USAfixTM - Repair Guide (RG) - Master Email RG
- Replace Clutch/Switch Wiring Harness
 Level of Difficulty - MEDIUM  Estimated Completion Time - 30 minutes
NSS - COMMANDER 27 VACTRAC

Tools Required
Tool 
Screwdriver-flat tip
Wire cutters

Parts Required
PartDescriptionPriceAvailablePurchase
160-0058 Clutch switch kit assembly w/cord and hardware (OBSOLETE) $101.48 Back Order Qty:


Step Procedure & Parts & Tools
1 TURN OFF TANK

2 DISCONNECT FUEL LINE

3 OPEN TANK STRAP

4 REMOVE TANK

5 REMOVE 4 SCREWS FROM SWITCH BOX
Screwdriver-flat tip

6 REMOVE SWITCH BOX FROM HANDLE

7 OPEN SWITCH BOX

8 PULL 2 BLUE WIRE CONNECTORS FROM SWITCH

9 LAY MACHINE ON ITS SIDE

10 PULL TO DISCONNECT BLUE CONNECTOR AT BASE

11 DISCONNECT THE WHITE AND BLACK WIRES FROM SWITCH AT BASE

12 CUT ALL CABLE TIES ON HANDLE
Wire cutters

13 FROM HANDLE, PULL WIRE HARNESS TO REMOVE IT FROM THE MACHINE

14 REVERSE STEPS 1 THRU 12 TO REASSEMBLE MACHINE AND INSTALL A NEW CLUTCH SWITCH WIRING HARNESS
Screwdriver-flat tip
Wire cutters

PartDescriptionPriceQty
160-0058 Clutch switch kit assembly w/cord and hardware (OBSOLETE) $101.48 Qty: