- Batteries, Brushes, and Chargers

Click to enlarge

#	Part	Description
01	162-0005	6V 305Ah wet battery (SNSR)
02	162-0019	6V 390Ah wet battery (SNSR)
03	162-0046	6V 335Ah AGM battery (Group J305) (SNSR)
04a	162-5063	36V 20amp battery charger with SB175 large gray plug
04b	162-5063	36V 20amp battery charger with SB175 large gray plug
06	372-1153	36V 25amp onboard battery charger
07	272-0479	36V onboard charger kit
08	991-2112	175amp charger plug with pins (gray) SB175
09	998-0010	Battery jumper cable - ring type (red)
10	996-0721	Pad driver
11	991-2206	Center-Lok 3 pad holder
12	996-0927	Extra heavy grit stripping brush - 46 grit
13	996-0851	Extra heavy grit stripping brush - 46 grit
14	996-0928	Lite grit scrubbing brush - 500 grit
15	172-8114	Prolene brush
16	996-0929	Polypropelene scrubbing brush
17	172-8461	14 inch union mix brush
18	996-0931	Medium grit scrubbing brush - 180 grit
19	996-3177	Midlite grit brush

- Pad Holders

Click to enlarge

#	Part	Description	Notes
1	991-2214	Center-Lok II pad holder - left hand thread (red)
2a	991-2201	Center-Lok II pad holder - right hand thread (black)	(Pad driver side female, Floor side male)
2b	991-8577	Pad retainer	(Pad driver side male, Floor side female)
3a	991-2202	Big mouth pad holder set (blue)	(includes 3 screws)
3b	991-2205	Deep lock ring and pad grip ring
4	991-2203	Big mouth pad holder male thread portion
5	991-2206	Center-Lok 3 pad holder	(includes 3 screws)
6	996-0372	Big mouth pad holder (left hand thread)
7	N/A	Not available
8	991-2209	Split retainer - pad holder ring (OBSOLETE)
9	N/A	Not available	(replaced by #3 991-2202)
10	991-2211	Center lock pad holding cup (male) (yellow) (OBSOLETE)

- Pads

Click to enlarge

#	Part	Description
01	255-1440	14 inch aqua plus burnishing pad (pkg of 5)
02	255-1435	14 inch Armadillo concrete scrubbing pad (pkg of 5)
03	255-1464	14 inch Blue ace pad (pkg of 5)
04	255-1442	14 inch Blue Jay burnishing pad (pkg of 5)
05	255-1412	14 inch Cure white pad (pkg of 5)
06	255-1477	14 inch Diamondback extreme stripping pad (pkg of 5)
07	255-1438	14 inch EHD Extra Heavy Duty Concrete Leveling Pad (pkg of 2
08	255-1421	14 inch gorilla lite burnishing pad (pkg of 5)
09	255-1450	14 inch gorilla spray buff/polish/burnish pad (pkg of 5)
10	255-1465	14 inch Heat concrete bonding pad (pkg of 5)
11	255-1430	14 inch jaguar burnishing pad (pkg of 5)
12	255-1487	14 inch Melamine Mela-Kleen pad (pkg of 2)
13	255-1490	14 inch premium black stripping pad (pkg of 5)
14	255-1470	14 inch premium blue cleaning pad (pkg of 5)
15	255-1492	14 inch premium brown stripping pad (pkg of 5)
16	255-1480	14 inch premium green scrubbing pad (pkg of 5)
17	255-1460	14 inch premium red scrubbing pad (pkg of 5)
18	255-1452	14 inch premium tan polishing pad (pkg of 5)
19	255-1420	14 inch premium white polishing pad (pkg of 5)
20	255-1411	14 inch superspeed rubberized pad (pkg of 5)
21	255-1495	14 inch razorback stripping pad (pkg of 5)
22	255-1447	14 inch Redwood maroon floor prep pad (pkg of 10)
23	255-1455	14 inch Ruff non-abrasive brush pad (pkg of 2)
24	255-1423	14 inch sand screen driver pad (pkg of 2)
25	255-0120	14 inch Professional sand screen 100 grit (pkg of 10)
26	255-0121	14 inch Professional sand screen 120 grit (pkg of 10)
27	255-0122	14 inch Professional sand screen 180 grit (pkg of 10)
28	255-0119	14 inch Professional sand screen 60 grit (pkg of 10)
29	255-0205	14 inch Superscreen sand screen 100 grit (OBSOLETE)
30	255-0206	14 inch Superscreen sand screen 120 grit (pkg of 10)
31	255-0207	14 inch Superscreen sand screen 180 grit (pkg of 10)
32	255-0204	14 inch Superscreen sand screen 60 grit (pkg of 10)
33	255-1424	14 x 20 inch Tiger carpet bonnet (pkg of 2)
34	255-9549	14 inch Diamond by Gorilla 11000 Grit (pkg of 2)
35	255-9546	14 inch Diamond by Gorilla 1500 Grit (pkg of 2)
36	255-9543	14 inch Diamond by Gorilla 200 Grit (pkg of 2)
37	255-9547	14 inch Diamond by Gorilla 3000 Grit (pkg of 2)
38	255-9544	14 inch Diamond by Gorilla 400 Grit (pkg of 2)
39	255-9545	14 inch Diamond by Gorilla 800 Grit (pkg of 2)
40	255-9548	14 inch Diamond by Gorilla 8000 Grit (pkg of 2)
41	255-9639	14 inch Diamond starter pack (1 of each grit)
42	255-1482	14 inch Turbostrip segmented rotary pad (pkg of 4)
43	255-1415	14 inch Duala clean and shine pad - low speed (pkg of 5)
44	255-1416	14 inch 2001 Duala clean shine padhighspeed (pkg 5)(OBSOLETE

Chassis Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	372-2096	Cable tie	1
2	999-0114	Washer 1/2 SAE flat	2
3	272-5393	Screw 5/16-18 x 4 hex head full thread	1
4	172-2001	Hair cotter pin	1
5	999-1128	Bolt M12-1.75 x 35mm hex hd stainless steel part thread	2
6	272-1605	Bolt M10-1.5 x 20mm hex head nylon lock	2
7	999-0430	Nut 5/16-18 hex jam plain finish	1
8	172-2067	Washer 11/32 x 1/8 flat	2
9	272-1606	Washer flat	2
10	172-0024	Bushing	2
11	172-8803	Edge trim	4
12	999-1129	Screw 1/4-20 x 1/2 pan head phillips thread rolling zinc	1
13	272-1843	Flanged bearing	2
14a	172-3283	Wheel and bearing assembly	2	(each assembly includes two bearings)
14b	272-3931	Ball bearing	4
15	172-3286	Actuator pin	1
16	272-0404	Arm weldment linkage	1
17	272-6040	Chassis weldment	1
18	999-0406	Washer 5/16 internal star lock zinc plated	1
N/S	997-2101	6 inch cable tie	5
N/S	997-2102	Cable tie	9

Detergent Injection Assembly - AXP/EDS

Click to enlarge

#	Part	Description	Req	Notes
0a	272-9954	Detergent injection assembly	1	(includes 1-21)(only used on AXP models)
0b	272-6041	Detergent injection assembly	1	(includes 1-22) (only used on EcoFlex models. AXP models are no longer in production and have been replaced by EcoFlex models)
1	172-0369	Washer 17/64 x 3/4 x 23/64 flat	3
2	997-2103	8 inch cable tie	2
3	999-0211	Nut 5/16-18 hex nylon insert lock zinc plated	8
4	999-0152	Nut 1/4-20 nylon insert lock zinc plated	2
5	999-0508	Screw 1/4-20 x 1/2 pan head phillips zinc plated	3
6	172-4451	Screw 1/4-20 x 3/8 pan phillips stainless steel	5
7	272-2174	Snub bushing	1
8	172-0032	Gasket 1/16 x 1/2 x 120 (OBSOLETE)	1
9a	272-9955	Control assembly	1	(only used on AXP models)
9b	272-6042	Control assembly	1	(only used on EcoFlex models. AXP models are no longer in production and have been replaced by EcoFlex models)
10a	272-5397	Control decal	1	(only used on AXP models)
10b	272-6043	Graphic overlay	1	(only used on EcoFlex models. AXP models are no longer in production and have been replaced by EcoFlex models)
11	272-5398	Detergent tray	1
12a	272-5399	Detergent box weldment	1	(only used on AXP models)
12b	272-6044	Chemical box weldment	1	(only used on EcoFlex models. AXP models are no longer in production and have been replaced by EcoFlex models)
13	272-5400	Detergent cover	1
14	272-6045	Pump cover	1
15	272-6046	Detergent pad	1
16	272-5403	Detergent pump	1
17	272-5404	Chemical resistant hose	1
18a	272-2179	Chemical bottle assembly	1	(only used on AXP models)
18b	272-2346	Indicator assembly	1	(only used on AXP models)
18c	272-9375	Chemical bottle assembly		(includes 18-20)(only used on AXP models)
18d	272-9832	Chemical bottle assembly	1	(only used on EcoFlex models. AXP models are no longer in production and have been replaced by EcoFlex models)
18e	272-9833	Chemical bottle assembly	1	(includes 18-20)(only used on EcoFlex models. AXP models are no longer in production and have been replaced by EcoFlex models)
19	272-2180	Solution fill cap	1
20	272-2184	Dry break insert	1
21	272-2182	Dry break cap	1
22	272-6047	Chemical ratio decal	1	(only used on EcoFlex models. AXP models are no longer in production and have been replaced by EcoFlex models)

Drive and Brake Pedal Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	172-3308	Pedal weldment	1	(includes 2-9)
2	999-0123	Washer 1/4 SAE flat zinc plated	4
3	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	1
4	999-0469	Nut M6-1 nylon insert lock zinc plated	5
5	999-1162	Bolt M6-1 x 75mm hex head part thread zinc	3
6	272-6048	Brake lock	1
7	172-3306	Pedal mat	1
8	272-6049	Brake bracket	1
9	272-6050	Pedal weldment	1
10	999-0522	Screw 1/4-20 x 1/2 pan head phillips stainless steel	2
11	272-8880	Foot pedal assembly	1
12	272-6051	Pedal mounting plate	1
13	999-0152	Nut 1/4-20 nylon insert lock zinc plated	2
14	999-1895	Screw 1/4-20 x 7/8 flat head phillips stainless steel	2
15	999-0510	Screw 1/4-20 x 1 pan head phillips zinc plated	1
16	999-0567	Screw 1/4-20 x 5/8 pan head phillips stainless steel	4

Electrical Panel Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	272-5406	Electrical panel	1
2	999-0509	Screw 1/4-20 x 3/8 pan head phillips zinc plated	9
3	999-1131	Screw 8-32 x 3/8 pan head phillips thread rolling SS	1
4	172-8839	Backup alarm	1
5	172-0103	Electrical mount	3
6	172-0345	Terminal stud	3
7a	172-8836	150amp fuse	1
7b	991-3061	150amp fuse	1	(NON-OEM)
8	999-0029	Bolt 5/16-18 x 1/2 hex head plain finish	4
9	999-0406	Washer 5/16 internal star lock zinc plated	4
10	999-0152	Nut 1/4-20 nylon insert lock zinc plated	3
11	172-8826	Gasket	1
12	272-8184	36V 100amp contactor	1	(Vacuum motor)
14	272-5407	Electrical cover	1
15	999-0123	Washer 1/4 SAE flat zinc plated	6
16	999-0567	Screw 1/4-20 x 5/8 pan head phillips stainless steel	2
17	172-0232	Clear boot cap	1
18	172-0231	Reset button boot	1
19	272-8183	36V 200amp contactor	1	(Brush drive)
20	272-8183	36V 200amp contactor	1	(Drive wheel)
21	999-0430	Nut 5/16-18 hex jam plain finish	4
22	999-0267	Screw 10-24 x 1/2 pan head phillips zinc	3
23	272-6052	Speed controller	1
24	172-2160	10amp circuit breaker	1	(Circuit control)
25	172-2523	70amp circuit breaker	1	(Drive wheel)
26	272-5409	Harness guide weldment	1	(Detergent injection models only)
27	999-0567	Screw 1/4-20 x 5/8 pan head phillips stainless steel	4

Front Wheel Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	999-0005	Screw 5/16-18 x 7/8 socket head	1
2	999-0211	Nut 5/16-18 hex nylon insert lock zinc plated	1
3	272-1652	Bolt 3/8-16 x 5/6 lock	4
4	999-1379	Screw M8-1.25 x 70mm socket head stainless steel	4
5	999-1828	Screw M8-1.25 x 55mm socket head stainless steel	4
6	172-2067	Washer 11/32 x 1/8 flat	1
7	172-3315	Bearing cup	1
8	172-3316	Bearing cone	1
9	172-3317	Seal	1
10	172-0435	Top bearing	1
11	172-1384	Spring	1
12	172-0951	Nut 1-14 hex thin nylock UNF	1
13	991-5122	1/4 nylon tree push-in rivet	3
14	172-3319	Bearing block	1
15	172-3320	Steering plate	1
16	172-3321	Brake rod	1
17a	272-7361	Drive motor	1
17b	272-5411	Drive wheel	1	(Wheel only)
18	172-3327	Splash guard plate	1
19	172-3328	Splash guard	1
20	172-3329	Spindle weldment	1
21	172-3330	P clamp	1
22	999-1556	Screw M4-.7 x 8mm pan head phillips zinc plated	1
23	999-1861	Screw 10-24 x 7/8 pan head phillips stainless steel	1
24	999-0960	Nut 10-24 hex stainless steel	1
25	999-0377	Washer 6 SAE flat plain finish	1
N/S	272-6053	Front wheel service kit	1	(kit includes 1 connectio box, 2 curved brushes, 1 brush holder and hardware)
N/S	272-6054	Drive motor kit	1
N/S	272-6055	Drive wheel harness kit	1

Recovery Assembly

Click to enlarge

#	Part	Description	Req	Notes
1	999-0477	Screw 10-24 x 5/16 truss head phillips zinc	8
2	999-0123	Washer 1/4 SAE flat zinc plated	7
3	999-1030	Screw 1/4-20 x 2 pan head phillips stainless steel	6
4	999-0456	Screw 1/4-20 x 3/4 pan head phillips stainless steel	4
5	999-0419	Screw 1/4-20 x 5/8 flat head slotted zinc plated	12
6	999-0399	Screw 5/16-18 x 3/4 pan head phillips zinc plated	1
7	999-0332	Screw 10-24 x 5/8 pan head phillips stainless steel	5
8	182-0034	Screw 10-14 x 1/2 pan head plastite	2
9	172-0517	Float cage half (2 required for full float cage)	2
10	272-1253	Vacuum hose 2 x 6	1
11	272-1233	Gasket	1
12	181-0269	P clamp	1
13	172-0192	Float ball	1
14	272-1159	Plastic clamp	1
15	997-2003	Hose clamp	3
16	172-3169	Plastic clamp	1
17	172-3335	Foam cylinder	2
19	172-3337	Top panel muffler	1
20	172-3338	Bottom panel muffler	1
21	272-6565	Gasket strip	1
22	172-3333	Cover pivot pin	1
23	272-8999	Exhaust cover	1
24	172-0126	Acoustical foam	1
25	272-9000	Vacuum motor cover	1
26	272-9139	Recovery tank lid	1
27	172-3344	Tank mount bracket	2
28	999-1862	Washer #10 flat SAE stainless steel	9
29	172-3346	Recovery tank lid gasket	1
30	172-3347	Filter screen	1
31	172-3348	Filter	1
32	172-3349	Separator plate	1
33	172-3357	9 inch wire rope	1
34	272-5303	Recovery tank lid and gasket	1
35	172-3351	Vibration mount	3
36	172-3353	Vacuum muffler	1
37	997-2102	Cable tie	1
38	172-3358	Spring	1
39a	272-6298	Vacuum hose assembly	1	(OEM)
39b	991-5152	Vacuum hose assembly	1	(NON-OEM)
40	272-5412	Recovery tank	1
41a	272-5577	Drain hose	1
41b	375-3216	Drain hose assembly (black)	1
42	272-6033	Rear bumper	2
43	272-6034	Rear middle bumper	1
44	272-0430	Vacuum duct gasket	2
45	272-1252	Sound foam	1
46a	272-9272	36V 3 stage vacuum motor	1	(OEM)
46b	991-1237	36V 3 stage vacuum motor bypass dual ball tangential	1	(NON-OEM)
46c	991-1221	Carbon brush without plastic cover (pkg of 2)	1
47	272-1254	Sound foam (OBSOLETE)	1
48	272-6778	Strainer basket	1
49	272-6035	Recovery tank tube	1
N/S	272-8537	Drain hose cap assembly	1
N/S	272-9273	19 inch drain hose extension	1
N/S	172-3359	Vacuum harness	1

Scrub Deck Assembly - Disc

Click to enlarge

#	Part	Description	Req	Notes
1	999-0211	Nut 5/16-18 hex nylon insert lock zinc plated	2
2	999-0549	Washer 5/16 x 3/4 SAE flat stainless steel	18
3	997-2509	Cotter pin 1/8 x 3/4 stainless steel	4
4a	172-3375	Square keyway	2	(Standard on 28 inch models, 32 inch models before SN 1931776)
4b	272-5430	Scrub deck blade kit gum rubber	1	(32 inch models only after SN 1931775)
4c	272-5431	Scrub deck blade kit red gum rubber	1	(32 inch models only after SN 1931775)
5	999-0494	Bolt 5/16-18 x 7/8 hex head stainless steel	4
6	999-0496	Nut M8-1.25 nylon insert lock stainless steel	6
7	999-0497	Nut M6-1 nylon insert lock stainless steel	12
8	999-0507	Bolt M6-1 x 16mm hex head full thread plain finish	8
9	999-1312	Screw M6-1 x 20mm hex head stainless steel	4	(28 inch model)
10	999-0501	Bolt M8-1.25 x 25mm hex head full thread stainless steel	6
11	999-0360	Screw 1/4-20 x 3/8 hex head thread rolling unslotted	2
12	999-0409	Screw 10-24 x 3/8 pan head slotted zinc plated	6
13	172-3047	Washer 11/32 x 1/8 flat	4
14	999-1129	Screw 1/4-20 x 1/2 pan head phillips thread rolling zinc	4
15	999-0430	Nut 5/16-18 hex jam plain finish	4
16	999-0588	Washer 7/8 flat stainless steel	2
17	172-9009	Tee barb	2
18	172-0155	Stop plate	2
19	175-2612	Spring clip	2
20	181-0269	P clamp	2
21a	172-8921	Actuator	1
21b	172-8922	Plastic drive nut	1
22	172-2070	Thermoid disk	4
23	572-9330	Knob	4
24	172-9282	Knob	4
25	172-8941	Compression spring	1
26	N/A	Not available	1	(Spring housing)
27	172-8953	Compression spring	1
28	172-8954	Nut retainer	1
29	172-8955	Nut retainer	1
30a	999-9116	Screw M6-1 x 12mm hex head stainless steel	16	(Standard on 28 inch models, 32 inch models before SN 1931776)
30b	999-0185	Screw 3/8-16 x 3/4 flat head slotted zinc plated	6	(32 inch models only after SN 1931775)
31	991-5122	1/4 nylon tree push-in rivet	18	(OEM)
31	991-5122	1/4 nylon tree push-in rivet	18	(NON-OEM)
32	999-0785	Screw M8-1.25 x 30mm hex head stainless steel	6
33	999-1377	Nut M12-1.75 hex jam	4
34	999-1349	Screw M12-1.75 x 70mm full thread hex head stainless steel	4
35	172-3360	Ring pin 1/2 x 1-1/4	2
37	272-1035	Solution hose	1
38	172-2327	Wire reinforced clear hose (OBSOLETE)	1
39	172-2089	Drive plate	2
40	172-2088	Drive hub (OBSOLETE)	2
41a	272-6069	Motor bracket	2	(Standard on 28 inch models, 32 inch models before SN 1931776)
41b	272-6070	Motor bracket	2	(32 inch models only after SN 1931775)
42a	172-3380	Deck weldment - disc	1	(28 inch)
42b	272-6072	32 inch disk deck weldment	1	(32 inch)
43a	172-3386	Motor gearbox assembly	1	(28 inch model)
43b	172-3387	Motor gearbox assembly	1	(32 inch model)
43c	172-3388	Square keyway	2
43d	172-3389	Gearbox cover	2
43e	172-3390	Gearbox	2
43f	172-3391	Bearing	1
43g	172-8862	Brush side ball bearing	1
43h	172-3393	Brush ring	1
43i	172-3394	Carbon brush (sold individually)	4
43j	172-3395	Safety hook	1
45	272-6073	Forward skirt bracket	2	(28 inch model)
47	172-3368	Cotterless hitch pin	1
48	172-3369	Quick disconnect male coupling	1
49	172-3388	Square keyway	2	(Standard on 28 inch models, 32 inch models before SN 1931776)
50	172-3389	Gearbox cover	2	(Standard on 28 inch models, 32 inch models before SN 1931776)
51a	172-3411	28 inch skirt blade kit gum rubber disk	1	(before SN 1797475)
51b	172-3414	32 inch skirt blade kit gum rubber disk	1	(before SN 1797475)
51c	272-1442	28 inch blade kit gum rubber	1	(after SN 1797476)
51d	272-1446	32 inch blade kit gum rubber	1	(after SN 1797476)
52	172-9011	3/8 spiral hose	1
53a	272-5433	28 inch left skirt assembly	1
53b	272-5434	32 inch left skirt assembly	1
54	272-5435	Right skirt assembly	1
55	181-0125	Vinyl tube	1
56	272-1384	Tee barb	1
57	172-2503	Tank leveler	2
58	172-9010	Solution drain hose	2
59a	272-5436	Gearbox assembly	1	(32 inch models only after SN 1931775)
59b	272-5437	Gearbox	2

Solution Assembly - Standard

Click to enlarge

#	Part	Description	Req	Notes
1	999-0024	Washer 5/16 flat stainless steel	4
2	999-1862	Washer #10 flat SAE stainless steel	3
3	999-0454	Screw 10-24 x 1/2 truss head phillips zinc plated	4
4	999-0030	Bolt 5/16-18 x 5/8 hex head grade 5 zinc plated	4
5	999-0571	Screw 10-24 x 3/8 pan head phillips stainless steel	3
6	999-0567	Screw 1/4-20 x 5/8 pan head phillips stainless steel	3
7	999-0123	Washer 1/4 SAE flat zinc plated	11
8	999-1030	Screw 1/4-20 x 2 pan head phillips stainless steel	1
9	999-0456	Screw 1/4-20 x 3/4 pan head phillips stainless steel	2
10	999-1376	Screw 6-32 x 1/2 hex head stainless steel	1
11	999-0400	Screw 10-24 x 1 pan head phillips zinc plated	5
12	272-6099	Front middle bumper	1
13	999-0399	Screw 5/16-18 x 3/4 pan head phillips zinc plated	2
14	999-0211	Nut 5/16-18 hex nylon insert lock zinc plated	1
15	999-0227	Nut 6-32 hex nylon insert lock jam zinc plated	1
16	999-0190	Nut 1/4-20 hex plain finish	3
17	999-0333	Screw 10-24 x 1/2 pan head phillips stainless steel	7
18	999-0599	Screw 1/4-20 x 1 3/4 pan head phillips stainless steel	3
19	272-9417	Seat switch	1
20	999-0517	Bolt M8-1.25 x 16mm hex head full thread zinc	3
21	172-0392	Retaining ring	2
22	999-0471	Nut M8-1.25 nylon insert lock zinc plated	3
23	172-0553	Washer 17/64 x 1/16 flat	2
24	172-2067	Washer 11/32 x 1/8 flat	4
25	999-0998	Washer #10 flat stainless steel	4
26	172-8494	#6 hose clamp SAE	4
27	172-0254	Nylon pipe cap	1
28	172-9023	Cable clamp	1
29	172-0197	Rubber washer	1
30	172-0223	Battery cable boot	2
31	272-1448	90 degree elbow barb	1
32	272-2589	Hinge	1
33	170-0264	Hose barb	1
34	172-3429	Bushing	1
35	172-8870	P clamp	1
36	372-2096	Cable tie	2
37	999-1454	Bolt 5/16-18 x 5/8 pan head stainless steel	1
38	181-0421	Spacer	2
39	181-0176	Phenolic spacer	1
40	172-2105	Manual solution valve	1
41	172-2327	Wire reinforced clear hose (OBSOLETE)	1
42a	272-6335	Seat (OBSOLETE)	1
42b	172-3430	Seat kit	1
43	272-6100	Solution tank	1
44	172-3432	Solution tank cover (OBSOLETE)	1
45	172-3433	Gasket	1
46a	272-7243	Control board kit	1	(includes 46b - 46d)(272-5329 is obsolete and replaced by 272-7243 and is used on all models)
46b	272-8156	Panel assembly	1
46c	272-1316	Key switch assembly	1
46d	172-8098	Replacement key	1
47	272-1451	Tee barb	1
48	272-1460	Water valve bracket	1
49	172-3437	Cable clamp	5
50	272-6101	Front bumper (OBSOLETE)	2
51	172-3438	Actuator cover	1
52	172-3439	Disconnect bar	1
53	272-6102	Tank mount bracket	1
54	272-6103	Seat mount weldment	1
55	172-3441	Prop rod	1
57	172-3443	Charger connector assembly	1
58	172-3444	Hinge bracket	1
59	272-2594	Tube	1
60	272-1459	Valve bracket	1
61	172-3447	Battery box panel	1
62	272-1461	Strainer	1
63	272-1038	Hose	1
64	172-2155	Spacer	1
65	272-2586	36V solenoid valve	1
66	172-1770	Connector assembly	1
67	272-1462	Clear hose 3/4 inches	1
68	172-2071	P clamp	1
69	172-3449	Battery connector kit	1	(includes items 70-73a)(Battery Connector Kit 172-3449 is included with machine)
70	272-1144	Cable assembly	4
71	372-2096	Cable tie	10
72	172-0223	Battery cable boot	10
73a	172-3450	Battery cable assembly- ring type 4x15 1/2	1
73b	172-3451	Battery spacer	1
74	272-0462	Cable clamp	4
75	372-0047	Screw 10-24 x 2 pan head phillips	4
76	999-0419	Screw 1/4-20 x 5/8 flat head slotted zinc plated	12
77	172-1062	7 inch spiral hose	1
78	272-1469	Solution valve	1
79	997-2004	Hose clamp	4
81	999-0424	Bolt 5/16-18 x 1 hex head stainless steel	4
N/S	272-6637	Main wiring harness	1

Squeegee Assembly

Click to enlarge

#	Part	Description	Req	Notes
0a	272-6036	28 inch squeegee assembly	1	(These squeegee assemblies include red gum rubber blades. The squeegee tool casting is not available for sale separately. If you need to replace the casting please order a complete squeegee assembly.)
0b	272-6037	34 inch squeegee assembly	1	(These squeegee assemblies include red gum rubber blades. The squeegee tool casting is not available for sale separately. If you need to replace the casting please order a complete squeegee assembly.)
0c	272-5565	Squeegee assembly	1	(These squeegee assemblies include red gum rubber blades. The squeegee tool casting is not available for sale separately. If you need to replace the casting please order a complete squeegee assembly.)
1	999-0423	Nut 5/16-18 nylon insert lock stainless steel	2
2	999-0688	Bolt 5/16-18 x 1 1/4 hex head stainless steel	2
3	999-0227	Nut 6-32 hex nylon insert lock jam zinc plated	2	(before May 2012)
4	999-0336	Screw 6-32 x 3/8 pan head phillips stainless steel	2	(before May 2012)
5	999-9004	Washer 5/16 SAE flat stainless steel	2
6	999-0688	Bolt 5/16-18 x 1 1/4 hex head stainless steel	1
7	272-3671	Screw 5/16-18 x 1 1/4 thumb stainless steel	1
8	999-1019	Nut 5/16-18 hex jam stainless steel	1
9	272-9868	Button plug	2
10	172-4099	Nut 5/16-18 thumb	2
11	172-0094	Latch	1	(before May 2012)
12	272-9881	Wheel	2
13a	272-3677	Front strap	1	(28" models)
13b	272-3683	Front strap	1	(32" and 35" models)
13c	272-7393	Front strap	1	(38" models)
14a	272-3679	Band clamp	1	(28" models after May 2012)
14b	272-3686	Band clamp	1	(32" and 35" models after April 2012)
14c	272-6038	Band clamp assembly	1	(38" models after June 2012)
15	272-9882	Bushing	2
16a	272-3675	Squeegee blade kit 28 inch Linatex (red)	1	(28" models after October 2011)(squeegee blade kits include both front and rear squeegee blades)(these squeegee blades are desinged to provide increased performance and reduced streaking. When installing thse blades on a machine built before November 2011 you must also order a new rear strap part number 272-7285)
16b	272-3675	Squeegee blade kit 28 inch Linatex (red)	1	(28" models before November 2011)(squeegee blade kits include both front and rear squeegee blades)
16c	272-3682	Squeegee blade kit 34 inch gum rubber (red)	1	(32" and 35" models)(squeegee blade kits include both front and rear squeegee blades)
16d	272-7171	Squeegee blade kit red gum rubber	1	(38" models)(squeegee blade kits include both front and rear squeegee blades)
16e	372-4042	Squeegee blade kit 28 inch gum rubber	1	(after October 2011)(squeegee blade kits include both front and rear squeegee blades)(these squeegee blades are desinged to provide increased performance and reduced streaking. When installing thse blades on a machine built before November 2011 you must also order a new rear strap part number 272-7285)(optional)
16f	272-8961	Squeegee blade kit 28 inch gum rubber	1	(before November 2011)(squeegee blade kits include both front and rear squeegee blades)(optional)
16g	272-3675	Squeegee blade kit 28 inch Linatex (red)	1	(standard after October 2011)(squeegee blade kits include both front and rear squeegee blades)(these squeegee blades are desinged to provide increased performance and reduced streaking. When installing thse blades on a machine built before November 2011 you must also order a new rear strap part number 272-7285)
16h	272-3675	Squeegee blade kit 28 inch Linatex (red)	1	(standard after November 2011)(squeegee blade kits include both front and rear squeegee blades)
16i	272-3673	Squeegee blade kit 28 inch urethane	1	(after October 2011)(squeegee blade kits include both front and rear squeegee blades)(these squeegee blades are desinged to provide increased performance and reduced streaking. When installing thse blades on a machine built before November 2011 you must also order a new rear strap part number 272-7285)(optional)
16j	272-3673	Squeegee blade kit 28 inch urethane	1	(before November 2011)(squeegee blade kits include both front and rear squeegee blades)(32" and 35" model squeegee blade kits)(optional)
16k	172-4688	Squeegee blade kit 34 inch gum rubber	1	(squeegee blade kits include both front and rear squeegee blades)(optional)
16l	272-3682	Squeegee blade kit 34 inch gum rubber (red)	1	(standard)(squeegee blade kits include both front and rear squeegee blades)
16m	572-8127	Polyurethane squeegee blade kit (L)	1	(squeegee blade kits include both front and rear squeegee blades)(38" model squeegee blade kits)(optional)
16n	272-6039	Squeegee blade kit 38 inch gum rubber	1	(squeegee blade kits include both front and rear squeegee blades)(optional)
16o	272-7171	Squeegee blade kit red gum rubber	1	(standard)(squeegee blade kits include both front and rear squeegee blades)(optional)
16p	272-6617	Squeegee blade kit 28 inch urethane	1	(squeegee blade kits include both front and rear squeegee blades)(optional)
17a	272-7285	28 inch weldment and rear band kit	1	(28" models before June 2012)
17b	272-3684	Rear strap	1	(32" and 35" models before May 2012)
17c	272-7392	Rear strap	1	(38" models before July 2012)