USAfixTM - Repair Guide (RG) - Master Email RG
- Replace the belt tensioning roller's bushing
 Level of Difficulty - Medium  Estimated Completion Time - 30 minutes
TASKI - ERGODISC 200

Tools Required
Tool 
Screwdriver-phillips
Wrench-Allen metric 6.0mm

Parts Required
PartDescriptionPriceAvailablePurchase
192-0607 Belt tensioner roller $10.03 Back Order Qty:
192-7058 Tension lever $62.91 Back Order Qty:


Step Procedure & Parts & Tools
1 FOLD THE HANDLE DOWN OVER MOTOR AND FLIP MACHINE SO BRUSH SHROUD IS FACING UP.

2 REMOVE THE 9 BOLTS HOLDING THE WEIGHT.
Screwdriver-phillips

3 REMOVE THE 3 SCREWS HOLDING THE BRUSH SHROUD.
Screwdriver-phillips

4 REMOVE THE 3 SCREWS HOLDING THE FLANGE COUPLING.
Screwdriver-phillips

5 PULL THE FLANGE COUPLING FROM THE MACHINE.

6 USE RECOMMENDED TOOL (LISTED) TO REMOVE THE SPRING. INSERT TOOL AS SHOWN, MOVE HANDLE DOWN UNTIL THE SPRING BRACKET RELEASES.

PartDescriptionPriceQty
192-7058 Tension lever $62.91 Qty:  
7 REMOVE THE SPRING BRACKET.

8 PULL THE BELT FROM THE MACHINE.

9 LOCATE THE BELT TENSIONER ROLLER AND BEARING.

10 LOOSEN THE BOLT HOLDING THE BELT TENSIONER ROLLER AND BEARING.
Wrench-Allen metric 6.0mm

11 PULL TO REMOVE THE BOLT AND ROLLER/BEARING FROM THE MACHINE.

12 REVERSE STEPS 1 THRU 11 TO INSTALL A NEW BELT TENSIONER ROLLER AND BEARING.

PartDescriptionPriceQty
192-0607 Belt tensioner roller $10.03 Qty: