)
072 991-3006 1/4 inch brass vee jet 11008 (1/4 brass vee jet)
073 991-8044 1/4 inch brass vee jet 11010 (1/4 brass vee jet)
074 991-8069 1/4 inch stainless vee jet 8001 (1/4 stainless vee jet)
075 991-8070 1/4 inch stainless vee jet 8002 (1/4 stainless vee jet)
076 991-8071 1/4 inch stainless vee jet 8003 (1/4 stainless vee jet)
077 991-8072 1/4 inch stainless vee jet 8004 (1/4 stainless vee jet)
078 991-8073 1/4 inch stainless vee jet 9501 (1/4 stainless vee jet)
079 991-8074 1/4 inch stainless vee jet 9502 (1/4 stainless vee jet)
080 991-8085 1/4 inch stainless/plastic tee jet 9502 (1/4 stainless vee jet)
081 991-8076 1/4 inch stainless vee jet 9504 (1/4 stainless vee jet)
082 991-8077 1/4 inch stainless vee jet 11003 (1/4 stainless vee jet)
083 991-8078 1/4 inch stainless vee jet 11004 (1/4 stainless vee jet)
084 991-8079 1/4 inch stainless vee jet 11006 (1/4 stainless vee jet)
085 991-8080 1/4 inch stainless vee jet 11008 (1/4 stainless vee jet)
086 991-8081 1/4 inch stainless/plastic tee jet 8002 (1/4 stainless/plastic tee jet)
087 991-8082 1/4 inch stainless/plastic tee jet 8003 (1/4 stainless/plastic tee jet)
088 991-8083 1/4 inch stainless/plastic tee jet 8004 (1/4 stainless/plastic tee jet)
089 991-8084 1/4 inch stainless/plastic tee jet 9501 (OBSOLETE) (1/4 stainless/plastic tee jet)
090 991-8085 1/4 inch stainless/plastic tee jet 9502 (1/4 stainless/plastic tee jet)
091 991-8086 1/4 inch stainless/plastic tee jet 9504 (1/4 stainless/plastic tee jet)
092 991-3010 1/4 inch stainless/plastic tee jet 11003 (1/4 stainless/plastic tee jet)
093 991-8088 1/4 inch stainless/plastic tee jet 11004 (1/4 stainless/plastic tee jet)
094 991-8089 1/4 inch stainless/plastic tee jet 11006 (1/4 stainless/plastic tee jet)
095 991-8090 1/4 inch stainless/plastic tee jet 11008 (1/4 stainless/plastic tee jet)
096 991-8091 1/4 inch x 1/8 hex nipple H21
097 991-8092 1/4 inch x 1/4 hex nipple H22
098 991-8093 1/4 inch x 3/8 hex nipple H23
099 991-8094 45 degree street elbow 1/4 inch H24
100 991-8095 45 degree street elbow 1/8 inch H25
101 991-8096 45 degree union elbow 1/4 inch H26
102 991-8098 90 degree street elbow short 1/4 inch H28
103 991-8098 90 degree street elbow short 1/4 inch H28
104 991-8099 90 degree street elbow 1/8 inch H29
105 991-8100 90 degree street elbow short 1/8 inch H30 (OBSOLETE)
106 991-8101 90 degree union elbow 1/4 inch H31
107 991-8102 90 degree union elbow 1/8 inch H32
108 991-8103 30 degree union elbow 1/4 inch H33
109 991-8104 1/4 inch coupling H34
110 991-8105 1/8 inch coupling H35
111 991-8106 1/4 inch adapter H36
112 991-8107 1/8 inch adapter H37
113 991-8108 1/4 inch branch tee H38
114 991-8109 1/8 inch branch tee H39
115 991-8110 1/8 inch tee H40
116 991-8111 7/16 inch stainless steel hose clamp H41
117 997-2002 Hose clamp #6
118 991-8113 Strainer for 1/8 inch vee jets H43
119 991-8114 Strainer for 1/4 inch vee jets H44
120 991-8115 Strainer/check valve for 1/4 inch vee jets H45
121 991-8116 Brass strainer/check valve for tee jets H46
122 991-8117 500 PSI ball valve 1/4 inch fpt x 1/4 inch fpt H47
123 991-8118 500 PSI ball valve 3/8 inch fpt x 3/8 inch fpt H48
124 991-8119 500 PSI ball valve 1/4 inch mpt x 3/8 inch fpt H49
125 991-8120 1/4 inch brass flood jets K1 or K2 H54
126 991-8158 1/4 inch BH2-60 female coupler (mate to QD40)
127 991-8150 1/4 inch BH2-61 male nipple (mate to QD80)
128 991-8144 B2C, 1/4 inch mpt, male nipple, mate to QD50 or QD55        
129 991-8152 B12, 1/4 inch mpt, female coupler, mate to QD10 or QD15     
130 991-8145 B3C, 1/4 inch fpt, male nipple, mate to QD50 or QD55        
131 991-8153 B13, 1/4 inch fpt, female coupler, mate to QD10 or QD15     
132 991-8146 BH2C, 1/4 inch, mpt male nipple, mate to QD60 or QD65       
133 991-8154 B22, 1/4 inch mpt, female coupler, mate to QD20 or QD25
134 991-8147 BH3C, 1/4 inch fpt, male nipple, mate to QD60 or QD65       
135 991-8155 B23, 1/4 inch fpt, female coupler, mate to QD20 or QD25     
136 991-8148 Hansen 02 male nipple, mate to QD70
137 991-8156 Quick disconnect socket female to QD30
138 991-8149 1/8 inch male quick disconnect
139 991-8157 1/8 inch female quick disconnect socket
140 991-8151 BH3-61,3/8 inch FPT, Male Nipple, mate to QD85              
141 991-8159 BH3-60, 3/8 inch fpt, female coupler, mate to QD45          
142 991-8123 Bottom hex nut for Kingston or P valve H57
143 991-8121 1/8 inch brass flood jets K1 or K2 H55
144 991-8124 Inline filter H58
145 991-8122 1/8 inch special brass flood jets for V1245 H56
146 991-8008 120V 50 PSI Flo Jet pump (pumps)
147 991-8009 120V 100 PSI Flo Jet pump (pumps)
148 991-8218 120V 120 PSI pump (pumps)
149 991-8220 1/8 fpt brass female connector
150 991-1835 Crevice tool

- Frequently Replaced Parts

#PartDescription ReqNotesAvailability
02 162-5060 24V 20amp battery charger with small SB50 red plug
03 991-9284 50amp charger plug SB50 with pins (red)
04 998-0010 Battery jumper cable - ring type (red)
05 175-4287 Key switch assembly (OBSOLETE) (power)
06 175-4822 Rocker switch (vaccum)
07 175-8630 Brush pressure switch (brush)
08 175-8872 24V solenoid valve (before SN 10314331)
09 175-2023 24V solenoid contactor (after SN 10314332)
10 175-1819 Manual valve assembly
11 175-4224 Tank lid and decal assembly
12 175-4226 Tank lid gasket
13a 175-4214 Drain plug assembly
13b 991-3028 Drain plug assembly
14a 175-1153 Drain hose assembly (OEM)
14b 991-5126 Drain hose assembly (NON-OEM)
15 175-4361 24V 3 stage vacuum motor (OEM)
16 991-1230 24V 3 stage vacuum motor tangential with snout (NON-OEM)
17 175-4245 24V 3 stage vacuum motor (OEM)
18 991-1210 24V 3 stage vacuum motor tangential (NON-OEM)
19 175-4191 24V 100PSI solution pump
19b 991-6047 24V pump 100PSI (NON-OEM)
20 275-4735 Drive belt
21 175-8779 Scrub brush
22 175-1804 Shut-off float
23 175-6330 Spray nozzle
24 175-4310 Solution filter bowl assembly
01 162-0003 6V 225Ah wet battery (SNSR) 4
01 162-0043 6V 224Ah AGM battery (Group GC2) (SNSR) 4

Brush Motor Assembly

#PartDescription ReqNotesAvailability
1 275-4735 Drive belt 2 (after SN 10343029)
2 275-4737 Sheave 2 (after SN 10343029)
3 175-8818 Square keyway 2
4 999-0497 Nut M6-1 nylon insert lock stainless steel 8
5 999-1041 Screw M6-1 x 12mm pan head phillips stainless steel 8
6 175-8819 Drive plug 2
7 275-4736 Screw M8-1.25 x 20mm hex washer head stainless steel SEMS 4
8 275-1489 KEY, SQ, 0.19 X 0.19, 0.50L (Tennant Industrial) 2 (after SN 10343029)
9 275-1492 Drive shaft 2 (after SN 10343029)
10 175-2471 Ball bearing 4
11 175-8820 Spacer 2
12 175-8821 Bearing housing 2
13 275-9683 Screw M8-1.25 x 210mm hex head 2
14 999-0496 Nut M8-1.25 nylon insert lock stainless steel 2
15a 275-7482 Brush motor 2 (includes 15b, 16) (after SN 10409691)
15b 275-5306 Carbon brush (pkg of 4) 1 (after SN 10409691)
15c 175-8674 Carbon brush (pkg of 4) 1 (before SN 10409692)
16 175-4202 Square keyway 1
17 275-4738 Sheave 2 (after SN 1033029)`
18 999-0431 Screw 8-32 x 1/4 set socket cup point alloy plain finish 4
19 999-0024 Washer 5/16 flat stainless steel 4
20 175-8677 Brush motor harness 2
21 999-1053 Washer 5/16 internal star lock stainless steel 4
22 999-1424 Nut M8-1.25 hex stainless steel 4
23 175-8682 Terminal boot (black) 2
24 175-8681 Terminal boot (red) (OBSOLETE) 2
25a 175-2475 Idler plug assembly 2 (includes 25b-28)
25b 175-2478 Brush idler plug 1
26 175-2472 Retaining ring 1
27 175-2476 Idler plug shaft 1
28 175-2477 Roll pin 1
29 175-8824 Roller door 2
30 999-0120 Washer 3/8 SAE flat 2
31 175-4494 Washer M10 2
32 175-2947 Bolt M10 x 1-1/2 x 16 hex head stainless steel 2
33 175-8825 Housing weldment 1
34 175-8826 Spacer 4
35 175-8827 Foam gasket 2
36 175-4292 Console gasket 2
37 175-8828 Belt cover 2
38 999-0016 Washer 1/4 flat plain finish 4
39 999-1383 Screw M6-1 x 16mm hex head stainless steel 8
40 275-6250 Belt kit (includes belts, square keyways and hardware) 2
42 175-8816 Belt 2 (before SN 10343030)
43 999-0335 Washer 1/4 x 5/8 SAE flat stainless steel 2 (before SN 10343030)
44 175-4544 Washer M6 locking 2 (before SN 10343030)
45 999-0507 Bolt M6-1 x 16mm hex head full thread plain finish 2 (before SN 10343030)
46 999-0355 Washer 3/8 x 7/8 SAE flat stainless steel 2

Bumper Assembly

#PartDescription ReqNotesAvailability
0 175-8863 Bumper assembly 1 (includes 1-19)
1 175-8864 Bracket 1
2 999-1517 Screw M5-.8 x 12mm truss head stainless steel 2
3 175-4814 Brass strainer fitting 2
4 175-2997 Elbow 2
5 175-6032 Hose clamp 4
6 175-8865 Hose 3/4 x 4 inch 4 inch
7 175-2613 Straight brass fitting 2
8 175-6253 1/4 inch brass tee 1
9 175-8865 Hose 3/4 x 4 inch 4 inch
10 175-2997 Elbow 1
11 999-9092 Screw M8-1.25 x 20mm hex head stainless steel 2
12 175-4192 Quick jet body 2
13 175-8866 Hinge 1
14 175-8867 SCREW, HEX, M6 X 1.00 X 12, SS (Tennant Industrial) 2
15 275-5072 Bumper 1
16 175-6431 Quick-jet cap 2
17 175-8869 Brass fitting tip 2
18 175-4193 Quick jet gasket 2
19 175-4204 Check valve filter screen 2
20a 275-5074 Hose 3/8 x 75 inch 72 inch (after SN 10314331)
20b 175-8870 Hose 3/8 x 62 inch 61 inch (before SN 10314332)
21 175-8767 P clamp 1
22 175-3689 Screw M5-.8 x 12mm truss head phillips stainless steel 1
23 175-6081 Hose clamp 1

Carpet Rake Assembly

#PartDescription ReqNotesAvailability
0 475-2826 CARPET RAKE KIT 1 (includes 1-41)
1 175-5879 Squeegee lever knob (OBSOLETE) 1
2 175-8730 Squeegee lever 1
3 999-0499 Bolt M8-1.25 x 20mm hex head full thread stainless steel 3
4 999-0406 Washer 5/16 internal star lock zinc plated 3
5 999-0024 Washer 5/16 flat stainless steel 3
6 999-0471 Nut M8-1.25 nylon insert lock zinc plated 1
7 175-8731 Squeegee lever bracket 1
8 175-5070 Sleeved bearing 1
9 999-0617 Washer 3/8 x 1 flat stainless steel 1
10 999-0785 Screw M8-1.25 x 30mm hex head stainless steel 1
11 999-1201 Nut 1/4-28 nylon insert lock hex stainless steel 1
12 175-8732 Ball joint 1
13 999-0718 Nut 1/4-28 hex jam zinc plated 1
14 475-1908 CABLE, LIFT, SQGE 1
15 175-8734 Squeegee lever spring 1
16 175-8735 Cable bushing 1
17 475-0990 BRACKET, CABLE GUIDE 1
18 175-9822 Screw M6 x 1 x 40 phillip truss 3
19 999-0016 Washer 1/4 flat plain finish 3
20 175-3157 Sleeve .318 x .437 x 1.06 inch 3
21 175-3008 Retaining ring 1
22 175-8737 Adjusment yoke 1
23 175-3272 Cotter pin 1
24 175-8738 Clevis pin 1
25 999-1084 Screw M6-1 x 16mm truss head slotted stainless steel 2
26 175-4544 Washer M6 locking 2
27 999-0016 Washer 1/4 flat plain finish 2
28 475-1040 BRACKET, CABLE, SQGE LIFT 1
29 999-0561 Bolt 1/2-13 x 1 hex head stainless steel 2
30 999-0126 Washer 1/2 split lock 2
31 999-0559 Washer 1/2 x 1/4 flat stainless steel 4
32 175-2743 Sleeved bushing 2
33 475-2236 RAKE, CARPET, COMBO 1
34 999-0152 Nut 1/4-20 nylon insert lock zinc plated 4
35 475-1651 BRACKET, RAKE, PIVOT 1
36 475-1966 PIVOT WLDT, LIFT, RAKE 1
37 175-2199 Compression spring 1
38 175-1825 Washer 2
39 475-1597 BRACKET, MOUNT, RAKE 1
40 475-1795 PIN, CLEVIS, 0.50D X 6.75L 1
41 175-4331 Cotter hair pin 1

Control Console Assembly

#PartDescription ReqNotesAvailability
1 175-4260 Torsion spring 1
2 175-4253 Handle bar 1
3a 175-4263 Console (teal) (OBSOLETE) 1
3b 275-5058 Console (gray) 1
4 175-4259 Potentiometer console bracket 1 (includes 5a, 6-13)
5a 475-0806 BUSHING, GRIP, THROTTLE [1610] 3 (after SN 10810182)
5b 175-3093 Flanged bushing 3 (between SN 10321169 and SN 10810182)
6 275-5060 Cam switch plate 1 (after SN 10321168)
7 275-5061 Hub assembly with gear 1 (after SN 10321168)
8 999-1308 Nut M6-1 hex stainless steel 1
9 275-5062 Screw M6-1 x 35mm hex head 1 (after SN 10321168)
10 675-9894 Handle grip 2
11 275-5063 Potentiometer bracket 1 (after SN 10321168)
12 999-0521 Screw M4-.7 x 12mm pan head phillips zinc 4
13 999-0201 Washer 3/8 internal star lock 2
14 175-4256 Compression spring 1
15 175-4254 Adjustment lever 1
16 175-4261 Potentiometer and wiring assembly 1
17 275-5064 Toothed gear 1
18 999-1166 Bolt M3-.5 x 40mm hex head stainless steel 2
19 175-1202 Flat washer 4
20 175-4273 Switch 3
21 999-1161 Nut M3-.5 hex nylock stainless steel 2
22 999-1084 Screw M6-1 x 16mm truss head slotted stainless steel 2
23 175-4277 Wiring harness retainer 1
24 175-4255 Flanged bushing 2
25 175-7795 Cable tie 4
26a 175-8796 24V main wiring harness 1 (after SN 10243220) (includes 27-28)
26b 175-8797 24V main wiring harness 1 (before SN 10243221) (includes 27-28)
27 175-8635 40amp relay 3
28 375-0043 35amp fuse 2
29 999-0566 Washer 1/2 flat nylon 8
30 175-4269 Bearing 2
31 275-4736 Screw M8-1.25 x 20mm hex washer head stainless steel SEMS 4
32 175-4278 Cap 1
33 999-0024 Washer 5/16 flat stainless steel 4
34 175-4272 Sliding plate 1
35 175-4271 Screw M8 x 35mm set 4
36 999-0471 Nut M8-1.25 nylon insert lock zinc plated 4
37 175-4250 Retainer plate 1
38 175-4251 Screw M4 x 8mm flat head phillips 2
39 175-4270 Bearing 2
40 175-4252 Retaining ring 1

Control Panel Assembly

#PartDescription ReqNotesAvailability
1 175-8800 Brush pressure gauge 1
2 175-8630 Brush pressure switch 1
3 175-4822 Rocker switch 1
4 175-2849 Indicator light 1
5 175-3728 24V battery gauge with screw 1
6 175-4281 Potentiometer knob 1
7 175-8801 Main dash decal 1
8a 175-8803 Console panel (OBSOLETE) 1 (before SN 10243221)
8b 175-8802 Console panel 1 (after SN 10243220)
9 175-4898 Spacer 4 (before SN 10988798)
10a 175-3124 Retrofit kit circuit board replacement 4 (before SN 10988798)
10b 375-2527 Propel controller 1 (after SN 10988797)
11 999-0521 Screw M4-.7 x 12mm pan head phillips zinc 4
12 175-7699 Switch boot 2
13a 175-4287 Key switch assembly (OBSOLETE) 1 (includes 014)
13b 775-0110 Retrofit kit, Panel key switch (1610)
14 175-0185 Double sided key (steel) 1
15 175-8804 Console panel decal 1 (after SN 10243220)
16 175-8805 Circuit breaker decal (OBSOLETE) 1 (before SN 10243221)
17 175-4288 Key switch decal 1 (before SN 10243221)
18 175-4293 24V relay 1
19 175-2757 Diode with ring terminals (small) 1
20 999-0497 Nut M6-1 nylon insert lock stainless steel 2
21 175-4292 Console gasket 2
22 175-8806 20amp relay 1
23 175-4290 Nut M4 x .70mm hex 3
24 175-6630 17amp circuit breaker 2
25 175-4295 Terminal diode 1
26 175-2337 20amp circuit breaker 1
27 175-2336 10amp circuit breaker 1
28 275-5067 Relay interrupter 1
29 175-8767 P clamp 1
30 175-4285 Potentiometer 1
31 175-5815 Screw 10 x 1/2 pan head phillips black 4
32 175-3098 Lighted on/off rocker switch 1
33 175-4291 Console gasket 2
34 999-1084 Screw M6-1 x 16mm truss head slotted stainless steel 2
35 175-4264 Bracket 1
36 175-8799 Dual timer module 1
37 999-0954 Nut M4-.7 nylon insert lock stainless steel 1
38 999-1518 Screw M4-.7 x 30mm pan head phillips zinc plated 1
39 999-1254 Washer 3/8 SAE flat zinc plated 1
40 175-3107 Screw M4-.7 x 35mm flat head phillips 2
41 999-0954 Nut M4-.7 nylon insert lock stainless steel 4
42 175-3101 Heat sink 1
43 375-7852 Propel adapter harness 2

Hand Tool Assembly - 3 inch

#PartDescription ReqNotesAvailability
000 175-4827 3 inch crevice tool assembly 1 (Includes 001-007)
001 175-4828 3 inch crevice tool 1
002 175-4829 Brass v-jet fitting 1
003 175-1939 Ball valve 1
004 175-4830 Valve handle 1
005 175-4831 Solution hose 1
006 175-4832 Straight fitting 1
007 991-8158 1/4 inch BH2-60 female coupler (mate to QD40) 1

Hand Tool Assembly - 5 inch

#PartDescription ReqNotesAvailability
0 175-3567 5 inch hand tool assembly 1 (Includes 1-12)
1 175-3568 5 inch hand tool 1
2 991-8158 1/4 inch BH2-60 female coupler (mate to QD40) 1
3 175-6239 1/4 inch nipple 2
4 175-3569 Hand tool trigger 1
5 175-3570 Valve 1
7 175-4841 Roll pin 1
8 175-6031 Straight jet fitting 1
9 175-3572 Spray body 1
10 175-1802 Mesh screen filter 1
11 175-3573 Spray tip 1
12 175-1834 Spray nozzle cap 1

Low Pressure Upholstery Tool Assembly

#PartDescription ReqNotesAvailability
000 175-4855 Low pressure upholstery tool assembly 1 (includes 001-014)
001 175-4856 Upholstery tool cover 1
002 175-4857 Gasket 1
003 175-4858 Valve assembly 1
004 175-4859 Solution valve 1
005 175-4860 Nozzle 1
006 175-4861 Screw 6-32 x 3/4 inch 4
007 175-4862 Trigger 1
008 175-4863 Vacuum hose without cuffs 1
009 175-4864 Solution hose 1
010 175-4865 Fitting 1
011 175-4866 Inline filter assembly 1
012 175-4867 Filter screen 1
013 175-6239 1/4 inch nipple 1
014 991-8158 1/4 inch BH2-60 female coupler (mate to QD40) 1

Low Pressure Wand Assembly

#PartDescription ReqNotesAvailability
0a 775-0395 13 inch low pressure wand assembly 1 (Includes 1a, 2-3a, 4-19b, 20-26)
0b 175-4314 16 inch low pressure wand assembly 1 (Includes 1b-2, 3b-18, 19c-26)
1a 175-1810 13 inch floor tool 1
1b 175-4299 16 inch floor tool 1
2 175-3564 Low pressure tool decal 1
3a 175-1321 13 inch pick-up shoe plate stainless steel 2
3b 175-6146 16 inch pick-up shoe plate stainless steel 2
4 175-1812 Handle assembly (OBSOLETE) 1 (Includes 5-7)
5 999-0633 Bolt 1/4-20 x 5/8 hex head stainless steel 2
6 175-1813 Foam grip 1
7 999-0990 Screw 1/4-20 x 5/8 flat head phillips stainless steel 2
8 175-1816 Handle sleeve 1
9 175-1815 Trigger 1
10 175-1817 Handle pin 1
11 175-1818 Nut 1/4 push 2
12 175-6031 Straight jet fitting 1
13 991-8158 1/4 inch BH2-60 female coupler (mate to QD40) 1
14 175-1819 Manual valve assembly 1 (includes 15)
15 175-1820 Valve pin and spring kit 1
16 175-3565 Solution hose assembly 1
17 175-6239 1/4 inch nipple 1
18 175-1825 Washer 1
19a 175-1826 Spray bar without tips for 13 inch wand 1 (includes 19b, 20-22)
19b 175-1829 Tee fitting 1
19c 175-4313 Spray bar without tips for 16 inch wand 1 (includes 19d-22)
19d 175-6253 1/4 inch brass tee 1
19e 175-6029 Straight tee 2
20 175-6015 Nipple 2
21 175-6248 90 degree elbow 2
22 175-1830 1/4 inch male spray body 3 (qty 4 for 16 inch)
23 175-1802 Mesh screen filter 3 (qty 4 for 16 inch)
24 175-3566 T-jet tip fitting 3 (qty 4 for 16 inch)
25 175-1834 Spray nozzle cap 3 (qty 4 for 16 inch)
26 175-6244 Nipple 1

Manual Battery Watering Assembly

#PartDescription ReqNotesAvailability
0 375-9382 Manual battery fill kit 1 (includes 1-4)
1 375-9383 Battery hand pump 1
2 375-9384 Battery water distribution kit (OBSOLETE) 1
3 375-9385 Battery tag decal 1
4 175-7795 Cable tie 2

Recovery Tank Assembly

#PartDescription ReqNotesAvailability
1 175-4224 Tank lid and decal assembly 1 (includes 2 and 3)
2 175-2868 Warning decal 1
3 175-4226 Tank lid gasket 1
4 175-1803 Tank lid hinge 1
5 999-0434 Screw 6 x 3/8 pan head phillips 4
6 175-5797 Washer 1/6 flat zinc 4
7 175-4228 2 inch plug 1
8 175-4231 Float mount gasket 1
9 175-4232 Float cage mount 1
10 999-1084 Screw M6-1 x 16mm truss head slotted stainless steel 2
11 175-1804 Shut-off float 1
12a 175-4227 Recovery tank (teal) 1
12b 275-5055 Recovery tank (gray) 1
13 175-4233 Hose adaptor 1
14 175-4234 Washer M5.3 flat 2
15 999-9132 Washer M5 split lock stainless steel 2
16 175-3234 Screw M5-.8 x 10mm pan head 2
17a 175-1153 Drain hose assembly 1 (includes 18-20) (OEM)
17b 991-5126 Drain hose assembly 1 (NON-OEM)
18a 175-4214 Drain plug assembly 1 (includes 19-20) (OEM)
18b 991-3028 Drain plug assembly 1 (NON-OEM)
19 N/A Not available 1 (drain cap strap) (only available with 18)
20 175-5804 O-ring 1
21 997-2000 Hose clamp 1
22 275-5057 1610 decal 2
23 175-8788 Battery diagram decal 1
24 175-2673 Bushing 1
25 999-0123 Washer 1/4 SAE flat zinc plated 2
26 175-4236 Stop bracket 1
27 175-4241 Tank support 1
28 175-7780 Rubber bumper 1
29 999-0501 Bolt M8-1.25 x 25mm hex head full thread stainless steel 1
30 175-4237 Tennant decal 1
31 999-0553 Washer 5/16 medium split lock stainless steel 1

Roller and Brush Assembly

#PartDescription ReqNotesAvailability
001 175-9045 Soil transfer roller assembly 2
002 175-8779 Scrub brush 2

Scrub Head Assembly

#PartDescription ReqNotesAvailability
1 175-4814 Brass strainer fitting 2
2 175-2997 Elbow 2
3 175-6032 Hose clamp 5
4 175-8829 Hose 3/8 x 2 1/2 inch 24 inch
5 175-1615 Tee fitting 1
6a 275-3863 Hose 3/8 x 40 inch (gray) 40 inch (after SN 10314331)
6b 175-1978 Hose 3/8 x 24 inch 24 inch (before SN 10314332)
7 175-8830 Hose 3/8 x 7 inch (gray) 6 inch
8 999-1520 Screw M3-.5 x 30mm pan head phillips zinc plated 2
9 999-1158 Washer #6 flat stainless steel 4
10 175-4273 Switch 2
11 999-1161 Nut M3-.5 hex nylock stainless steel 2
12 999-0954 Nut M4-.7 nylon insert lock stainless steel 6
13 175-8831 Latch 3
14 175-8832 Keeper clip 2
15 999-0521 Screw M4-.7 x 12mm pan head phillips zinc 6
16 175-8825 Housing weldment 1
17 175-8833 Splash shroud 2
18 175-4194 Quick jet cap (green) 2
19 175-6330 Spray nozzle 2
20 175-4193 Quick jet gasket 2
21 175-4192 Quick jet body 2
22 999-1424 Nut M8-1.25 hex stainless steel 2
23 999-1692 Screw M8-1.25 x 50mm hex stainless steel 2

Scrub Head Lift Assembly

#PartDescription ReqNotesAvailability
1 175-2757 Diode with ring terminals (small) 1
2 999-0469 Nut M6-1 nylon insert lock zinc plated 2
3 999-0123 Washer 1/4 SAE flat zinc plated 2
4 175-2023 24V solenoid contactor 1
5 275-4736 Screw M8-1.25 x 20mm hex washer head stainless steel SEMS 4
6 175-8814 Actuator 1
7 175-2111 Clevis pin 1
8 999-0181 Nut 1/4-20 hex jam plain finish 1
9 999-0632 Washer 1/4 split lock stainless steel 1
10 175-3227 Threaded rod 1
11 175-3226 Insulated stand off 1
12 175-4352 Contactor bracket 1
13 175-8644 Actuator mounting bracket 1
14 175-4351 General hazard decal 1
15 175-8815 Bracket 1
16 175-4357 Bracket 1
17 999-0355 Washer 3/8 x 7/8 SAE flat stainless steel 1
18 275-4736 Screw M8-1.25 x 20mm hex washer head stainless steel SEMS 5
19 999-9082 Screw M8-1.25 x 25mm hex head stainless steel 3
20 999-0471 Nut M8-1.25 nylon insert lock zinc plated 1
21 175-3005 P clamp 2
22 175-8812 Bolt 1/2 x 3 1/4 shield 1
23 175-4371 Compression spring 2
24 175-4358 Washer 1 1/2 thrust 2
25 175-4359 Linkage roller 1
26 999-0032 Washer 3/8 USS flat plain finish 1
27 999-0513 Nut 3/8-16 nylon insert lock type NE stainless steel 1
28 175-4013 Bracket 1
29 175-8813 Vacuum motor bracket 1
30 999-9079 Screw M8 x 80mm hex head stainless steel 2
31 175-4343 1 inch tube 2
32 999-0024 Washer 5/16 flat stainless steel 2
33 999-0471 Nut M8-1.25 nylon insert lock zinc plated 2
34 175-2102 Scrub head lifting arm 2
35 175-2106 Cotter hair pin 2
36 175-2105 Clevis pin 2
37 175-9603 Clevis pin 1
38 175-4331 Cotter hair pin 2

Solution and Vacuum Hose Assembly

#PartDescription ReqNotesAvailability
1a 775-0278 15 foot solution hose assembly 1 (includes 2-4)
1b 175-3587 25 foot solution hose assembly 1 (includes 2-4)
1c 175-3588 50 foot solution hose assembly 1 (includes 2-4)
1d 991-8143 20ft 100psi vac/sol hose assembly w/1/4 female & 1/4 male 1 (NON-OEM)
2 991-8158 1/4 inch BH2-60 female coupler (mate to QD40) 1
3 991-8150 1/4 inch BH2-61 male nipple (mate to QD80) 1
4 175-6244 Nipple 2
5a 175-3589 15 foot vacuum hose assembly 1 (includes 6)
5b 175-3590 25 foot vacuum hose assembly 1 (includes 6)
5c 175-3591 50 foot vacuum hose assembly 1 (includes 6)
6 175-6269 1 1/2 inch hose cuff (OBSOLETE) 2
7 175-8758 Connector 1
N/S 175-2646 Hose bag with draw string 1

Solution Assembly - After SN 10314331

#PartDescription ReqNotesAvailability
1 175-0887 Vacuum hose 1 1/2 x 33 inch 2
2 275-5075 Vacuum hose bracket 1
3 999-1084 Screw M6-1 x 16mm truss head slotted stainless steel 3
4 999-0187 Washer 1/2 flat plain finish 2
5 991-8150 1/4 inch BH2-61 male nipple (mate to QD80) 1
6 999-0371 Screw 10-32 x 1/2 pan head phillips zinc plated 2
7 999-9132 Washer M5 split lock stainless steel 2
8 999-0393 Washer 3/16 flat aluminum 2
9 175-2997 Elbow 1
10 175-3061 Hosebarb 1
11 175-4307 Hosebarb 1
12 175-6170 Hose clamp 1
13 175-6032 Hose clamp 2
14 275-5071 Hose 1/4 x 1/2 x 33 inches (gray) 33 inch
15 275-5074 Hose 3/8 x 75 inch 72 inch
16 275-3863 Hose 3/8 x 40 inch (gray) 41 inch
17 175-6081 Hose clamp 1
18 175-8699 Hose 1/2 x 20 inch 18 inch
19 175-5226 Brass fitting 1
20 275-5076 24V 3 station solenoid valve 1 (includes 21-25)
21 275-5077 Manifold block 1
22 275-5078 24V series 3 solenoid valve 1 (includes 23)
23 275-5079 Solenoid seal 1
24 275-5080 24V series 6 solenoid valve 2 (includes 25)
25 275-5081 Solenoid seal 2
26 175-0199 Hose clamp 1
27 175-6030 Straight hosebarb 1
28 175-6031 Straight jet fitting 1
29 175-8875 Pipe plug 1
30 175-8694 Brass fitting 1
31 175-3671 Hose clamp 4
32 275-5082 20 inch hose 21 inch
33 175-2842 Check valve 1
34 175-8662 Hose 3/8 x 7 3/4 inch 5 inch
35 175-6019 90 degree barbed elbow 1
40 175-8699 Hose 1/2 x 20 inch 18 inch
41 175-6081 Hose clamp 3
42 175-3692 Tee fitting 2
43 175-0199 Hose clamp 1
44 175-4298 11 inch hose (red) 10 inch
45 175-4191 24V 100PSI solution pump 1 (includes 46a-50)
45b 991-6047 24V pump 100PSI (NON-OEM)
46a 175-6003 Pressure switch kit 1
46b 175-6004 Viton pressure switch kit 1
46c 175-6005 Shurflo diaphragm switch kit 1
47a 175-6006 Upper pump housing kit 1
47b 175-6007 Check valve kit 1
48 175-6008 Viton valve kit 1
49 175-6009 Shurflo valve kit 1
50 175-6010 Lower pump housing kit 1
51 999-0006 Washer 3/16 flat zinc plated 2
52 999-0442 Nut 10-24 nylon insert lock stainless steel 2
53 175-3685 90 degree elbow fitting 1
54 175-8684 15 inch reinforced hose 12 inch
55 175-1025 Straight brass fitting 1
56 999-0393 Washer 3/16 flat aluminum 4
57 999-9132 Washer M5 split lock stainless steel 4
58 999-1225 Screw M5-.8 x 12mm pan head phillips zinc 4
59 175-3690 U clamp 2
60 175-4310 Solution filter bowl assembly 1 (includes 61)
61 175-6250 Strainer 1
62 175-4311 Mesh filter screen 1
63 175-4303 Inline filter with mesh screen 2
64 375-0291 Hose clamp 4
65 175-8873 Hose 1/2 x 3/4 inch 4 inch
66 175-8874 Hose 1/2 x 3/4 inch 9 inch

Solution Assembly - Before SN 10314332

#PartDescription ReqNotesAvailability
1 999-1165 Screw 8-32 x 3/8 truss head phillips stainless steel 2
2 999-0024 Washer 5/16 flat stainless steel 1
3 999-1053 Washer 5/16 internal star lock stainless steel 1
4 999-0499 Bolt M8-1.25 x 20mm hex head full thread stainless steel 1
5 175-7302 Hose 1/4 x 1/2 x 8 inches (gray) 8 inch
6 175-6170 Hose clamp 1
7 175-6024 Hosebarb 1
8 175-8776 Bracket (OBSOLETE) 1
9 175-4308 24V solenoid valve 1
10 175-2613 Straight brass fitting 3
11 175-6032 Hose clamp 6
12 175-8871 Hose 3/8 x 8 inch 8 inch
13 175-0199 Hose clamp 4
14 175-4298 11 inch hose (red) 8 inch
15 175-6030 Straight hosebarb 2
16 175-8871 Hose 3/8 x 8 inch 7 inch
17 175-1829 Tee fitting 1
18 175-2997 Elbow 3
19 175-6244 Nipple 1
20 175-2614 90 degree elbow fitting 1
21 175-8872 24V solenoid valve 2
22 999-1026 Washer #10 internal lock stainless steel 4
23 999-0726 Screw 10-32 x 5/8 pan head phillips zinc plated 4
24 175-8870 Hose 3/8 x 62 inch 61 inch
25 175-0887 Vacuum hose 1 1/2 x 33 inch 2
26 175-4302 Bracket 1
27 999-1084 Screw M6-1 x 16mm truss head slotted stainless steel 3
28 991-8150 1/4 inch BH2-61 male nipple (mate to QD80) 1
29 999-0187 Washer 1/2 flat plain finish 2
30 175-6031 Straight jet fitting 1
31 175-4298 11 inch hose (red) 10 inch
32 175-6019 90 degree barbed elbow 1
33 175-3671 Hose clamp 4
34 175-8662 Hose 3/8 x 7 3/4 inch 8 inch
35 175-2842 Check valve 1
36 175-8662 Hose 3/8 x 7 3/4 inch 8 inch
37 175-8694 Brass fitting 1
38 175-8875 Pipe plug 1
39 175-1978 Hose 3/8 x 24 inch 24 inch
40 175-6029 Straight tee 1
41 175-8876 Static chain 1
46 175-4298 11 inch hose (red) 8 inch
47 175-0199 Hose clamp 4
48 175-3692 Tee fitting 2
49 175-4298 11 inch hose (red) 10 inch
50 175-4191 24V 100PSI solution pump 1 (includes 51a-55)
50b 991-6047 24V pump 100PSI (NON-OEM)
51a 175-6003 Pressure switch kit 1
51b 175-6004 Viton pressure switch kit 1
51c 175-6005 Shurflo diaphragm switch kit 1
52a 175-6006 Upper pump housing kit 1
52b 175-6007 Check valve kit 1
53 175-6008 Viton valve kit 1
54 175-6009 Shurflo valve kit 1
55 175-6010 Lower pump housing kit 1
56 999-0006 Washer 3/16 flat zinc plated 2
57 999-0442 Nut 10-24 nylon insert lock stainless steel 2
58 175-3685 90 degree elbow fitting 1
59 175-6081 Hose clamp 2
60 175-8684 15 inch reinforced hose 12 inch
61 175-1025 Straight brass fitting 1
62 999-0393 Washer 3/16 flat aluminum 4
63 999-9132 Washer M5 split lock stainless steel 4
64 999-1225 Screw M5-.8 x 12mm pan head phillips zinc 4
65 175-3690 U clamp 2
66 175-4310 Solution filter bowl assembly 1 (includes 67)
67 175-6250 Strainer 1
68 175-4311 Mesh filter screen 1
69 175-4303 Inline filter with mesh screen 2
70 375-0291 Hose clamp 4
71 175-8873 Hose 1/2 x 3/4 inch 4 inch
72 175-8874 Hose 1/2 x 3/4 inch 9 inch

Solution Flow Diagram - After SN 10314332

#PartDescription ReqNotesAvailability
001 175-2842 Check valve
002 175-4310 Solution filter bowl assembly
003 175-4191 24V 100PSI solution pump
003b 991-6047 24V pump 100PSI (NON-OEM)
004 175-4303 Inline filter with mesh screen
005 275-5078 24V series 3 solenoid valve
006 275-5080 24V series 6 solenoid valve
007 175-8836 Brass tip fitting
008 175-6431 Quick-jet cap
009 175-4194 Quick jet cap (green)
010 991-8150 1/4 inch BH2-61 male nipple (mate to QD80)

