Wiring Diagram with Onboard Charger

#PartDescription ReqNotesAvailability
001 164-6445 Wire harness 1
002 164-6446 Wire assembly 1 (solenoid to brush breaker)
003 164-6447 Wire assembly 1 (brush breaker to shunt)
006 164-6427 Wire assembly 1 (shunt to motor)
007 164-1321 Wire assembly 1 (connector to battery)
008 164-6350 Wire assembly 1 (connector to solenoid and standoff)
009 164-6470 Hour meter leads (OBSOLETE) 1
010 164-6478 Wire assembly 1
N/S 164-0023 Toggle switch 1
N/S 991-2112 175amp charger plug with pins (gray) SB175 2
N/S 164-1577 36V drive motor 1
N/S 991-1621 10amp circuit breaker 1
N/S 164-1660 Key switch and key 1
N/S 164-0070 36V Curtis speed control 1
N/S 162-9027 36V 25amp onboard battery charger (Dual Pro) (AGM/wet) 1 (Dual Pro) (Does not include green wire. Open the control panel and in the main harness bundle (running up from the trio to the LCD/switches) there should be a black wire taped up (it may be tagged remote/off board charger only). Release that wire and run it up to the E-Stop and attach it into the terminal where the green wire is connected.)
N/S 164-6480 4amp fuse 1
N/S 164-6476 36V onboard battery charger (OBSOLETE) 1 (NSS)
N/S 991-1615 90amp circuit breaker 1
N/S 164-0027 36V solenoid contactor 1
N/S 164-6472 36V brush motor 1
N/S 164-0283 Indicator light with clip (green) 1
N/S 164-0026 Snap switch 1
N/S 164-6465 Wire assembly key switch adapter 1
N/S 164-1451 Hour meter 1
N/S 164-6477 Onboard charger extension cord 1
N/S 164-3029 Shunt 1
N/S 172-2039 5K potentiometer 1
N/S 164-6080 Brush assembly (OBSOLETE) 6
N/S 164-4612 Wire tie 5
N/S 164-0310 Insulated stand off 1
N/S 998-0010 Battery jumper cable - ring type (red) 5 (For use with top, bolt type post batteries)
N/S 991-6025 Wire 4 x14.5, 3/8 ring x 3/8 ring 5 (NON-OEM)
N/S 164-0022 Battery meter 1
N/S 164-0024 RPM meter 1
N/S 162-0005 6V 305Ah wet battery (SNSR) 6
N/S 162-0046 6V 335Ah AGM battery (Group J305) (SNSR) 6