- Batteries, Brushes, and Chargers

#PartDescription ReqNotesAvailability
1 162-0002 12V 185Ah wet battery (SNSR) 2
2 162-0047 12V 215Ah AGM battery (Group J185) (SNSR) 2
3 162-5060 24V 20amp battery charger with small SB50 red plug 1 (configured for wet batteries; can be changed to support AGM batteries)
4 162-5070 24V 20amp AGM battery charger with small SB50 red plug 1 (configured for AGM batteries; can be changed to support wet batteries)
5 991-9284 50amp charger plug SB50 with pins (red) 1
6 996-0390 13 inch heavy grit stripping brush - 80 grit 2
7 996-0253 13 inch medium grit scrubbing brush - 180 grit 2
8 996-0391 13 inch lite grit scrubbing brush - 500 grit 2
9 996-3773 13 inch daily cleaning brush 2
10 996-0056 Pad driver 2
11 996-0336 Clutch plate with brush holder spring 2

- Pad Holders

#PartDescription ReqNotesAvailability
1 991-2214 Center-Lok II pad holder - left hand thread (red)
2a 991-2201 Center-Lok II pad holder - right hand thread (black) (Pad driver side female, Floor side male)
2b 991-8577 Pad retainer (Pad driver side male, Floor side female)
3a 991-2202 Big mouth pad holder set (blue) (includes 3 screws)
3b 991-2205 Deep lock ring and pad grip ring
4 991-2203 Big mouth pad holder male thread portion
5 991-2206 Center-Lok 3 pad holder (includes 3 screws)
6 996-0372 Big mouth pad holder (left hand thread)
7 N/A Not available
8 991-2209 Split retainer - pad holder ring (OBSOLETE)
9 N/A Not available (replaced by #3 991-2202)
10 991-2211 Center lock pad holding cup (male) (yellow) (OBSOLETE)

- Pads

#PartDescription ReqNotesAvailability
01 255-1340 13 inch aqua plus burnishing pad (pkg of 5)
02 255-1335 13 inch Armadillo concrete scrub pad (pkg of 5) (OBSOLETE)
03 255-1364 13 inch Blue ace pad (pkg of 5)
04 255-1342 13 inch Blue Jay burnishing pad (pkg of 5)
05 255-1312 13 inch Cure white pad (pkg of 5) (OBSOLETE)
06 255-1377 13 inch Diamondback extreme stripping pad (pkg of 5)
07 255-1338 13 inch EHD Extra Heavy Duty Concrete Leveling Pad (pkg of 2
08 255-1321 13 inch gorilla lite burnishing pad (pkg of 5)
09 255-1350 13 inch gorilla spray buff/polish/burnish pad (pkg of 5)
10 255-1365 13 inch Heat concrete bonding pad (pkg of 5)
11 255-1330 13 inch jaguar burnishing pad (pkg of 5)
12 255-1387 13 inch Melamine Mela-Kleen pad (pkg of 2)        
13 255-1390 13 inch premium black stripping pad (pkg of 5)
14 255-1370 13 inch premium blue cleaning pad (pkg of 5)
15 255-1392 13 inch premium brown stripping pad (pkg of 5)
16 255-1380 13 inch premium green scrubbing pad (pkg of 5)
17 255-1360 13 inch premium red scrubbing pad (pkg of 5)
18 255-1352 13 inch premium tan polishing pad (pkg of 5)
19 255-1320 13 inch premium white polishing pad (pkg of 5)
20 255-1311 13 inch superspeed rubberized pad (pkg of 5)
21 255-1395 13 inch razorback stripping pad (pkg of 5)
22 255-1347 13 inch Redwood maroon floor prep pad (pkg of 10)
23 255-1355 13 inch Ruff non-abrasive brush pad (pkg of 2)
24 255-1323 13 inch sand screen driver pad (pkg of 2)
25 255-0198 13 inch Superscreen sand screen 100 grit (pkg of 10)
26 255-0199 13 inch Superscreen sand screen 120 grit (pkg of 10)
27 255-0200 13 inch Superscreen sand screen 150 grit (pkg of 10)
28 255-0201 13 inch Superscreen sand screen 180 grit (pkg of 10)
29 255-0202 13 inch Superscreen sand screen 220 grit (pkg 10)(OBSOLETE)
30 255-0203 13 inch Superscreen sand screen 400 grit (pkg of 10)
31 255-0196 13 inch Superscreen sand screen 60 grit(pkg of 10) (OBSOLETE
32 255-0197 13 inch Superscreen sand screen 80 grit (pkg of 10)
33 255-0113 13 inch Professional sand screen 100 grit (pkg of 10)
34 255-0114 13 inch Professional sand screen 120 grit (pkg of 10)
35 255-0115 13 inch Professional sand screen 150 grit (pkg of 10)
36 255-0116 13 inch Professional sand screen 180 grit (pkg of 10)
37 255-0117 13 inch Pro sand screen 220 grit (pkg of 10) (OBSOLETE)
38 255-0118 13 inch Professional sand screen 400 grit (pkg of 10)
39 255-0111 13 inch Professional sand screen 60 grit (pkg of 10)
40 255-0112 13 inch Professional sand screen 80 grit (pkg of 10)
41 255-1324 13 inch Tiger carpet bonnet (pkg of 2)
42 255-9542 13 inch Diamond by Gorilla 11000 Grit (pkg of 2)
43 255-9539 13 inch Diamond by Gorilla 1500 Grit (pkg of 2)
44 255-9536 13 inch Diamond by Gorilla 200 Grit (pkg of 2)
45 255-9540 13 inch Diamond by Gorilla 3000 Grit (pkg of 2)
46 255-9537 13 inch Diamond by Gorilla 400 Grit (pkg of 2)
47 255-9538 13 inch Diamond by Gorilla 800 Grit (pkg of 2)
48 255-9541 13 inch Diamond by Gorilla 8000 Grit (pkg of 2)
49 255-9638 13 inch Diamond starter pack (1 of each grit)
50 255-1382 13 inch Turbostrip segmented rotary pad (pkg of 4)(OBSOLETE)
51 255-1315 13 inch Duala clean and shine pad - low speed (pkg of 5)
52 255-1316 13 inch 2001 Duala clean and shine pad-high speed (OBSOLETE)

Brush Head Assembly

#PartDescription ReqNotesAvailability
001 999-0511 Screw 6-32 x 1 pan head phillips zinc plated 4
002 170-0191 Snap switch 1 (head up)
003 999-0227 Nut 6-32 hex nylon insert lock jam zinc plated 6
004 170-0192 Brush switch (scrub limit) 1 (scrub limit)
005 999-0081 Screw 1/4-20 x 5/8 pan head slotted zinc 4
006a 170-0235 Switch bracket (OBSOLETE) 1 (26I)
006b 170-0193 Switch bracket (OBSOLETE) 1 (32I and 38I)
007 999-0294 Nut 1/4-20 hex nylon lock type NE stainless steel 4
008a N/A Not available 1 (Resistor) (38I and 32I)
008b 170-0065 Resistor (OBSOLETE) 1 (26I)
009 170-0196 Clevis pin 3
010a 170-0197 Brush plate (OBSOLETE) 1 (32I)
010b 170-0237 Brush plate (OBSOLETE) 1 (26I)
010c 170-0238 Brush plate (OBSOLETE) 1 (38I)
011 170-0198 Hose clamp 2
012a 170-7018 Hose 2 (32I)
012b 154-0037 Tubing 1/2 x 5/8 (clear) (sold by the foot) 2 (26I)
012c 170-7018 Hose 2 (38I)
013 997-2002 Hose clamp #6 1
014 999-0034 Washer 3/8 split lock plain finish 8
015 999-0119 Bolt 3/8-16 x 3/4 hex head grade 5 zinc plated 8
016 999-0130 Screw 5/16-18 x 3/4 socket head alloy plain finish 2
017 NOTE Please See Batteries, Brushes, Pad Holders and Charger Pages (32I)
018 996-0336 Clutch plate with brush holder spring 2
019 999-0510 Screw 1/4-20 x 1 pan head phillips zinc plated 6
020 NOTE Please See Batteries, Brushes, Pad Holders and Charger Pages (32I)
021a 170-0207 Male gimbal with collar 2 (use your old gimbal collar (170-0233) on your new gimbal. The gimbal will not last long without the collar.)
021b 170-0353 Motor gimbal (32IX)
022 170-0135 Cotter pin (OBSOLETE) 3
023 170-0208 Water splitter (OBSOLETE) 1
024 999-0162 Bolt 5/16-18 x 1 1/4 hex head grade 5 zinc plated 2
025 164-0132 Square keyway 1/4 x 1/4 1
026a 170-0209 36V brush motor assembly 2 (OEM) (for 26I, 32I and 38I)
026b 991-2122 36V .75HP brush motor assembly with gear box 2 (NON-OEM) (you will also need to order 999-0130)
026c 999-0130 Screw 5/16-18 x 3/4 socket head alloy plain finish (for NON-OEM brush motor)
026d 991-8524 36V 1.0HP brush motor assembly with gear box (NON-OEM)
027 999-0160 Washer 1/4 x 1 1/4 fender zinc plated 3
028 999-0118 Nut 1/2-13 nylon insert lock zinc plated 8
029 170-0211 Linkage bar 4
030 999-0200 Bolt 1/2-13 x 1 1/4 hex head 8
031 170-0212 Flanged bearing 8
032 NOTE Please See Batteries, Brushes, Pad Holders and Charger Pages
033 170-0260 Solution hose 1
033 170-0222 plunger plate(obsolete) 1
034 170-0213 Nylon washer 4
035 170-0214 Head pressure sleeve (OBSOLETE) 1
036 170-0215 Spiral pin 3/16 3
037 170-0216 Head pressure pin (OBSOLETE) 1
038 170-0217 Head pressure tube (OBSOLETE) 1
039 170-0254 Main harness (OBSOLETE) 1
040 170-0233 Brush driver collar - See pop-up (OBSOLETE) 2 (38I and 32I)
041 170-0219 Actuator 1
042a 170-0255 Head pressure spring (OBSOLETE) 1 (38I and 32I)
042b 170-0220 Head pressure spring (OBSOLETE) 1 (26I)
043 170-0221 Spring seat (OBSOLETE) 1
044a 170-0081 Main frame (OBSOLETE) 1 (32I and 38I)
044b 170-0082 Main frame (OBSOLETE) 1 (26I)
045 170-0223 Battery tray (OBSOLETE) 1
046 NOTE Please See Batteries, Brushes, Pad Holders and Charger Pages
047a 170-0224 Battery cable 3
047b 998-0010 Battery jumper cable - ring type (red) 2 (For use with top, bolt type post batteries)
047c 991-6025 Wire 4 x14.5, 3/8 ring x 3/8 ring 2 (NON-OEM)
048 NOTE Please See Batteries, Brushes, Pad Holders and Charger Pages
049 170-0031 Brush holder spring 2
050 170-0226 Moving warning decal 3
051 N/A Not available 1 (Brush wiring decal)
052 170-0228 Battery label (OBSOLETE) 1
053 170-0229 Battery warning decal 2
054 170-0230 Falling parts warning decal 2
055a N/A Not available 2 (Pad holder) (can replace with 991-2206)
055b 991-2212 Plastic plate only (for 991-2207) (OBSOLETE)
056 999-0456 Screw 1/4-20 x 3/4 pan head phillips stainless steel 6
057 170-0231 Swing arm stop (OBSOLETE) 1
058 170-0178 Bracket 2
059 999-0211 Nut 5/16-18 hex nylon insert lock zinc plated 2
060 997-2505 Cotter pin 1
061 170-0705 Washer 1/2 x 3/64 8
062 999-0625 Screw 1/4-20 x 1 1/4 pan head phillips stainless steel 2
063 170-0706 Washer 3/4 rubber 2

Brush Housing Assembly

#PartDescription ReqNotesAvailability
001a 170-0298 Left hand brush housing for 32I (OBSOLETE) 1 (32I)
001b 170-0299 Left hand brush housing for 26I 1 (26I)
001c 170-0300 Left hand brush housing for 38I (OBSOLETE) 1 (38I)
002a 170-0301 Right hand brush housing for 32I (OBSOLETE) 1 (32I)
002b 170-0302 Right hand brush housing for 26I 1 (26I)
002c 170-0303 Right hand brush housing for 38I (OBSOLETE) 1 (38I)
003 999-0513 Nut 3/8-16 nylon insert lock type NE stainless steel 1
004 170-0304 Washer 15/32 x 1/32 1
005 170-0163 Guide wheel 1
006 999-0638 Bolt 3/8-16 x 2 1/4 hex head 1
007a 170-0305 Right hand strap for 32I (OBSOLETE) 1 (32I)
007b 170-0306 Right hand strap for 26I (OBSOLETE) 1 (26I)
007c 170-0307 Right hand strap for 38I (OBSOLETE) 1 (38I)
008a N/A Not available 1 (32I) (Right side skirt)
008b 170-0309 Right hand skirt for 26I 1 (26I)
008c 170-0020 Right hand skirt for 38I 1 (38I)
009 170-0019 Brush housing pin 1
010a 170-0310 Left hand skirt for 32I 1 (32I)
010b 170-0311 Left hand skirt for 26I 1 (26I)
010c 170-0312 Left hand skirt for 38I 1 (38I)
011a 170-0313 Left hand strap for 32I (OBSOLETE) 1 (32I)
011b 170-0314 Left hand strap for 26I (OBSOLETE) 1 (26I)
011c 170-0315 Left hand strap for 38I (OBSOLETE) 1 (38I)
012a 999-0294 Nut 1/4-20 hex nylon lock type NE stainless steel 13 (32I)
012b 999-0294 Nut 1/4-20 hex nylon lock type NE stainless steel 11 (26I)
012c 999-0294 Nut 1/4-20 hex nylon lock type NE stainless steel 14 (38I)
013a 999-0633 Bolt 1/4-20 x 5/8 hex head stainless steel 13 (32I)
013b 999-0633 Bolt 1/4-20 x 5/8 hex head stainless steel 11 (26I)
013c 999-0633 Bolt 1/4-20 x 5/8 hex head stainless steel 14 (38I)

Brush Motor Assembly - NON-OEM

#PartDescription ReqNotesAvailability
000a 991-2121 24V .75HP brush motor assembly with gear box 1 (includes 001-027)
000b 991-2122 36V .75HP brush motor assembly with gear box 1 (includes 001-027) (you will also need to order 000c and 000d)
000c 999-0038 Bolt 3/8-16 x 1 hex head grade 5 zinc plated 4
000d 999-0162 Bolt 5/16-18 x 1 1/4 hex head grade 5 zinc plated 1 (Needed for mounting the hub on the shaft)
001 164-1157 Bolt 1/4-20 x 7 3/4 thru 2
002 164-1095 Negative lead 1
003a 164-0337 Top end bell (OBSOLETE) 1
003b N/A Not available 1 (Commutator bracket assembly)
004 N/A Not available 1 (Brush board assembly)
005 999-0545 Screw 10-24 x 1/2 pan head phillips self-tapping 2
006 164-0329 Top rotor bearing 1 (Commutator end)
007a 164-1084 24V armature assembly (OBSOLETE) 1
007b 164-0341 36V armature assembly 1
008 164-0342 Armature vent fan 1
009 164-0343 Stator frame assembly with magnets 1
010 164-0355 Bottom bearing large 1
011 164-1096 Positive lead 1
012 164-0345 Strain relief (OBSOLETE) 2
013 264-0314 Carbon brush spring 4
014 991-1505 Carbon brush (sold individually) 4
015 999-0111 Screw 10-32 x 1/2 round head slotted brass 4
016 164-0328 Washer 1 7/8 wave 1
017 164-0349 Oil seal 1
018 164-0350 Gear box housing 1
019 164-0352 Top bearing small 1
020 164-0353 Gear shaft 1
021 164-0132 Square keyway 1/4 x 1/4 1
022 164-0355 Bottom bearing large 1
023 164-0356 O-ring 1
024 164-0357 End cap 1
025 164-0358 Oil seal 1
026 164-0359 Snap ring 1
027a 164-0351 Gear box assembly 1 (includes 017-026) (OEM)
027b 991-5115 Gear box assembly 1 (includes 017-026) (also need to order 027c) (NON-OEM)
027c 999-0562 Bolt 3/8-16 x 1 hex head stainless steel 4 (needed with 027b)

Rear Cover Assembly

#PartDescription ReqNotesAvailability
001 170-0099 Main harness (OBSOLETE) 1
002 170-0049 Control handle pin (OBSOLETE) 2
003 999-0625 Screw 1/4-20 x 1 1/4 pan head phillips stainless steel 2
004 999-0060 Washer 1/4 split lock plain finish 2
005 170-0050 Control handle (OBSOLETE) 2
006 170-0051 Control handle grip 2
007 999-0431 Screw 8-32 x 1/4 set socket cup point alloy plain finish 2
008 170-0053 Key switch with 2 keys 1
009 170-8261 Knob solution flow module (OBSOLETE) 1
010 170-0058 Rocker switch 2 position 6 prong 1
011 170-0089 Rocker switch (OBSOLETE) 1
012 999-0333 Screw 10-24 x 1/2 pan head phillips stainless steel 10
013 170-0059 Gasket 2
014 170-0103 Panel assembly (OBSOLETE) 1
015 999-0626 Screw 3/8-16 x 3 carriage head stainless steel 2
016 999-0396 Screw 1/4-20 x 1/2 pan head slotted stainless steel 1
017 170-0066 Stationary handle (OBSOLETE) 2
018 999-0318 Washer 3/8 external star lock zinc plated 1
019 N/A Not available 1 Wiring label
020 170-0061 Cover hinge (OBSOLETE) 1
021 999-0081 Screw 1/4-20 x 5/8 pan head slotted zinc 9
022 N/A Not available Wiring label
023 999-0294 Nut 1/4-20 hex nylon lock type NE stainless steel 21
024 170-0071 Collar (OBSOLETE) 1
025 170-0067 Centering bracket (OBSOLETE) 2
026 170-0068 Control handle spring (OBSOLETE) 2
027 170-0064 Stud 1/4-20 2
028 170-0063 Insulated stand off 2
029 170-0028 Solution control cable assembly 1
030a 170-0106 Rear cover (OBSOLETE) 1 for 38I and 32I
030b 170-0107 Rear cover (OBSOLETE) 1 for 26I
031 999-0121 Screw 5/16-18 x 1/2 cup point socket set alloy plain finish 4
032 170-0072 Cover support weldment (OBSOLETE) 1
033 999-0105 Washer 5/16 external star lock zinc plated 4
034 999-0211 Nut 5/16-18 hex nylon insert lock zinc plated 2
035 170-0108 Time delay relay 1
036 999-0628 Nut 3/8-16 hex jam stainless steel 2
037 999-0031 Bolt 5/16-18 x 1 hex head grade 5 zinc plated 4
038 170-0037 Switch/sequencer kit 1
039 172-2805 36V contactor 1
040 991-1223 36V solenoid contactor with 4 post 3
041 999-0630 Washer 3/4 SAE flat 1
042 272-1322 Motor contactor 2 (forward/reverse traverse)
043 170-0078 Tank stop bushing (OBSOLETE) 2
044 170-0079 Release pin 2
045 999-0575 Nut 5/8-18 hex jam plain finish 2
046 170-0093 Warning plate (OBSOLETE) 1
047a 170-0081 Main frame (OBSOLETE) 1 for 32I and 38I
047b 170-0082 Main frame (OBSOLETE) 1 for 26I
048 170-0034 Squeegee lift cable 1
049 170-0109 Cotter hairpin 2
050 170-0088 Flanged bearing (OBSOLETE) 4
051 991-1632 25amp circuit breaker 1 vacuum
052 170-0092 30amp circuit breaker (OBSOLETE) 1
053 991-1627 5amp circuit breaker 1 brush head
054 999-0629 Screw 1/4-20 x 3/4 pan head thread cutting slotted zinc 5
055 170-0110 Squeegee lift handle 1
056 170-0111 Vacuum switch assembly (OBSOELTE) 1
057 999-0631 Bolt 3/8-16 x 5/8 hex head grade 5 zinc plated 1
058 170-0121 Wear plate (OBSOLETE) 1
059 999-0630 Washer 3/4 SAE flat 1 (for Vision 32I & 38I)
060 170-0112 Shoulder screw (OBSOLETE) 1
061 170-0113 Spring (OBSOLETE) 1
062 170-0122 Squeegee lift lever (OBSOLETE) 1
063 999-0227 Nut 6-32 hex nylon insert lock jam zinc plated 4
064 170-0090 Power connector bracket (OBSOLETE) 1
065 999-0511 Screw 6-32 x 1 pan head phillips zinc plated 4
066 998-0057 Cable assembly with plug 1
067 170-0114 Squeegee lift bracket (OBSOLETE) 1
068 170-0115 Squeegee lift shaft (OBSOLETE) 1
069 170-0116 Cable lever assembly (OBSOLETE) 1
070 170-0117 Spacer 1
071 999-0297 Bolt 1/4-20 x 1 hex head stainless steel 1
072 154-3992 Washer 3/16 star 2
073 999-0333 Screw 10-24 x 1/2 pan head phillips stainless steel 2
074 999-0549 Washer 5/16 x 3/4 SAE flat stainless steel 1
075 375-7487 Rivet 1/8 x 5/16 inch (OBSOLETE) 2
076 170-0062 Diode 6
077 991-1630 35amp circuit breaker 2 (brush)
078 170-0118 5 second relay (OBSOLETE) 1
079 999-0260 Washer 1/2 internal starlock 1
080 999-0160 Washer 1/4 x 1 1/4 fender zinc plated 4
081 170-0119 Diode assembly 1
082 991-1635 Key 1
083 170-0100 Hose clamp 1
084 999-0334 Bolt 1/4-20 x 3/4 inch hex head stainless steel 16
085 999-0335 Washer 1/4 x 5/8 SAE flat stainless steel 2
086 999-0297 Bolt 1/4-20 x 1 hex head stainless steel 2
N/S 170-7054 Toggle switch 1 Forward-Reverse
N/S 170-2149 Vacuum strainer 1

Solution/Vacuum Assembly

#PartDescription ReqNotesAvailability
001 170-0258 Hose elbow (OBSOLETE) 1
002 999-0211 Nut 5/16-18 hex nylon insert lock zinc plated 6
003 170-0259 Bracket (OBSOLETE) 1
004 170-0260 Solution hose 1
005 997-2002 Hose clamp #6 6
006 170-0261 Elbow 2
007 170-0028 Solution control cable assembly 1
008 999-0333 Screw 10-24 x 1/2 pan head phillips stainless steel 6
009 170-0006 Manual solution valve 1
010 170-0262 Spacer 1
011 170-0263 Cable clip 1
012 999-0294 Nut 1/4-20 hex nylon lock type NE stainless steel 1
013 170-0264 Hose barb 1
014 164-0065 Filter screen 1
015 164-0182 Hose barb and collar 1
016 170-0033 Solution hose 2
017 997-2007 Hose clamp 5
018 999-0394 Bolt 1/4-20 x 1 3/4 hex head grade 5 zinc plated 1
019 170-0041 39 inch drain hose 1
020 164-0218 Nylon hose clamp 2
021 170-0043 Drain valve 2
022 170-0032 Drain valve gasket 2
023 170-0042 Drain valve handle 2
024 170-0268 Drain chain assembly 4
025 999-0477 Screw 10-24 x 5/16 truss head phillips zinc 2
026 999-0576 Screw 8-18 x 1/2 pan head phillips self-drilling ss 2
027 170-0269 19 inch solution drain hose 1
028 999-0081 Screw 1/4-20 x 5/8 pan head slotted zinc 4
029 170-0178 Bracket 2
030a 164-0089 Squeegee vacuum hose with cuffs 1
030b 991-8568 Squeegee vacuum hose 1
030c 991-8568 Squeegee vacuum hose 1 (NON-OEM)
031a 170-0271 Hose adaptor assembly (OBSOLETE) 1
031b 170-0272 Squeegee adaptor assembly (OBSOLETE) 1
032 170-0273 O-ring 2
033 999-0165 Bolt 1/4-20 x 4 hex head grade 5 zinc plated 3
034 999-0335 Washer 1/4 x 5/8 SAE flat stainless steel 5
035 170-0274 Vacuum motor spacer 3
036 170-0275 Vacuum assembly adapter for 38I & 32I (OBSOLETE) 1
037 170-0276 Vacuum assembly adapter for 26I (OBSOLETE) 1
038a 270-0102 36V 3 stage vacuum motor 1 (OEM)
038b 991-1202 36V 3 stage vacuum motor tangential 1 (NON-OEM)
038c 991-1222 Plastic covered carbon brush (sold individually)
038d 991-1234 Vacuum motor rotating fan 1
039a 170-0279 Contact 4
039b 170-0280 Connector housing (black) 2
039c 170-0281 Connector housing (blue) 2
040 170-0282 Solution tank lid 1
041 170-0283 Solution tank lid gasket (OBSOLETE) 1
042a 170-0284 Solution tank for 32I (OBSOLETE) 1
042b 170-0285 Solution tank for 26I (OBSOLETE) 1
042c 170-0286 Solution tank for 38I (OBSOLETE) 1
043 170-0287 Tank support base (OBSOLETE) 1
044 170-0288 Rod support assembly 1
045 N/A Not available 1 Vacuum motor hose
046 170-0289 Top support weldment (OBSOLETE) 1
047 170-0290 Strainer (OBSOLETE) 1
048 170-0023 Recovery tank lid gasket 1
049 170-0022 Recovery tank lid 1
050 170-0291 Float switch kit 1
051 170-0292 Strain relief 1
052 170-0293 Seal 1
053 170-0294 Nut 1/2 conduit lock 1
054a 170-0295 Recovery tank 38I & 32I (OBSOLETE) 1
054b 170-0296 Recovery tank for 26I (OBSOLETE) 1
055 999-0334 Bolt 1/4-20 x 3/4 inch hex head stainless steel 2 (for 38I & 32I)
N/S 170-6038 Tank lid gasket 1
N/S 991-2105 SB50 50amp charger plug with pins (gray)