Solution Flow Diagram - Before SN 10314331

#PartDescription ReqNotesAvailability
001 175-2842 Check valve
002 175-8872 24V solenoid valve
003 175-4310 Solution filter bowl assembly
004 175-4191 24V 100PSI solution pump
004b 991-6047 24V pump 100PSI (NON-OEM)
005 175-4303 Inline filter with mesh screen
006 175-8872 24V solenoid valve
007a 175-4308 24V solenoid valve 1 (if solenoid valve is leaking try replacing the plunger with spring first before replacing entire solenoid valve)
007b 991-8598 Replacement plunger with spring for solenoid valve 1
008 175-8836 Brass tip fitting
009 175-6431 Quick-jet cap
010 175-4194 Quick jet cap (green)

Solution Switch Assembly

#PartDescription ReqNotesAvailability
001 175-8880 Console panel 1
002 175-0136 On/off rocker switch 1
N/S 175-8881 Wire assembly (white) 1
N/S 175-8882 Wire assembly (brown) 1

Solution Tank Assembly

#PartDescription ReqNotesAvailability
1 N/A Not available 1 (filter screen) (only available with 22)
2 999-1158 Washer #6 flat stainless steel 2 (before SN 10514502)
3 999-1111 Screw 6-32 x 3/4 pan head phillips sheet metal 2
4 N/A Not available 1 (cover gasket) (only available with 22)
5 N/A Not available 1 (solution fill cover) (only available with 22)
6 175-9035 Knob 1 (before SN 10514502)
7 175-5129 Ball chain #10 stainless steel 1 (before SN 10514502)
8 999-1026 Washer #10 internal lock stainless steel 1
9 999-1111 Screw 6-32 x 3/4 pan head phillips sheet metal 1
10 175-4223 P clamp 3
11 999-1084 Screw M6-1 x 16mm truss head slotted stainless steel 3
12 175-3718 Knob 5
13 175-8782 Scrub head shroud 1
14 175-4351 General hazard decal 1
15 997-2000 Hose clamp 1
16 999-1084 Screw M6-1 x 16mm truss head slotted stainless steel 9
17 175-4221 Tank hinge 1
18 999-1084 Screw M6-1 x 16mm truss head slotted stainless steel 2
19 175-8783 Wand decal 1
20 175-4215 Drain hose clip 2
21 175-2651 Support cable 1
22 175-4220 Solution fill screen assembly 1 (after SN 10514501)
23a 175-4213 Solution tank (teal) 1
23b 275-5052 Solution tank (gray) 1
24 175-3061 Hosebarb 1
25 175-3671 Hose clamp 1
26 175-4216 Sight gauge hose 1
27 175-2997 Elbow 1
28 175-7825 Solution fill port cap 1
29 999-0531 Screw M5-.8 x 16mm pan head slotted zinc 1
30 999-0998 Washer #10 flat stainless steel 1
31 999-1084 Screw M6-1 x 16mm truss head slotted stainless steel 2
32 175-1153 Drain hose assembly 1 (includes 33-34)
33 175-4214 Drain plug assembly 1
34 175-4214 Drain plug assembly 1
35 175-5804 O-ring 1
36 999-1158 Washer #6 flat stainless steel 2 (after SN 10514501)
37 275-5054 Notched insulation 1
38 275-5053 Pre-spray detergent 1 (optional)

Vacuum Motor Assembly

#PartDescription ReqNotesAvailability
1 675-9893 Vacuum motor gasket 1
2 175-4245 24V 3 stage vacuum motor 1 (includes 3)
3 175-2658 Carbon brush (pkg of 2) 1
4 175-2057 Hose clamp 1
5 175-4246 Vacuum hose with one cuff 1
6 997-2000 Hose clamp 1
7 175-4243 Spacer 3
8 999-0016 Washer 1/4 flat plain finish 6
9 999-0632 Washer 1/4 split lock stainless steel 3
10 999-1169 Bolt M6-1 x 100mm hex head full thread plain finish 3
11 999-0471 Nut M8-1.25 nylon insert lock zinc plated 2
12 999-0355 Washer 3/8 x 7/8 SAE flat stainless steel 2
13 175-4247 Bracket 1
14 175-2028 Gasket 1
15 175-8789 Vacuum mounting bracket 1
16a 999-1133 Bolt M8-1.25 x 20mm hex head full thread plain 2 (before SN 10339653)
16b 275-4736 Screw M8-1.25 x 20mm hex washer head stainless steel SEMS 2 (after SN 10339652)
17a 999-0507 Bolt M6-1 x 16mm hex head full thread plain finish 2 (before SN 10339653)
17b 999-1084 Screw M6-1 x 16mm truss head slotted stainless steel 2 (after SN 10339652)
18 175-3635 Transition tube 1
19 175-4353 Compression spring 1
20 175-8621 Plastic edging 1
21 999-0738 Screw M3-.5 x 16mm pan head phillips zinc 2
22 275-6915 Hourmeter gauge 1
23 999-0144 Nut 6-32 k-lock zinc plated 2
24 999-1084 Screw M6-1 x 16mm truss head slotted stainless steel 2
25 999-1521 Washer M3 flat stainless steel 2
26 999-1161 Nut M3-.5 hex nylock stainless steel 4
27 175-1202 Flat washer 4
28 175-4273 Switch 1
29 175-1333 Screw M3-.5 x 20mm hex head 2
30 999-0393 Washer 3/16 flat aluminum 2
31 999-1215 Washer #6 SAE flat zinc plated 2
32 999-0148 Washer #6 external star lock zinc plated 2
33 999-0511 Screw 6-32 x 1 pan head phillips zinc plated 2
34 991-9284 50amp charger plug SB50 with pins (red) 1
35 175-4355 Retaining ring 1
36 175-8811 Vacuum hose 1 1/2 x 6 inch 1
37 997-2000 Hose clamp 1
38 175-4243 Spacer 3
39a 999-0784 Screw M8-1.25 x 16mm hex head stainless steel 1 (before SN 10339653)
39b 999-9082 Screw M8-1.25 x 25mm hex head stainless steel 1 (after SN 10339652)
40 175-8813 Vacuum motor bracket 1
41 675-9893 Vacuum motor gasket 1
42 175-4361 24V 3 stage vacuum motor 1 (includes 43)
43 175-2658 Carbon brush (pkg of 2) 1
44 999-1169 Bolt M6-1 x 100mm hex head full thread plain finish 3
45 999-0632 Washer 1/4 split lock stainless steel 3
46 999-0016 Washer 1/4 flat plain finish 6

Vacuum Shoe Assembly - Extraction

#PartDescription ReqNotesAvailability
1 175-4334 Washer spherical 1
2 999-0024 Washer 5/16 flat stainless steel 1
3 999-0496 Nut M8-1.25 nylon insert lock stainless steel 1
4 275-4736 Screw M8-1.25 x 20mm hex washer head stainless steel SEMS 2
5 999-1424 Nut M8-1.25 hex stainless steel 1
6 999-0355 Washer 3/8 x 7/8 SAE flat stainless steel 1
7 175-8854 Scrub deck mounting bracket 1
8a 175-8855 Vacuum shoe assembly 1 (includes 8b-16)
8b 175-8856 Carpet pickup tool 1
9 175-8857 Carpet tool gasket 1
10 175-8858 Carpet tool plate 1
11 175-4398 Screw M5-.8 x 10mm phillips truss head zinc 6
12 175-8859 Compression spring 2
13 175-8860 Bolt M6 x 1 stainless steel 4
14 999-0802 Screw M8-1.25 x 16mm socket head 2
15 175-8861 Mounting bracket 1
16 175-8862 Gasket 1
17 175-8825 Housing weldment 1
18 999-1053 Washer 5/16 internal star lock stainless steel 1 (before SN 10314332)
19 175-8780 6mm hex head T-handle tool 1

Vacuum Shoe Assembly - ReadySpace

#PartDescription ReqNotesAvailability
1 175-8834 Right side hose assembly 1 (includes 2-11)
2 175-8835 O-ring seal 2
3 175-8836 Brass tip fitting 2
4 175-1661 90 degree elbow fitting 2
5 175-3529 Brass fitting 2
6 175-6170 Hose clamp 6
7 175-8837 Hose 1/4 x 8 inch (gray) 6 inch
8 175-7303 1/4 inch union tee 1
9 175-8838 Braided hose 1/4 x 1/2 x 4 inches (gray) 2 inch
10 175-8839 Strainer fitting 1
11 175-7364 16 inch hose (gray) 16 inch
12a 175-8840 Roller tool assembly 2 (includes 12b-21)
12b 175-8841 Roller vacuum tool 2
13 175-8842 Compression spring 4
14 175-8843 Vacuum tool cover mounting clip 4
15 175-8844 Roll pin 1/8 x 1 1/4 inch 4
16 175-8845 Nozzle retaining latch 4
17 175-8846 Timing key 4
18 175-8847 Latch retainer 4
19 999-0534 Screw M4-.7 x 10mm pan head slotted zinc 4
20 175-8848 Tool cover assembly 2
21 175-8849 Gasket 2
22 999-0802 Screw M8-1.25 x 16mm socket head 4
23 175-8850 Vacuum hose 1 1/2 x 11 3/4 inch 1
24 997-2000 Hose clamp 1
25 175-8851 Hose fitting assembly 1
26a 275-5071 Hose 1/4 x 1/2 x 33 inches (gray) 33 inch (after SN 10314331)
26b 175-7302 Hose 1/4 x 1/2 x 8 inches (gray) 8 inch (before SN 10314332)
27 175-6170 Hose clamp 5
28 175-7303 1/4 inch union tee 1
29 175-8852 Hose 1/4 x 1/2 x 10 inches (gray) 10 inch
30 175-4877 Hose 1/4 x 9 1/2 inch (gray) 7 inch
31 175-5311 Female fitting with valve 2
32 175-8853 Left side hose assembly 1 (includes 33-43)
33 175-8835 O-ring seal 2
34 175-8836 Brass tip fitting 2
35 175-1661 90 degree elbow fitting 2
36 175-3529 Brass fitting 2
37 175-6170 Hose clamp 6
38 175-4876 PVC hose 1/4 x 12 inch (gray) 11 inch
39 175-7303 1/4 inch union tee 1
40 175-8838 Braided hose 1/4 x 1/2 x 4 inches (gray) 2 inch
41 175-8839 Strainer fitting 1
42 175-8838 Braided hose 1/4 x 1/2 x 4 inches (gray) 2 inch
43 175-6041 Elbow 1/8 x 1/8 inch 1

Wheel Assembly

#PartDescription ReqNotesAvailability
1 999-9082 Screw M8-1.25 x 25mm hex head stainless steel 4 (after SN 10492842)
2 175-4343 1 inch tube 2
3 175-2102 Scrub head lifting arm 2
4 175-2991 4 inch caster wheel 2
5 175-8807 Caster tiedown bracket 2
6 175-8808 Transaxle frame 1
7 175-8876 Static chain 1 (after SN 10314331)
8 999-9113 Screw M4-.7 x 16mm pan head phillips stainless steel 1
9 275-4736 Screw M8-1.25 x 20mm hex washer head stainless steel SEMS 4
10 999-0152 Nut 1/4-20 nylon insert lock zinc plated 8
11 999-0016 Washer 1/4 flat plain finish 8
12a 175-3652 Foam filled wheel 2 (after SN 10492842)
12b 175-4347 Wheel 2 (before SN 10492843)
13 175-1097 Washer flat stainless steel 8
14a 475-2878 TRANSAXLE, 24VDC, 116RPM 1 (includes 14b-25) (after SN 10440492)
14b 175-3654 Transaxle body 1
15 175-3657 24V transaxle motor 1 (includes 16-22)
16 175-7898 Carbon brush (pkg of 4) 1
17 175-3655 Transaxle coupling 1
18 175-3656 Transaxle key 1
19 999-0458 Screw 8 x 1/2 pan head phillips T-A sheet metal zinc 2
20 N/A Not available 2 (shaft cover)
21 999-0238 Washer 1/4 internal star lock zinc plated 2
22 175-3663 Screw 1/4-20 x 5/8 socket 2
23 275-5229 Transaxle wheel hub with retainer 1
25 175-3660 Transaxle sleeve 2
26 999-1653 Screw M8-1.25 x 30mm hex head stainless steel 4 (after SN 10492842)
27 275-4736 Screw M8-1.25 x 20mm hex washer head stainless steel SEMS 4
28 999-1652 Washer M4.3 flat 1 (after SN 10314331)
29 999-0954 Nut M4-.7 nylon insert lock stainless steel 1 (after SN 10314331)
30 175-4349 Transaxle bracket 2
31 999-0787 Bolt M8-1.25 x 40mm hex head full thread stainless steel 2 (after SN 10492843)
32 999-0024 Washer 5/16 flat stainless steel 2
33 999-0784 Screw M8-1.25 x 16mm hex head stainless steel 4 (before SN 10492843)
34 999-9079 Screw M8 x 80mm hex head stainless steel 2 (before SN 10492843)
35 999-0355 Washer 3/8 x 7/8 SAE flat stainless steel 8 (before SN 10492843)
36 999-0770 Screw M8-1.25 x 30mm flat head socket stainless steel 4 (before SN 10492843)
N/S 175-0921 Wire tie 2