USAfixTM - Repair Guide (RG) - Master Email RG
- Replace the pulley bearing
 Level of Difficulty - Medium  Estimated Completion Time - 45 minutes
TASKI - ERGODISC 200

Tools Required
Tool 
Screwdriver-phillips
Snap ring pliers

Parts Required
PartDescriptionPriceAvailablePurchase
192-0608 Pulley with bearings $37.55 Back Order Qty:
192-5836 Pulley with bearings $38.81 Back Order Qty:
192-7058 Tension lever $62.91 Back Order Qty:


Step Procedure & Parts & Tools
1 FOLD THE HANDLE DOWN OVER MOTOR AND FLIP MACHINE SO BRUSH SHROUD IS FACING UP.

2 REMOVE THE 9 BOLTS HOLDING THE WEIGHT.
Screwdriver-phillips

3 REMOVE THE 3 SCREWS HOLDING THE BRUSH SHROUD.
Screwdriver-phillips

4 REMOVE THE 3 SCREWS HOLDING THE FLANGE COUPLING.
Screwdriver-phillips

5 PULL THE FLANGE COUPLING FROM THE MACHINE.

6 USE RECOMMENDED TOOL (LISTED) TO REMOVE THE SPRING. INSERT TOOL AS SHOWN, MOVE HANDLE DOWN UNTIL THE SPRING BRACKET RELEASES.

PartDescriptionPriceQty
192-7058 Tension lever $62.91 Qty:  
7 REMOVE THE SPRING BRACKET.

8 PULL THE BELT FROM THE MACHINE.

9 SLIDE THE PULLEY COVER FROM THE MACHINE.

10 PULL THE SPINDLE OUT FROM MACHINE. NOTE: WHEN REPLACING SPINDLE, GREASE THE SPINDLE SEAL LIP (SHOWN BY ARROW)

11 REMOVE THE SNAP RING
Snap ring pliers

12 PULL THE PULLEY AND BEARING FROM MACHINE.

13 REVERSE STEPS 1 THRU 12 TO INSTALL A NEW PULLEY AND BEARING. NOTE: THERE IS A FRONT AND BACK TO THE PULLEY.

PartDescriptionPriceQty
192-0608 Pulley with bearings $37.55 Qty:  
192-5836 Pulley with bearings $38.81 Qty: