USAfixTM - Repair Guide (RG) - Master Email RG
- Adjust the belt tensioner
 Level of Difficulty - HIGH  Estimated Completion Time - 15 minutes
TASKI - ERGODISC 200

Tools Required
Tool 
Screwdriver-phillips

Parts Required
PartDescriptionPriceAvailablePurchase
192-7058 Tension lever $62.91 Back Order Qty:


Step Procedure & Parts & Tools
1 FOLD THE HANDLE DOWN OVER MOTOR AND FLIP MACHINE SO BRUSH SHROUD IS FACING UP.

2 REMOVE THE 9 BOLTS HOLDING THE WEIGHT.
Screwdriver-phillips

3 REMOVE THE 3 SCREWS HOLDING THE BRUSH SHROUD.
Screwdriver-phillips

4 REMOVE THE 3 SCREWS HOLDING THE FLANGE COUPLING.
Screwdriver-phillips

5 PULL THE FLANGE COUPLING FROM THE MACHINE.

6 USE RECOMMENDED TOOL (LISTED) TO TIGHTEN SPRING. INSERT TOOL AS SHOWN, MOVE HANDLE DOWN UNTIL THE SPRING BRACKET LOCKS IN PLACE. REVERSE STEPS 1 THRU 5 TO REASSEMBLE THE MACHINE.

PartDescriptionPriceQty
192-7058 Tension lever $62.91 Qty: