| Step | | Procedure & Parts & Tools |
| 1 |
|
THE STARTER MOTOR IS LOCATED ON THE RIGHT SIDE (STANDING IN THE OPERATOR POSITION) OF THE MOTOR.
|
| 2 |
|
REMOVE THE VAC HOSE FROM THE LEFT SIDE OF THE FUEL REGULATOR. NOTE: THIS WILL ALLOW THE FUEL REGULATOR TO BE MOVED OUT OF THE WAY IN STEP 4.
|
| 3 |
|
REMOVE THE 2 BOLTS FROM UNDERNEATH THE FUEL REGULATOR ON THE UNDERSIDE OF THE BUFFER FRAME.
| Wrench-7/16 in |
|
|
| 4 |
|
MOVE THE FUEL REGULATOR ASSEMBLY AND WIRES OUT OF THE WAY TO ACCESS THE STARTER.
|
| 5 |
|
MOVE THE RED POSITIVE BATTERY CABLE BOOT OUT OF THE WAY TO EXPOSE THE NUT UNDERNEATH.
|
| 6 |
|
REMOVE THE NUT HOLDING THE POSITIVE BATTERY CABLE.
| Ratchet-Socket standard 7/16 in |
|
|
| 7 |
|
REMOVE THE RED POSITIVE BATTERY CABLE FROM THE STARTER.
|
| 8 |
|
WRAP THE POSITIVE BATTERY CABLE END WITH BLACK ELECTRICAL TAPE SO THE CABLE DOESN'T ACCIDENTALLY COME IN CONTACT WITH GROUNDED PARTS OF THE MACHINE WHICH WILL CAUSE AN ARC SPARK.
|
| 9 |
|
REMOVE THE BOLT FROM THE TOP LEFT SIDE OF THE STARTER.
| Ratchet-Socket metric 12mm |
|
|
| 10 |
|
REMOVE THE BOLT FROM THE TOP RIGHT SIDE OF THE STARTER. NOTE: WHEN REMOVING THIS BOLT, HOLD THE STARTER SO IT DOESN'T FALL.
| Ratchet-Socket metric 12mm |
|
|
| 11 |
|
REMOVE THE STARTER FROM THE MACHINE.
|
| 12 |
|
REVERSE STEPS 2 THRU 11 TO INSTALL A NEW STARTER. NOTE: TEST START THE MACHINE A FEW TIMES TO CHECK OPERATION OF THE STARTER.
|