Squeegee and Squeegee Arm Assembly

#PartDescription ReqNotesAvailability
001 999-0626 Screw 3/8-16 x 3 carriage head stainless steel 2
002 170-7126 Air duct (OBSOLETE) 1
003a 170-0147 Clamp weldment 1 for 32I
003b 170-0148 Clamp weldment 1 for 26I
003c 170-0182 Clamp weldment (OBSOLETE) 1 for 38I
004 170-0150 End clamp (OBSOLETE) 2
005 999-0634 Bolt 1/4-20 x 1 1/2 hex head full thread grade 5 zinc plated 2
006a 170-0151 Squeegee blade 33 inch gum rubber rear (tan) 1 for 32I (OEM)
006b 994-0012 Squeegee blade 33 inch gum rubber rear (tan) 1 for 32I (NON-OEM)
006c 170-0152 Squeegee blade 38 1/4 inch gum rubber rear (tan) 1 for 26I (OEM)
006d 994-0013 Squeegee blade 38 1/4 inch gum rubber rear (tan) 1 for 26I (NON-OEM)
006e 170-0183 Squeegee blade 47 3/4 inch gum rubber rear (tan) 1 for 38I (OEM)
006f 994-0016 Squeegee blade 48 inch gum rubber rear (tan) 1 for 38I (NON-OEM)
006g 170-7197 Squeegee blade rear tan gum rubber 33 inch 1 Fits Vision V
007a 170-0154 33 inch spacer 2 for 32I
007b 170-0155 28 inch spacer 2 for 26I
007c 170-0184 38 inch spacer 2 for 38I
008a 170-0157 Squeegee blade 40 3/8 inch neoprene front (black) 1 for 32I (OEM)
008b 994-0014 Squeegee blade 40 3/8 inch neoprene front (black) 1 for 32I (NON-OEM)
008c 170-0158 Squeegee blade 35 7/8 inch gum rubber front (black) 1 for 26I (OEM)
008d 994-0015 Squeegee blade 36 inch gum rubber front (black) 1 for 26I (NON-OEM)
008e 170-0185 Squeegee blade 46 1/4 inch neoprene front (black) 1 for 38I (OEM)
008f 994-0017 Squeegee blade 46 inch neoprene front (black) 1 for 38I (NON-OEM)
008g 170-1840 Squeegee blade front black notched 33 inch (OBSOLETE) 1 Fits Vision V (OEM)
009 999-0628 Nut 3/8-16 hex jam stainless steel 6
010a 170-0160 Squeegee weldment 1 for 32I
010b 170-0161 Squeegee weldment 1 for 26I
010c 170-0186 Squeegee weldment (OBSOLETE) 1 for 38I
011 999-0032 Washer 3/8 USS flat plain finish 11
012 170-0163 Guide wheel 2
013 999-0107 Bolt 3/8-16 x 2 hex head grade 5 zinc plated 2
014 170-0171 Knob 2
015 170-9420 Gasket 1
016 170-0165 Wheel (OBSOLETE) 2
017 170-0172 Tube bracket (OBSOLETE) 1
018 999-0334 Bolt 1/4-20 x 3/4 inch hex head stainless steel 4
019 999-0335 Washer 1/4 x 5/8 SAE flat stainless steel 5
020 999-0069 Nut 5/16-18 hex 2
021 999-0294 Nut 1/4-20 hex nylon lock type NE stainless steel 2
022 170-0178 Bracket 2
023 170-0177 Squeegee adjustment stud 2
024 170-0174 Rear arm weldment (OBSOLETE) 1
025 170-0187 Pin bracket weldment 1
026 999-0513 Nut 3/8-16 nylon insert lock type NE stainless steel 5
027 999-0244 Bolt 1/4-20 x 2 1/2 hex head grade 5 zinc plated cap 1
028 170-0140 Squeegee actuator pin 1
029 170-0188 Squeegee lift bar (OBSOLETE) 1
030 999-0636 Screw 5/16-18 x 2 socket head shoulder 1
031 999-0227 Nut 6-32 hex nylon insert lock jam zinc plated 4
032 999-0637 Screw 1/4-20 x 3 1/2 socket head alloy plain finish 1
033 170-0179 Front arm weldment 1
034 999-0211 Nut 5/16-18 hex nylon insert lock zinc plated 3
035 170-0175 Pressure spring (OBSOLETE) 2
036a 170-0167 Squeegee assembly (OBSOLETE) 1 for 32I
036b 170-0168 Squeegee assembly (OBSOLETE) 1 for 26I
036c 170-0189 Squeegee assembly (OBSOLETE) 1 for 38I
037 170-0135 Cotter pin (OBSOLETE) 3
038 999-0562 Bolt 3/8-16 x 1 hex head stainless steel 1
039 999-0638 Bolt 3/8-16 x 2 1/4 hex head 2
040 170-0166 Squeegee gripping pad 1
042 999-0132 Bolt 5/16-18 x 3/4 hex head grade 5 zinc plated 2
043 170-0145 Clevis pin 1
044 170-0135 Cotter pin (OBSOLETE) 1
045 170-0704 Pivot arm (OBSOLETE) 1
046 999-0635 Nut 3/8-16 hex stainless steel 2
N/S 170-1818 Squeegee hose 1

Traverse Assembly

#PartDescription ReqNotesAvailability
001 999-0632 Washer 1/4 split lock stainless steel 4
002 999-0038 Bolt 3/8-16 x 1 hex head grade 5 zinc plated 12
003 170-0127 Brake spring 1
004 999-0294 Nut 1/4-20 hex nylon lock type NE stainless steel 4
005 999-0335 Washer 1/4 x 5/8 SAE flat stainless steel 5
006 170-0113 Spring (OBSOLETE) 1
007 999-0211 Nut 5/16-18 hex nylon insert lock zinc plated 3
008 170-0128 Brake arm spacer (OBSOLETE) 1
009 170-0129 Brake arm (OBSOLETE) 1
010 170-0130 Brake rod swivel 1
011 170-0131 Brake rod (OBSOLETE) 1
012 170-0145 Clevis pin 1
013 999-0162 Bolt 5/16-18 x 1 1/4 hex head grade 5 zinc plated 1
014 170-0132 Brake lever (OBSOLETE) 1
015 170-0133 Brake pedal spacer (OBSOLETE) 1
016 999-0132 Bolt 5/16-18 x 3/4 hex head grade 5 zinc plated 5
017 170-0134 Brake pedal bracket (OBSOLETE) 1
018 170-0135 Cotter pin (OBSOLETE) 3
019 999-0549 Washer 5/16 x 3/4 SAE flat stainless steel 3
020 999-0109 Bolt 5/16-18 x 1 1/2 hex head grade 5 zinc plated 1
021 164-0132 Square keyway 1/4 x 1/4 1
022 170-0137 Drive motor 1
023 170-0457 Strap (OBSOLETE) 1
024 999-0513 Nut 3/8-16 nylon insert lock type NE stainless steel 12
025 N/A Not available 1 (Drive wheel assembly)
026 999-0334 Bolt 1/4-20 x 3/4 inch hex head stainless steel 4
027a 991-2011 Caster wheel assembly 2
027b 170-7201 Caster wheel
028 999-0034 Washer 3/8 split lock plain finish 8
029 999-0095 Screw 1/4-20 x 3/8 cup point socket set alloy plain finish 2
030 999-0028 Washer 5/16 split lock plain finish 5
031 999-0160 Washer 1/4 x 1 1/4 fender zinc plated 1
032 999-0513 Nut 3/8-16 nylon insert lock type NE stainless steel 1
033 991-0101 Chain (sold by the link) 78
034a 170-0141 Drive sprocket (OBSOLETE) 1
034b 991-8554 SPROCKET-DRIVE MOTOR 898550 1
035 991-0103 Master link 1
036 170-0142 Drive sprocket 1
037 170-0143 Spacer washer (OBSOLETE) 4
038 170-0144 Axle strap (OBSOLETE) 2
039 170-0015 Drive wheel axle shaft (OBSOLETE) 1
040 170-0016 Grease fitting 1

Traverse Motor Assembly

#PartDescription ReqNotesAvailability
000 170-0137 Drive motor 1
002 170-0379 Wave washer 1
003 372-1890 Bearing (rear) 1
004 170-0381 Armature assembly (OBSOLETE) 1
005 170-0321 Front end bearing 1
006 170-0382 Oil seal 1
007 170-0703 Bottom end bracket (OBSOLETE) 1
008 170-0707 Bolt 1/4-20 x 5-3/4 hex head (OBSOLETE) 2
009 N/A Not available 1
010 170-0384 Field assembly (OBSOLETE) 1
011 170-0385 Male terminal housing connector 1
012 170-0386 Male terminal (OBSOLETE) 1
013 170-0387 Brush holder assembly (OBSOLETE) 4
014 372-1685 Springs 4
015 164-0325 Carbon brush with lead and terminal (sold individually) 1