USAfixTM - Repair Guide (RG) - Master Email RG
- Replacing the Belt
 Level of Difficulty - Medium  Estimated Completion Time - 20 minutes
NILFISK - AQUACLEAN 18

Tools Required
Tool 
Ratchet-Socket metric 12mm
Screwdriver-flat tip

Parts Required
PartDescriptionPriceAvailablePurchase
172-4049 Poly-v belt $40.04 Back Order Qty:


Step Procedure & Parts & Tools
1 Lay machine on its right side. Remove the 5 screws from the belt cover with a 12mm socket and ratchet wrench.
Ratchet-Socket metric 12mm

2 Remove the belt cover and brush pulley cover.

3 Roll the brush and belt by hand, until belt rolls off the end of the motor pulley.

5 Slide out the brush pulley using a flat tip screwdriver. Reverse the entire process to install the belt
Screwdriver-flat tip

PartDescriptionPriceQty
172-4049 Poly-v belt $40.04 Qty: